tp-link AC1200 Whole Home Mesh WiFi System Installation Guide
- June 4, 2024
- tp-link
Table of Contents
tp-link AC1200 Whole Home Mesh WiFi System
Getting Started
Download the TP-Link Deco app for iOS or Android. The app will walk you through the setup.
LED Status
Each Deco has an LED light that changes color according to its status. See the explanation below.
LED DECO STATUS
- Yellow pulse Deco is resetting.
- Yellow solid Deco is starting up
- Blue pulse Deco is ready for setup
- Blue solid Deco is setting up.
- Green pulse/ White pulse Deco is upgrading firmware
- Green solid/ White solid Deco is registered and all is well.
- Red pulse Deco is disconnected from main Deco.
- Red solid Deco has an issue
Need Help?
For answers to frequently asked questions (FAQs) and technical support, please go to
-
https://www.tp-link.com
Navigate to Deco’s support page -
the Deco app
Swipe right at the main page and select? Help from the menu.
Safety Information
- Adapter shall be installed near the equipment and shall be easily accessible.
- Keep the device away from water, fire, humidity or hot environments.
- Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
- Do not use damaged charger or USB cable to charge the device.
- Do not use any other chargers than those recommended.
- Do not use the device where wireless devices are not allowed.
- Use only power supplies which are provided by manufacturer and in the original packing of this product. If you have any questions, please don’t hesitate to contact us.
Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.
Compliance
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863. The original EU declaration of conformity may be found at https://www.tp-link.com/support/ce/.
WARRANTY
For TP-Link Branded Products Only. For more information about warranty, please
visit http://www.tp-link.com/en/support
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY HAVE OTHER RIGHTS
THAT VARY FROM STATE TO STATE (OR BY COUNTRY OR PROVINCE). TO THE EXTENT
ALLOWED BY LOCAL LAW, THIS WARRANTY AND THE REMEDIES SET FORTH ARE EXCLUSIVE
AND IN LIEU OF ALL OTHER WARRANTIES, REMEDIES AND CONDITIONS.
TP-Link warrants the TP-Link branded hardware product contained in the
original packaging against defects in materials and workmanship when used
normally in according with TP-Link’ s guidelines for some period which depends
on the local service from the date of original retail purchase by the end-user
purchaser.
SPECIFICATION
- Operating Frequency/max output power: 2400MHZ~
- BETRIEBSFREQUENZ/ maximale Sendeleistung: 2483.5MHz /20dBm
- Frequenze Wireless/ Potenza max output: 5150MHz ~ 5250MHz /23dBm
Attention: This device may only be used indoors in all EU member states and EFTA countries.
GNU General Public License Notice
This product includes software code developed by third parties, including software code subject to the GNU General Public License (“GPL”). As applicable, TP-Link (“TP-Link” in this context referring to the TP-Link entity offering respective software for download or being responsible for the distribution of products that contain respective code) provides, by itself or with the support of third parties (e.g. the TP-Link Corporation Limited), mail service of a machine-readable copy of the corresponding GPL source code on CD- ROM upon request via email or traditional paper mail. TP-Link will charge for a nominal cost to cover shipping and media charges as allowed under the GPL. This offer will be valid for at least 3 years. For GPL inquiries and the GPL CD-ROM information, please contact GPL@tp-link.com or write to Suite 901, New East Ocean Centre, Tsim Sha Tsui, Hong Kong. Additionally, TP-Link provides for a GPL-Code-Centre under http://www.tp-link.com/en/support/gpl/ where machine readable copies of the GPL source codes used in TP-Link products are available for free download. Please note, that the GPL-Code-Centre is only provided for as a courtesy to TP-Link’s customers but may neither offer a full set of source codes used in all products nor always provide for the latest or actual version of such source codes. The GPL Code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For fur ther information about GNU General Public License please refer to the following website: https://static.tp- link.com/resources/document/GPL%20 License%20Terms.pdf
References
- Link: Simple, secure one-click payments
- Support | TP-Link
- Anatel — Agência Nacional de Telecomunicações
- WiFi Networking Equipment for Home & Business | TP-Link
- Support | TP-Link
- GPL Code Center | TP-Link
- Support | TP-Link
- Support | TP-Link
- Support | TP-Link
- Support | TP-Link
- Support | TP-Link
- Support | TP-Link
- WiFi Networking Equipment for Home & Business | TP-Link
- Support | TP-Link
- Support | TP-Link
- CE Regulatory Compliance | TP-Link
- GPL Code Center | TP-Link
- Support | TP-Link
- TP-Link France – Un meilleur WiFi partout
- Support | TP-Link
- Support | TP-Link
- TP-Link Magyarország
- Support | TP-Link
- Support | TP-Link
- TP-Link Product Support - Wireless Networking Equipment Support
- Support | TP-Link Australia
- Regulatory Compliance | TP-Link
- TP-Link Deutschland - Netzwerklösungen für Privat- und Businessanwender
- TP-Link Italia - dispositivi Wi-Fi per utilizzo domestico e professionale
- TP-Link Portugal - Equipamento Rede WiFi para Casa e Escritório
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>