ROCKLER 66869 Fence Featherboard Instructions

: June 10, 2024
: ROCKLER

Table of Contents

Fence Featherboard Instructions
- Setup
GENERAL SAFETY WARNINGS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ROCKLER 66869 Fence Featherboard

Fence Featherboard Instructions

PLEASE SEE OTHER SIDE FOR IMPORTANT SAFETY WARNINGS

|
---|---

To avoid serious injury, keep hands and fingers away from spinning blades and bits. Always maintain awareness of cutters

NEVER position the featherboard directly above the blade of a table saw or the bit on a router table. This could lead to dangerous kickback, potentially resulting in serious injury.

Make sure that the featherboard is oriented correctly. The fingers should be pointed in the direction you will be feeding the workpiece. (The correct feed direction is marked with an arrow on the featherboard.)
Always use a push block or push stick to advance the workpiece past the blade or bit.

Setup

Assemble your featherboard as shown **in Fig. 1.

Note** that the nylon washers need to be used only with the Rockler or Bench Dog Pro Fence (sold separately) or any other fence that has a T-Track set back slightly from the face of the fence.

Slide the featherboard onto your fence so that the T-bolts fit into the T-track or T-slot of your fence. Make sure that the fingers of the featherboard are pointed in the direction of feed. Position the featherboard as desired, remembering to keep it clear of cutters.
Slide the workpiece under the featherboard. The first finger of the featherboard is shorter than the rest. Adjust the featherboard so that the first finger is against the workpiece and the featherboard is parallel to the table surface. This will provide optimal downward pressure as the workpiece is pushed forward. Fig. 2.
Fully tighten the four-star knobs to secure the featherboard in place.

Check Rockler.com for updates. If you have further questions, please contact our Technical Support Department at 1-800-260-9663 or support@rockler.com

GENERAL SAFETY WARNINGS

This product is designed only for specific applications as defined in the instructions and should not be modified or used for any manner not described in these instructions. Use only recommended accessories. Before using the Fence Featherboard: READ, UNDERSTAND and FOLLOW ALL INSTRUCTIONS AND SAFETY WARNINGS. KEEP THESE INSTRUCTIONS READILY AVAILABLE FOR FUTURE REFERENCE.

Always confirm that you are using the most recent version of the Instructions and safety warnings for your product (see the Instructions link on the product page at Rockler.com).
Before using another tool with this product, always read, understand and follow the instructions and safety warnings in the owner’s manual for that tool. If you do not have the owner’s manual, obtain one from the tool’s manufacturer before using it with this product.
Before using any chemical with this product, always read, understand and follow all safety warnings and guidelines in the manufacturer’s Safety Data Sheet (SDS; formerly called “MSDS”), especially regarding: · How to safely use the chemical, including potential hazards and recommended first aid measures; · Personal safety equipment required to safely use the chemical (e.g. gloves, eye protection, mask/respirator, etc.); · Proper and safe handling, storage and disposal of the chemical.
Before using this product, review and verify that all tools to be used with it have safety equipment installed and are in proper working order as defined by the tool’s owner’s manual.
Do not use this product until you have read and are confident you understand the instructions.
The user assumes all risk and responsibility for the proper and safe use of this product and for ensuring product suitability for the intended application.
It is the sole responsibility of the purchaser of this product to ensure that anyone you allow to use this product reads and complies with all instructions and safety precautions outlined in this manual prior to use.

Follow all standard shop safety practices, including:

Keep children and bystanders away from the tool operating area;
Do NOT use power tools in explosive environments, or in the presence of flammable liquids, fumes or dust;
TURN OFF AND UNPLUG all power tools BEFORE making any adjustments or changing accessories;
Remain alert and use good judgment. Do not use this product if you are in any way impaired by medications, alcohol, drugs or fatigue;
Keep your work area well lit and clean;
Dress appropriately. Secure loose clothing, remove all jewelry and tie up long hair before using this product;
ALWAYS wear safety glasses, hearing protection and respiratory protection that complies with NIOSH/OSHA/ANSI safety standards;
Use dust collection tools and dust face masks to reduce exposure to dust;
Use safety equipment such as feather boards, push sticks and push blocks, etc., when appropriate;
Maintain proper footing at all times and do not overreach;
Do NOT force woodworking tools.

These warnings and instructions do NOT represent the total of all information available regarding tool safety, use and technique. Always seek out opportunities to learn more and improve your skills and knowledge.
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.

Danger indicates a hazardous situation that, if not avoided, will result in death or serious injury.
Warning indicates a hazardous situation that, if not avoided, could result in death or serious injury.
Caution indicates a hazardous situation that, if not avoided, may result in minor or moderate injury or property damage.

Notice indicates important or helpful information and/or user tips.

Distributed by Rockler Companies, Inc.
4365 Willow Dr. Medina, MN 55340
1-800-279-4441
www.rockler.com