niko 552-723X1 Zigbee Connected Motor Control User Manual

: June 10, 2024
: niko

niko 552-723X1 Zigbee Connected Motor Control

Product Information

The Niko Home Control is a wireless smart hub designed for home automation. It is a versatile device that allows users to control their home’s lighting, heating, and other electrical appliances using a smartphone or tablet. It can be connected to a wireless bridge (550-00640) to extend its range up to 30 meters. The device must be secured with a Miniature Circuit Breaker (MCB) of max. 16 A in the electrical cabinet. The device has a maximum range of 10 meters and requires a minimum of 2 meters when connected to a 230 V device.

Dimensions

552-723X1: 71mm x 39.2mm
552-72301: 29.5mm x 31.75mm
552-72321: 73mm x 39.7mm
552-72311: 73mm x 39.1mm
552-72331: 73mm x 39.7mm

Product Installation

The Niko Home Control can be installed by following the instructions provided in the user manual. The device can be used in standalone mode until it is connected to a smart hub or wireless bridge. To connect the device to a wireless hub or bridge, consult the guide provided on the website guide.niko.eu for more
information about the installation and connected use.

Pairing mode

To pair the device with a hub or bridge, press the button on the device three times within four seconds. The LED lights on the device will start flashing to signal that it is in pairing mode. The device has a maximum range of 5 meters in pairing mode.

Product Usage

Product Stand-alone use

The Niko Home Control can be used in stand-alone mode until it is connected to a smart hub or wireless bridge. In stand-alone mode, the device can switch its own contact and operate within a maximum range of 10 meters.

Product Connected use

When connected to a Niko Home Control installation, more advanced functionalities become available. To connect the device to a wireless smart hub or bridge using the Niko Home Control programming software or Niko Home app, consult the guide provided on the website guide.niko.eu for more information about the installation and connected use.

Niko Home Control programming software
The Niko Home Control programming software allows users to control their devices using a computer. It is available for both Windows and Mac operating systems. To download the software, visit www.niko.eu/article/550-99102 for Windows or www.niko.eu/article/550-99202 for Mac.

Niko Home app

The Niko Home app allows users to control their devices using a smartphone or tablet. The app is available for both iOS and Android devices and can be downloaded from the App Store or Google Play.

Connected motor control, Zigbee®

Dimensions

niko-552-723X1-Zigbee-Connected-Motor-Control-FIG-1

Wiring

niko-552-723X1-Zigbee-Connected-Motor-Control-FIG-3

This product must be secured with a Miniature Circuit Breaker (MCB) of max. 16 A in the electrical cabinet.

Zigbee® network

Network setup
Follow the Zigbee® network setup advice below to guarantee the meshing of the devices before you install the switch on the wall. More information on Zigbee® network principles: guide.niko.eu.

niko-552-723X1-Zigbee-Connected-Motor-Control-FIG-4

Installation

niko-552-723X1-Zigbee-Connected-Motor-Control-FIG-6

Dismantling

niko-552-723X1-Zigbee-Connected-Motor-Control-FIG-9

Stand-alone use

All 230 V-connected devices for Niko Home Control can be used in standalone mode until they are connected to a smart hub or wireless bridge. In stand-alone mode they switch their own contact.

Connected use

Connected to a Niko Home Control installation More advanced functionalities become available if you connect this device to your wireless smart hub (552-00001) or wireless bridge (550-00640) using the Niko Home Control programming software or Niko Home app. Consult guide.niko.eu for more information about the installation and the connected use.

Download the Niko Home Control programming software

www.niko.eu/article/550-99102 (Windows)
www.niko.eu/article/550-99202 (Mac)

Control your device with the Niko Home app

How to connect the Niko device to Niko Home Control network

Reset the Niko device when it is already connected to a Zigbee® network. See § Reset.
Follow the onboarding procedure in the Niko Home Control programming software or the Niko Home app to add new Niko Zigbee® devices.
Set the Niko Zigbee® device in pairing mode by pressing the switch button 3 x within a period of 6 seconds > See image § Pairing mode. The blue LEDs start blinking for max. 5 minutes.
The connected motor control is successfully added to the Zigbee® network when the blue LEDs are ON for 4 seconds.

Connected to a third-party Zigbee® network
Niko connected Zigbee® devices behave like standard Zigbee® devices in third- party networks that allow this operation. Consult the manufacturer’s manual for more information on the possibility to use third-party Zigbee® devices in their network. Specific Niko Home Control functions will not be enabled with Niko Zigbee® devices that are connected to a third-party Zigbee® controller/ gateway. Consult the details on guide.niko.eu. See also the disclaimer on www.niko.eu/zigbee.

Control

Online guide

Consult guide.niko.eu for more information about the installation, the onboarding, the use and troubleshooting.

Troubleshooting

Problem	Cause	Action

I want to use the connect- ed motor control but I don’t yet have a smart hub or wireless bridge to connect it with| All 230 V connected devices for Niko Home Control can be used in stand-alone mode until they are connected to a smart hub or wireless bridge. In this mode, they only switch their own contacts. The

motor control includes an internal switch-over delay of 0.5 seconds when changing the run direction in stand-alone and in connected mode. This switch- over delay allows the motor capacitor to discharge its energy and protects the motor against current peaks and sudden torque changes

My smart hub or wireless bridge doesn’t work anymore| Consult the manuals of the wireless smart hub (552-

or the wireless bridge (550-00640) at

www.niko.eu

| If the power of the smart hub or wireless bridge switches off, all 230 V connected devices will continue to operate in stand-alone mode. They will only switch or dim their own

contacts. Consult the respective product manuals to resolve

the issue

The power supply is off| Switch on the power supply
The connect- ed motor control can- not be found in the Niko Home app or programming software| The distance between the connected motor control and the smart hub or wireless bridge is too close| Make sure there is a distance of at least 2 meters between the device and the smart hub or wireless bridge
The distance between the connected motor control and the smart hub, wireless bridge or anoth- er connected device is too far| Make sure there is a distance of maximum 10 meters between the device and the smart hub, wireless bridge or a subsequent 230 V connected Zigbee® device. To increase the range, add, for example, an additional smart socket outlet or Zigbee® extender to the network
There is no connection between the Niko Home app or laptop/pc and the smart hub or wireless bridge| Check the connection to the smart hub or wireless bridge. Consult the respective product manuals to resolve the issue
The load does not switch on| The motor is not suitable for this motor control| The two contacts of the connected motor control can handle a motor load of max.

1.5 A

The connected motor control is defective.| Replace the connected motor control
The motor is defective| Replace the motor

LED behaviour

niko-552-723X1-Zigbee-Connected-Motor-Control-FIG-14

Reset

niko-552-723X1-Zigbee-Connected-Motor-Control-FIG-16

Specifications

niko-552-723X1-Zigbee-Connected-Motor-Control-FIG-17

To be installed in accordance with the national regulations

Warnings regarding installation

The installation of products that will permanently be part of the electrical installation and which include dangerous voltages, should be carried out by a qualified installer and in accordance with the applicable regulations. This user manual must be presented to the user. It should be included in the electrical installation file and it should be passed on to any new owners. Additional copies are available on the Niko website or via Niko customer services.