HALCYON DD1050 45WPK Dali Dimming LED Driver Instruction Manual
- June 10, 2024
- HALCYON
Table of Contents
DD1050 45WPK Dali Dimming LED Driver
Instruction Manual
Features:
– DALI-2 certified LED driver
– Dimmable with DALI signal
– Independent compact design
– Configurable constant current output via dip-switch
– Swifch-Dim function
– Dimming range 1…100%
– Analogue flicker-free dimming
– Open circuit, short circuit, over load protection
– Suitable for use in emergency lighting systems
– Protection class
Specifications ,Characteristics:
-Techfrical data
Model No | DDI050 45wPK | DDI 4C0 75WPK |
---|---|---|
Input Voltage | 220-240VAC | |
Input Frequency | 50/60Hz | |
Input Current (Full load) | 026A | 0.45A |
Mccdmum Input Power | 45w | 75W |
Standby power | ≤0.5w | |
Power Factor (Full load) | ≥ 0.95 | |
Output | 1050mA, 14-43V, 45W |
1150mA. 14-39V.45W
120OmA. 14-38V.45W
1300mA. I 4-35V.45W
1400mA, i 4-32V,45W
1500mk 14-30V,45W
1600mA, 14-28V,45W| 1050mA,25-7 1 V,75W
1150mA,25-65V.75W
1200mA25-62V.75W
1300mA25-58V,75W
14COmA,25-53v,75W
1500mA,25-50V,75W
1600mA,23-47V,75W
Control Input MU; Switch-Control|
Operating Ambient Temperature| -20 …* 50C| -20..± 40C
Case Temperature at tc Point| 80C| 85C
Dimensions(LxWxH)| 13547204mm| 159z.79430mm
Wiring
Dimensions(mm)
Dip Switch Settings:
DD1050 45WPK
1 | 2 | 3 | lout(mA) | Pout(W) | Uout(V) |
---|---|---|---|---|---|
OFF | OFF | OFF | 1050 | 15-45 | 14-43 |
ON | OFF | OFF | 1150 | 16-45 | 14-39 |
OFF | ON | OFF | 1200 | 17-45 | 14-38 |
ON | ON | OFF | 1300 | 18-45 | 14-35 |
ON | OFF | ON | 1400 | 20-45 | 14-32 |
OFF | ON | ON | 1500 | 21-45 | 14-30 |
ON | ON | ON | 1600 | 22.5-45 | 14-28 |
-Factory default setting 1050mA
DD1400 75WPK
1 | 2 | 3 | Iout(mA) | Pout(W) | Uout(V) |
---|---|---|---|---|---|
OFF | OFF | OFF | 1050 | 26-75 | 25-71 |
ON | OFF | OFF | 1150 | 29-75 | 25-65 |
OFF | ON | OFF | 1200 | 30-75 | 25-62 |
ON | ON | OFF | 1300 | 32.5-75 | 25-58 |
ON | OFF | ON | 1400 | 35-75 | 25-53 |
OFF | ON | ON | 1500 | 37.5-75 | 25-50 |
ON | ON | ON | 1600 | 37-75 | 23-47 |
Dimming Characteristics:
Functions:
DALI: In this operating mode the light level of the device is controlled
via its DALI address.
Switch-control: Alternatively the device can be controlled using switch-
inputs for mains voltage, The dimm level is saved at power-down and restored
at power-up.
– Short press (<15): switches LED driver ON and OFF.
– Long press: LED modules are dimmed. After repush the LED modules are dimmed
in the opposite direction.
– In installations with LED drivers with different dimming levels or opposite
dimming directions, all LED drivers can be synchronized to 50% dimming level
by a 15S push, switch off the light by short press one time, then long press.
Notice:
– The compatibility with other devices must be tested in advance to the
installation.
– DALI application and switch-control application can not apply to the system
at the some time
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>