PANDUIT PN647A Mini Com UTP RJ45 Cat 6A TG Jack Module Instruction Manual
- June 10, 2024
- PANDUIT
Table of Contents
**PANDUIT PN647A Mini Com UTP RJ45 Cat 6A TG Jack Module
**
INSTALLATION INSTRUCTIONS
TERMINATION STEPS
Notes:
- Corrosion Resistant jack modules may be re-terminated a maximum of 3 times at the wire cap and a maximum of 5 plug insertions.
- For specified performance, follow ANSI/TIA-568.2-D installation guidelines.
- Corrosion resistant jack modules can terminate 22-26 AWG solid or stranded IWC data cable with 0.062″ (1.57mm) maximum insulated conductor outside diameter.
- For technical and performance information, consult PANDUIT technical support.
As with all Communication Components, the following statements apply:
- Never install communications wiring during a lightning storm.
- Never install communications wiring in wet locations unless the jack is specifically designed for use in wet locations.
- Never touch uninsulated communications wiring or terminals unless the communication line has been disconnected at the network interface.
- Use caution when installing or modifying communication wiring.
CJE6X88** INSTALLATION BEST PRACTICES
For Instructions in Local Languages
and Technical Support:
www.panduit.com/resources/install_maintain.asp
E-mail:
techsupport@panduit.com
Phone:
866-405-6654
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>