SHENZHEN SAGAMOBILE CO LTD SW30 Portable Projector User Manual

SAGAMOBILE CO LTD SW30 Portable Projector

User Manual

Important Safety Matters

Installation
To achieve the best effect, please use the projector in a darker room or draw the curtains.
Be careful when use the projector. Any dropping or bump may lead to damaged parts, blurred images or display improperly.
Power Source
Be careful to the power cord to avoid excessive bending. Damaged power cord may cause electric shock and fire.
Please be careful when using this machine. Falling or striking may damage components, blur images or display abnormally.
Cleaning
Unplug the power first.
Clean the cabinet regularly with a damp cloth. Neutral detergent can be used. Do not use strong detergents or solvents (such as alcohol and thinner).
The lens should be cleaned with glasses cloth or lens paper. Be careful not to scratch the lens.
Please regularly use a soft brush to clean the air inlet filter screen, vent and loudspeaker of the machine, otherwise the vent will be blocked by dust accumulation, causing  overheating of the machine, which will lead to machine failure.
High Temperature Attention
Do not disassemble the projector casually since there may be a risk of electric shock, which affects normal maintenance.
Liquid or heavy objects should not allowed on the machine.

Know Your Projector

Projector Accessories Description
The projector can input HDMI high-definition video signals, and supports stereo audio signal input and output. Connect the projector and other equipment according to the following picture.

1. Projection lens.
2. Remote control signal receiving window.
3. Headset or speaker interface.
4. HDMI interface.
5. USB interface.
6. Dust screen at air inlet.
7. Power socket.
8. Heat dissipation air outlet.

1. Power button.
2. Hanger fixing hole.
3. Bottom label.
4. Foot mats.

BT adapter connection

BT remote control pairing method:

1. Long press the BT connection button on the remote control for 3 seconds, BT pairing is automatically performed, and the system enters the BT pairing page.
2. The red indicator on the remote control flashes during pairing.
3. After the pairing is successful, the system pops up the BT pairing success prompt menu.

1. Indicator light.
2. Power button.
3. Signal source button.
4. Direction button.
5. Menu button.
6. BT connectivity
7. Volume +.
8. Volume -.
9. Mute button.
10. Home button.
11. Confirm button.
12. Back button.
13. Lens Forward.
14. Lens backward.

Standard Setting
Refer to the data below and place the projector at the appropriate distance from the screen according to required size of the screen . Please place the projector on a smooth  and solid table top, or suspend it from the ceiling. The area around the projector should be well ventilated to avoid blocking the vents. There should be no other objects  within 30cm around the vents.

Note: The above data is for reference only, please refer to the actual measurement data.
These figures may vary due to differences in optics. Suggestion: Please physically adapt the distance and screen size before installation.

Attention
To avoid distortion of the projected image after projection, place the projection as close to the axis of symmetry as possible.

| |
---|---|---
The projector is right handed, the left side is bigger and the right side is smaller.| The installation position and angle are  correct, the image is square.| The projector is left sided, the left is small  and the right is large.

Installation methods

Depending on the environment and requirements, this projector can be suspended from the ceiling using a professional projection stand, or placed on a smooth tabletop. Or  choose another mounting option according to the following illustrations.

Attention Matters

1. When using the hanging method, the projector should not be higher than the top edge of the screen, or it will affect the screen imaging effect and keystone correction.
2. The projector should be installed on the left and right axis of symmetry of the screen to avoid left and right keystone distortion of the image.
3. The space around the projector should be well ventilated after installation and there should not be any objects blocking the way of the vents.
4. Please do not connect the power source during installation to avoid electric shock or projector circuit failure.
5. Projector just installed may be blurred and trapezoidal distorted, please refer to the section on graphic calibration for correction.

Projector On/Off

Switch on/off operation
Power on: press the power on button for 1 second or the power button on the remote control, and the power indicator changes from red to green to enter the working state.
Shutdown: The following 2 modes can be selected.

1. In the working state, press the power button on the machine body, and a power off prompt menu will pop up on the screen. Select the OK button, and the power  indicator light will change from green to red. The projector lens will be zoomed in and turned off.
2. In working mode, press the power button on the remote control, and then press the confirm button. The power indicator light changes from green to red, and the  projector lens zooms to the innermost position before shutting down.

Image correction

Focusing dial
The projection will automatically focus. Or use the lens on the remote control to press the button inwardly or outwardly while viewing the particle dots on the image. When  parked at the clearest position, this position is the best focus position.

Instructions for Interface operation

1. How to choose the signal source
   After entering the main interface, press the signal source button ” ” on the power button, select the required signal source channel in the pop-up interface, such as  “HDMI1, Multi-Media”, etc., and press the OK button on the remote control to enter the corresponding signal source status.

2. How to connect WiFi
   Enter the main interface, System Settings, Network Settings – WiFi Settings; find the network you want to connect to and press Confirm.
   Enter the password via the virtual keyboard and confirm the connection.

3. How to play U disk
   Insert a USB disk stored with multimedia files into the USB port and select Movie, Music, Photo, Office suite in the main interface.

4. How to set up electronic keystone correction?
   Main interface, system settings, projection settings, trapezoidal correction, switching four-point mode, manual trapezoidal correction; (The escalator type is enabled by  default, and electronic ladder correction can only be used after the escalator type switch is turned off.)
   Adjust the four corners through the direction keys until the normal screen is displayed.

5. How to use BT
   Select Settings and click on “BT Settings”; Then search for BT devices and find the one you need to pair with.

6. How to use Android Screen Projection

7. Miracast Device side : Main interface to Miracast

8. mobile side, find the screen projection function in the settings, and connect the device name to Android Screen Together

9. How to use the Apple projector

10. Connect your phone and projector to the same WiFi, if you don’t have WiFi, set up a hotspot with your iPhone and connect to it with your projector.

11. Device side: enter iOS Cast in the main interface

12. Mobile side: open the Apple mirroring function and connect the device to the same screen

13. How to use BT speakers
    Projection end: the main interface accesses the BT speaker.
    Mobile terminal: open the BT connection function of the mobile phone to connect the projection BT.![SHENZHEN SAGAMOBILE CO LTD SW30 Portable Projector

• BT speakers](https://manuals.plus/wp-content/uploads/2023/04/SHENZHEN- SAGAMOBILE-CO-LTD-SW30-Portable-Projector-BT-speakers.png)

  9. How to use auto focus
     Open the system settings, select the projection settings, find the auto focus button, and click Enable. You can either move or shake the device to trigger the auto focus function. The system is enabled by default.

  10. How to use the escalator type
      Open the system settings, select the projection settings, find the escalator type button, and click Enable. You can either move or shake the device to trigger the automatic  ladder function. The system is enabled by default (this function is enabled by default, and there is no function for single opening, which needs to be enabled together with auto focus).

  11. How to use automatic obstacle avoidance
      Open System Settings, select Projection Settings, find the Automatic Obstacle Avoidance button, and click Enable. After that, you can move or shake the device to  trigger the obstacle avoidance function. When there are obstacles on the projected wall, you can trigger the obstacle avoidance function (the obstacle avoidance function  range is limited, and the obstacles cannot be within the checkerboard grid).

  12. How to use automatic entry
      Open System Settings, select Projection Settings, find the Automatic Screen Entry button, and click Enable. After that, you can move or shake the device to trigger the  screen entry function. When the projected screen exceeds the screen, the screen will be cut to the appropriate screen size.

Multimedia play formats

Due to Dolby patent copyright issues, this machine does not support Dolby related audio decoding.

Simple Troubleshooting

The operation of this machine is very simple, just like an ordinary TV set, usually you won’t encounter any problems, but there may be some false faults due to the adjacent  equipment or voltage, please handle the problem on your own before sending it for repair, if it still does not work properly after troubleshooting, please contact the relevant staff.

if the power supply plugged into
Pressing the power button on the remote control and still can’t switch on| 1. Make sure if the switch at the back of the projector turned on
2. Make sure if the remote control battery powered off
3. Make sure if the projector receiving port illuminated by direct light
No image on the screen when the projector is turned on| 1. Make sure if the signal selection channel of the projector correct
2. Make sure if the signal source channel turned on
3. Make sure if signal cable plugged in properly
The machine turns off automatically after a  short time working| 1. Make sure if the air inlet and outlet of the projector blocked
2. Make sure if the voltage too low, or voltage fluctuations too high

According to Directive 2014/53/EU, the Bands and power are as follows:
BT: 8.55 dBm EIRP ;BLE: 7.76 dBm EIRP ; 2.4 GHz Wi-Fi: 16.77 dBm EIRP ; 5 GHz Wi-Fi: 9.41 dBm EIRP.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this  device must accept any interference received, including interference that may cause undesired operation.
IMPORTANT NOTE:
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to  provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to  radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to  try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.

www.sar-tick.com| According to EN IEC 62311, be used to evaluate the environmental impact of human exposure to radio- frequency (RF) radiation as specified table 2 of Council Recommendation 1999/519/EC.
The RF Exposure is compliant.
---|---
| To prevent possible hearing damage , do not listen to sound at high volume for long periods.
****| This marking on the product, accessories or literature indicates that the product and its electronic accessories should not be disposed of with other household waste.

Documents / Resources

| SHENZHEN SAGAMOBILE CO LTD SW30 Portable Projector [pdf] User Manual
SW30 Portable Projector, SW30, Portable Projector, Projector
---|---

References

• MWF - SAR Tick

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>