Proactive 32500 Protekt Dash Standing Transfer Aid Owner’s Manual
- June 10, 2024
- proactive
Table of Contents
Protekt Dash Standing Transfer Aid
Owner’s Manual
32500 Protekt Dash Standing Transfer Aid
MODEL 32500
BEFORE USE:
Ensure the product has been assembled according to the instructions in this
manual.
All operators should have received or read and understood the instructions for
safe and proper operation of the Protekt® Dash.
Supplier Name:
Telephone:
Serial #:
Date of Purchase:
INSPECT YOUR MERCHANDISE
Upon receipt of your Protekt® Dash, verify that all merchandise is complete
and free from any shipping damage. Refuse delivery if the packaging appears to
be badly damaged. If the merchandise is received damaged or is missing
components, contact the shipping company immediately and file a claim.
For further assistance, contact your local dealer or Proactive at the
following:
Proactive Medical Products
270 Washington Street
Mount Vernon, NY 10553
855-237-7622
www.proactivemedical.com
SAFETY INSTRUCTIONS
- FAILURE to use this device according to instructions may cause serious injury.
- NEVER attempt to transfer a patient or resident whose weight exceeds the indicated maximum capacity for this device or any accessory.
- NEVER leave a patient unattended during transfer
- DO NOT use without complete understanding of safe and correct operation
- DO NOT use for the purpose of transportation over long distances.
- DO NOT use for the purpose of seating over long extended periods of time.
DEFINITIONS
Warning! Failure to heed this warning may result in damage to the product
or serious injury to the operator and/or user.
Important instructions follow. Read and understand the instructions in the
manual before using the product.
Note! Important information concerning the product and/or its correct and
proper usage follow.
PRODUCT FEATURES
DESCRIPTION & APPLICATIONS
The Protekt® Dash from Proactive represents a class of medical devices
collectively referred to as a standing transfer aid. The Protekt® Dash
standing transfer aid is positioned between a traditional walker or wheelchair
and the common electric stand assist patient lift. The Protekt Dash is a
transfer assist unit which keeps the user actively engaged in the process.
Transfer functions of all types are quick and require minimal caregiver
assistance. Each unit is equipped with a crossbar where users can grasp and
pull their self up into a standing position using their own strength. The
padded split seats swing out allowing the user to stand up and board the unit.
The caregiver then flips the split seats back into place to form a secure and
comfortable seat for the user to sit on for the remainder of the transfer.
A patient or resident who qualifies to use the Protekt® Dash must have enough
leg and lower body strength to stand up and remain in the standing/sitting
position. Adequate arm strength is required if the patient must use crossbar.
Users who satisfy these criteria and have difficulty walking or present a
potential for falling down will find the Protekt® Dash a useful and safe
transfer device. For patients who lack these requirements, a sit-to-stand lift
such as the electric powered patient lift is preferred and recommended.
The Protekt® Dash is suitable for the following types of transfers:
- Bed to Chair/Wheelchair
- Bed/Chair/Wheelchair to commode
- Room to Room
SPECIFICATIONS & OPTIONS
Protekt® Dash
| Maximum Capacity | 500 Lb / 2 Kg |
|---|---|
| Minimum Base Width | 26.8 |
| Maximum Base Width | 37”* |
| Open Base Width | 37”* |
| Closed Base Width | 26.7” |
| Base opens | Yes |
| Overall Height | 43.3” |
| Base Height | 4.5” |
| Minimum Seat Height | 26.7”** |
| Seat Width | 20” |
| Overall Length | 35.4” |
| Unit Weight | 78 Lbs. |
| Knee Pads / Shin Guards | Yes |
| Optional Support Strap | Yes |
| Optional Seat Locks | Yes |
*Measured to the outside of each base leg with the base legs in the widest open position
**Measured from the ground to the bottom of the seat
ASSEMBLY
Prior to assembly, unpack all parts from the shipping carton and heck for any
missing parts. Contact your dealer immediately if part is missing.
Parts List
- Cross Bar x 2
- Right Side Arm
- Left Side Arm
- Side Support Arm x 2
- Knee Pad Support Bar
- Knee Pad x 2
- Seat x 2
Tools & Fasteners
A1 8x Carriage bolt
A2 2x Hex bolt
A3 4x Hex screw
A4 10x Washer
A5 10x Lock washer
A6 8x Lock nut
A7 2x Plastic cap
T1 1x Wrench
T2 1x Allen key
Factory assembled base with foot plate and castors
STEP BY STEP ASSEMBLY
-
Place the base assembly on the floor and lock casters in place for ease of assembly.
Insert the kneepads into the
support bar and secure them in place with bolts and washers (A2 + A5 + A4) as
indicated below. -
Cover the two bolt heads with black plastic caps (A7) to complete kneepad assembly.
-
Install the kneepad assembly between the two side support arms as shown. Fasten in place with four carriage bolts, nuts and washers.
-
Insert the kneepad side support assembly into the base slots and then insert the seat assembly into the kneepad and side support assembly.
-
Use the remaining 4 carriage bolt assemblies to securely fasten the two sub assemblies to the base unit. All of the square shoulders of the bolts should be on the inside and the washers and lock nuts on the outside. (A1 + A4 +A5 +A6)
OPERATING INSTRUCTIONS
Double check all assemblies for tightness and read operating instructions
carefully prior to use.
SEAT USAGE INSTRUCTIONS
The two black molded seat units can be rotated upwards to allow for patient
loading. Once the patient is in an upward standing position the split seats
must be lowered down to form a complete two-sided seat. Always make sure each
of the two seat components are properly lowered forming a complete seat prior
to having the patient sit down.
STEP 1
Raise the two split seat units up and parallel to the side of the Protekt®
Dash as shown below.
STEP 2
Have the patient positioned at the edge of the surface and move the
standing transfer aid in front of the patient so that their feet are firmly on
the platform and knees/shins are in contact with the two cupped knee/shin
pads as shown below. The Protekt® Dash allows access around wider obstacles
such as recliners. The base opens by stepping on the foot pedal .
** STEP 3
Lock the casters by stepping on the caster clip and pushing down as shown
below.
**
STEP 4
Have the patient grasp the cross bar closest to them and using their own
strength pull themselves up into a standing position firmly on the platform as
shown.
STEP 5
Lower both of the split seat units down into position to form a complete seat
as shown.
STEP 6
Have the patient lower themselves down onto the seat while keeping their
knees/shins in the knee/shin pads and while still holding the cross bar with
both hands as shown.
STEP 7
Unlock the casters and place both hands on the cross bar furthest from the
patient and move the standing transfer aid to the new surface. Make sure the
patient is secure and in proper position as described in Step 6 above prior
and during transfer as shown below.
MAINTENANCE & INSPECTION
- The Protekt® Dash standing transfer is a manual unit and therefore requires minimal maintenance on an ongoing basis. However, to insure safety and proper use, the following steps should be taken on a monthly basis
- Check all bolt/nut assemblies to make sure they are tight and no wear and tear is evident. Replace and tighten any worn assemblies prior to using the Protekt® Dash.
- Check the two seat assemblies to make sure they are not worn or damaged and that the bolts are tight. Replace any worn or damaged seat components before using the Protekt® Dash.
- Check the casters to make sure they are in working order and are secured firmly to the Protekt° Dash. Replace any worn or damaged casters prior to using the Protekt® Dash.
ACCESSORIES
The Protek® Dash standing transfer is designed to fully support a seated
patient for transport. For patients requiring some upper body support or
additional security a safety belt may be used. The 30669B Support Strap is
designed to work with the Protekt® Dash.
See the pictures below for the use of this support strap:
WARRANTY AND RETURN GOODS POLICY
The Protekt® Dash you purchased is guaranteed to be free from defects in
material and workmanship under normal use and service. The warranty period for
this product is 3 Years on Frame from the date of purchase by the original
purchaser. This warranty shall be voided upon transfer of ownership of this
product. Proactive agrees to repair or replace this product at our discretion
and at no charge, within the warranty period provided and that Proactive
consents the unit is defective. The repaired or replacement unit shall be
warranted for a period equal to the balance of the defective unit’s warranty
period.
NOTE:
To ensure the best service to our customers, Proactive requires the following
information to be Included with the retimed unit:
- Model Name/Number and Serial Number (or Lot #) on the packaging.
- Proof of purchase, i.e. a copy of the original invoice.
- A Return Authorization number (RA#) obtained by calling an authorized dealer/distributor prior to the fretum of the product. The RA% must be clearly indicated on the outside of the packaging.
- A detailed description of the problem and its symptoms on a note.
This warranty shall not apply to any product which has been repaired or
altered in any way so as. in our judgment. to affect its functionality and
durability, nor to any product subject to abuse. misuse, negligence or
accident, improper maintenance, improper installation, nor to any product used
with other parts, components and/or accessories with quality and/or
specifications not compatible with this product. This warranty does not cover
products that have been impaired by occurrences considered Acts of God over
which authorized dealer has no control. This warranty shall also be voided if
any required periodic maintenance, if applicable, has not been properly
performed on this product.
This warranty and the aforementioned remedies presented are exclusive and in
lieu of all other express or implied warranties. No other representations or
claims shall be binding or obligate authorized dealer in any way. Any warranty
applicable to this product is limited to the aforementioned period indicated.
In no event shall authorized dealer be liable for any special. incidental, or
consequential damages: loss of revenue: or cost of replacement goods;
resulting from the use or malfunction of this product to the associated
equipment on which and with which it is used. This warranty gives specific
legal rights and you may be entitled to other rights that vary from state to
state.
270 Washington Street, Mount Vernon, NY 10553
Tel: 855-237-7622
www.proactivemedical.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>