CrosbyIP IPBTO10 Temporary Tackle Eye On HP Profiles User Manual

June 10, 2024
CrosbyIP

CrosbyIP IPBTO10 Temporary Tackle Eye On HP Profiles

Instructions for use

IPBTO10

Temporary tackle eye on HP profiles

© The Crosby Group LLC. Nothing from this original user instructions publication may, in any way whatever, be replicated or published without prior written permission from The Crosby Group LLC.

General

You have chosen a CrosbyIP clamp.

CrosbyIP clamps are the most reliable clamps available. But using reliable tools does not automatically mean that practices are reliable. The people who work with clamps play an equally important role in reliable operation. Ensure that everyone who works with CrosbyIP clamps has been instructed in the proper application of the clamps.

CrosbyIP provides a 10 year warranty for its clamps. To keep CrosbyIP clamps in optimum condition and keep warranty, regular maintenance is important. Preventive maintenance and repair shall be carried by a repairer authorized by CrosbyIP. In order to benefit from this warranty programme and for more details on maintenance procedures, please consult www.thecrosbygroup.com/resources/crosbyip-10-year- guarantee for more information.

Please read and understand these instructions before using the clamp.

Safety precautions

  • Proper instruction for the personnel is of vital importance. This will contribute to maximum reliability in the working environment.
  • IPBTO10 clamps may only be used per piece.
  • Hardness: The IPBTO10 is suitable up to a surface hardness of 363 HV10. For harder steel types contact your CrosbyIP Customer Service Centre.
  • Temperature: the operating temperature is between –40 ºC (–40 ºF) and 100 ºC (212 ºF). For other temperatures contact your CrosbyIP Customer Service Centre.
  • There are restrictions for operation in special atmospheres (e.g. high humidity, explosive, saline, acid, alkaline).
  • Loads: For proper application of the clamp consult the load diagrams 1.
  • Ensure that all attachments are properly fitted, secured and coupled.
  • Each time only one profile may be placed on IPBTO10 clamps.
  • Remark: when handling the load, one should ensure that the load and or clamp does not encounter obstacles which could release the load on the clamps prematurely.
  • A clamp is a device that must be clean when used. Dirt has an adverse effect on the operation and also on the reliability of the clamp. When cleaning the clamp care should be taken to ensuring that moving parts are lubricated and the gripping surfaces are clean. Regular cleaning will enhance the life and reliability of the clamps.

It is not permitted to stay in the danger zone of the load.
No changes may be made to CrosbyIP clamps. Never straighten, attempt to bend or heat treat parts.
Clamps suited for stainless steel, must be used only for handling stainless steel, to avoid contact corrosion.

Inspections protocols

Prior to every application of the clamp it is important the clamp operator inspects the clamp for proper functioning. Attention must be paid to the following (see illustration(s) 2 for part reference):

  • Ensure that the plate surface with which the clamp is to come into contact is free of scale, grease, oil, paint, water, ice, moisture, dirt and coatings that might impede the contact of the gripping surface with the load.
  • Check the body (N) and shackle (S) for damage, cracks or deformation (this may indicate overloading).
  • Check the screw spindle (O) for its function by opening and closing the clamp with the hand grip (X). The spindle should be easily rotatable over its full length. The clamp must open and close properly (when the operation of the clamp is stiff or heavy, it should be removed from operation for inspection).
  • Check whether the W.L.L. and the jaw opening stamped on the body corresponds with the load.

The screw thread of the spindle is the most critical part in the IPBTO clamp and requires extra attention during inspection. In case of damages the clamp will not open and close properly. This will
have a negative effect on your safety precautions when the clamp has not been closed on the profile properly. Moreover to prevent any possible damages is as equal important, as damages on the spindle may indicate rough or careless use of the clamps. In doubtful cases an authorised repairer should assess the clamp.

How to operate the clamp

IPBTO10 clamps are suitable as a temporary tackle eye on HP profiles.

See illustrations 3 – 7 for part reference.

  1. Open the clamp by turning the handgrip (X) counter-clockwise, so that jaws fit comfortably over the profile (3).
  2. Hold the clamp in position over the profile and close the clamp by turning the handgrip (X) clockwise. Ensure that the clamp closes properly and securely (E) (4).
  3. The clamp may now be loaded.
  4. After the load is at its destination the clamp needs to be fully free of load. The shackle (S) must be able to move freely (6).
  5. The clamp can now be removed. Open the clamp by once more turning the handgrip (X) counter-clockwise and remove the clamp from the profile (7).

A reliable clamp, a secure basis for lifting

10 Year warranty preventive maintenance procedure:

Parts should be replaced only when they no longer meet our standards.

10 Year warranty repair procedure:

Parts should be replaced only when they no longer meet our standards.

Please consult www.thecrosbygroup.com/resources/crosbyip-10-year- guarantee for more information on maintenance procedures.

Maintenance without 10 year warranty: Annually clamps are subjected to inspection and parts will be replaced only when they no longer meet our standards.
CrosbyIP authorised repairer

Explanation test certificate

EU Declaration of Conformity: We hereby declare that the equipment described at the front page conforms to the relevant fundamental safety and health requirements of the appropriate EU Directives, both in its basic design and construction as well as in the version marketed by us. This declaration will cease to be valid if any modifications are made to the machine without our express approval.
Relevant EU Directives: EU Machinery Directive (2006/42/CE) Applied standards: EN 13155 and
ASME B30.20

UK Declaration of Conformity: We hereby declare that the equipment described at the front page meets the essential safety requirements of the Supply of Machinery (Safety) Regulations 2008 and section 6 of the Health and Safety At work Etc. Act. 1974. This declaration will cease to be valid if any modifications are made to the machine without our express approval.
Applied standards: EN 13155 and ASME B30.20

Manufacturer/Fabrikant/Hersteller/Fabricant/Produttore/Fabricante/Tillverkare/Valmistaja/Produsent/ Producent/Производитель/Výrobce/Proizvajalca/Κατασκευαστής

CrosbyIP Lifting Clamps – Inter Product BV
Celsiusstraat 51
6716 BZ Ede
The Netherlands

Ede, 25-1-2021 W. Fabricius

Manufacturer:

CrosbyIP Lifting Clamps – Inter Product BV
Celsiusstraat 51
6716 BZ Ede
The Netherlands

WARNING

  • Loads may disengage from clamp if proper procedures are not followed.
  • A falling load may cause serious injury or death.
  • The clamp shall not be loaded in excess of its rated load or handle any load for which it is not designed. Read instructions in user manual to determine minimum load permitted and proper load thickness.
  • Never operate a damaged or malfunctioning clamp, or a clamp with missing parts.
  • Clamp not to be used for personnel hoisting.
  • Prohibition of handling above persons.
  • Do not leave suspended loads unattended.
  • Operator and other personnel shall stay clear of the load.
  • Do not lift loads higher than necessary.
  • Do not make alterations or modifications to clamp.
  • Do not remove or obscure warning labels.
  • See ANSI/ASME B30.20 BELOW-THE-HOOK LIFTING DEVICES for additional information.
  • Read, understand, and follow these instructions and the product safety information in user manual before using clamp.

Customer Service Centres

U.S.A
P.O. Box 3128
Tulsa, OK 74101
P: (+1) (918) 834 46 11
F: (+1) (918) 832 09 40
customerservice@thecrosbygroup.com

UNITED KINGDOM
Station Street
Cradley Heath
West Midlands B64 6AJP
P: (+44) (0)1226 290 516
F: (+44) (0)1226 240 118
salesuk@thecrosbygroup.com

BELGIUM
Industriepark Zone B n°26
2220 Heist-op-den-Berg
P: (+32) (0)15 75 71 25
F: (+32) (0)15 75 37 64
salesbelgium@thecrosbygroup.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals