SHARP 32EA2K 32 Inch HD Ready TV User Guide

: June 10, 2024
: Sharp

Table of Contents

32EA2K 32 Inch HD Ready TV
REMOTE CONTROL
What is included in the box
Setting up the TV set for the first time
Wall Mounting the TV
Connectivity
Technical Specification
Documents / Resources

32EA2K 32 Inch HD Ready TV
User Guide

32EA2K 32 Inch HD Ready TV

For information on using the TV’s features, please refer to the operating Instructions.
Model Numbers
32EA2K / 32EA4K / 32EA6K / 32EA7K
Register your manufacturers guarantee online within 14 days of purchase at www.registertoday.co.uk/sharp and enter into a prize draw to
Win a SHARP Soundbar
Terms and conditions apply. Online registration only. Quick & easy guide for setting up your TV
What is included in the box
Using the remote control
Setting up the TV for the ﬁ rst time – including attaching the stand
Connecting other devices to the Television
Need help setting up or using your TV?
Please contact the UK & ROI Helpline
Telephone UK 0330 024 0803 or ROI 01443 3323
Online support at: www.umc-uk.co.uk
Email support at: service@umc-uk.co.uk
Calls to 0330 numbers are charged at standard call rates and are included as part of any bundled minutes with your phone provider. Hours are correct at time of this document being published.
Please note these hours are subject to change periodically.
Calls to the ROI number are charged at the local call rate.
The telephone opening hours are:
Monday to Friday: 8.30am – 6pm
Saturday: 9am – 5pm
Bank Holidays: 10am – 4pm
Closed Christmas and New Years day.

REMOTE CONTROL

1| STANDBY – Switch on TV when in standby or vice versa
MUTE – Mute the sound or vice versa
DTV – Switch to Freeview source
RADIO – Switch to radio whilst in Freeview source
USB – Switch to USB source
DVD – Switch to DVD source
---|---
2| NUMBER BUTTONS – 0-9 to select a TV channel directly.
TV GUIDE – Opens the 7 day TV Guide (Freeview mode)
– To return to the previous channel viewed
3| VOL (+/-) – to increase / decrease the sound level
P.MODE – Scrolls through picture mode options
S.MODE – Scrolls through sound mode options
FAV – To display favourite menu
CH (+/-) – To increase or decrease the channel being watched
MENU – To display OSD menu
EXIT – To exit all menus
(▲/▼/◄/▼/OK ) – Allows you to navigate the on-screen menus and adjust the system setting to your preference
SOURCE – To display the input/source menu
INFO: Press once for now/next channel information.
Press twice for programme information about current programme
4| ASPECT – to switch the screen between the different picture formats
SLEEP – Press repeatedly to cycle through the sleep options
AUDIO – to change the audio language (if available)
SUBTITLE – To switch the dialogue at the bottom of the screen (on/off)
TEXT – To enter/exit Text
TEXT HOLD – Teletext mode – Hold current page which is displayed (analogue TV)
DISPLAY – To switch off the screen when listening to radio
TEXT/DVD ZOOM – Zoom function for teletext and DVD
DVD MENU/RECORD – Access the DVD root menu and USB record function

– To restart the current chapter
– To advance forward to the next chapter
– To stop the playback/Eject Disc
To EJECT the disc press/hold the button for 4 seconds)
– To play in fast rewind mode
– To play in fast forward mode
** – To play/pause
DVD SETUP/REC LIST – Opens the DVD Menu or opens the list of what has been previously recorded
GOTO – To go to a speciﬁ c chapter
A-B – Press once to set a start point, press a second time to set a loop
ANGLE – Select different angles/content on the DVD (if available)
REPEAT** – To repeat playback

Sky Remote Code
If you wish to use your Sky remote to operate the TV’s basic functions, you will need a Sky remote control (Revision 9 or later) and you will need to program it with the code 2134. If you wish to use your Sky Q remote to operate the TV’s basic functions, you will need to program it with the code 4170.

What is included in the box

Accessories
Included with this TV are the following accessories

1 x Safety Leaﬂ et
1 x Quick start guide
1 x Remote Control and 2 x AAA Batteries
1 x Stand installation pack

Additional Accessories
If you don’t have the RF cable shown below, then you can purchase one from www.umc-uk.co.uk/cables
If you are intending to connect your TV to an RF socket in order to receive Freeview, you will need this cable.
RF Cable Please save your box/packaging as you will need this in the event of warranty/service repair or support. We are unable to carry out warranty/service if you are unable to package it correctly. The safest way to package your item in the event of warranty/service repair is in it’s original box/packaging.

Setting up the TV set for the first time

Fitting the stand
For the stand installation, there is one type of screw provided as shown below.
To complete the stand installation you will require a cross head screw driver.
Place the TV set on a ﬂ at and clean surface with the panel facing downwards to avoid damage.
Used for attaching the stand to the TV set (ﬁg.2)
TV panel must be facing downwards.
1. Place the TV set on a ﬂ at and clean surface with the panel facing downwards to avoid damage.
2. When the stand feet are installed correctly the stand feet will be longest at the front of the TV and shortest at the back with the feet pointing away from each other.
3. When the stand/feet are in the correct position, secure the feet to the underside of the TV set using 4 screws provided.
Connecting your set
1. Connect the TV to your power socket.
2. If you wish to use the TV to receive Freeview/Saorview channels, connect the RF input from the TV to your outdoor Digital TV aerial.
If you do not wish to receive Freeview/Saorview, skip this step.
Powering On the TV
TV Control Stick
Switch on the television by pressing the TV control stick located on the TV set.
Remote Control:
Installing Batteries
Insert the batteries supplied into the remote control and press the standby button to power on the TV.
First time installation
When you ﬁ rst turn on the set, you will be welcomed by the First Time Installation screen as shown.
Once you have decided the options as described below, select Auto Tuning and press OK on the remote control.
Language: Select your preferred on-screen display language. This will change the language in which the menus and associated information is displayed in.
Country: Select the country which the TV is to be used in.
Environment: Use this option to select either Home or Store mode.
Home Mode: Power saving mode which reduces the energy used (by reducing the power to the LED/LCD panel).
Store Mode: The picture will be brighter and you can personalise the settings within the picture settings menu (Contrast, Brightness, Colour etc.
Note: In Home Mode, the TV will switch itself to the standby mode after 4 hours in the event that the buttons on the remote control or TV are not used.
Auto-Tuning: Starts the tuning process with the selected parameters.
Sorting by LCN: Automatically sorts the channel listing in logical order where main channels on 1, 2, 3, 4, 5 etc will be BBC 1, BBC 2, ITV, Channel 4, Channel 5 etc.
The next screen allows you to choose the tuning mode of the TV.
For normal broadcast TV such as Freeview, the Tuning Mode should be DTV (Digital TV)
Press OK on the remote to begin the tuning process.
The TV will show you a progress indicator displaying which channels have been found.

Win a SHARP Soundbar
Register your manufacturers guarantee online within 14 days of purchase at www.registertoday.co.uk/sharp and enter into a prize draw to win a Sharp Soundbar Terms and conditions apply. Online registration only.

Wall Mounting the TV

Image for illustration only. For the dimensions of the VESA mounting, please refer to the Technical Speciﬁ cations section of this document.

Remove the four screws that are supplied in the wall mounting holes.
The wall mount can now be easily attached to the mounting holes on the rear of the TV.
Install the wall mounting bracket to the television as advised by the bracket manufacturer.

The picture shows the use of spacers, which are not applicable to all sets/installations.

Connectivity

SHARP 32EA2K 32 Inch HD Ready TV - Connectivity

A	Digital Audio	Digital Optical Audio Output	H	RF in	RF / TV aerial input
B	HDMI 1	HDMI input	I	HDMI 3	HDMI input
C	HDMI 2	HDMI input (ARC)	J	Earphones	Earphone input
D	L/R	Audio shared for Video/Composite and component/ YPbPr	K	Service
Input	Input is used only by service centres
E	Video/YPbPr	Video Input (green) and HD input (Ypbpr)	L	CI card in

Technical Specification

32EA2K / 32EA4K / 32EA6K / 32EA7K

Energy Efﬁ ciency Class (SDR)	E
Power consumption (SDR)	1366 x 768
Screen resolution (pixels)	75 ohm Antenna / Analog / DVB / Satellite
Screen Size (diagonal)	25 W
RF	81 cm / 32 inches
Inputs	3 x HDMI • 2 x USB • 1 x Scart • 1 x Composite/CVBS Video &

Component/YPbPr Input • 1 x L/R Audio input for Composite/CVBS & Component/YPbPr
Sound Outputs| 1 x Digital Optical Audio output • 1 x 3.5mm Headphone
Speaker*/ Ampliﬁ er Watts (RMS)| 2 x 10 / 2 x 8
Voltage and power consumption| AC 220V ~ 240V; 50Hz
25/40/65W (home mode/standard/max)
(<0.5W in Standby)
Dimensions including stand (mm)| 730W x 470H x 179D
Net weight (Kgs)| 4.6
Wall Mounting| VESA 200 x 100 (mm)

*Built-in Harman Kardon speaker systems (Full-range speaker and tweeter).

| |
---|---|---
Harman Kardon is trademark of HARMAN International Industries, Incorporated, registered in
the United States and/or other countries.| The terms HDMI, HDMI HighDeﬁ nition Multimedia Interface, HDMI trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.| Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby
Laboratories Licensing Corporation.

SHA/QSW/0259