HALCYON LED456 4X LED Batten Light Instruction Manual
- June 10, 2024
- HALCYON
Table of Contents
HALCYON LED456 4X LED Batten Light Instruction Manual
Description:
16 Watt LED, Non-dimmable, IP65, 4000K/6000K
40 Watt LED, Non-dimmable, IP65, 4000K / 6000K
50 Watt LED, Non-dimmable, IP65, 4000K / 6000K
Rated Voltage: 220-240V—, 50/60HZ
INSTALLATION INSTRUCTIONS
-
Switch off power.
-
Fasten the hooks to surface.
-
Open the lid of terminal block.
-
Connect driver connection and lock the water joint.
-
Installation method of connecting luminaires in parallel.
-
Cover the lid of terminal block.
-
Install the luminaire to the ceiling.
-
Switch luminaire on to test luminaire functions correctly and is electrically safe.
Installation note: Do not install on the same circuits as Metal halide,
Fluorescent and other “Low power factor” devices.
When installed on the same circuit it can cause flickering and/or premature
failure of the “high power factor” electronic drivers. The harmonic distortion
from low power factor devices alters the Waveform of the AC supply which can
cause componentry in high power factor electronic drivers to resonate, run
over temperature and fail after prolonged exposure.”
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>