FUJIFILM XF16-80mmF4 R OIS WR Fujinon Lens Owner’s Manual

XF16-80mmF4 R OIS WR Fujinon Lens
Owner’s Manual FUJINON LENS
XF16-80mmF4 R OIS WR
OWNER’S MANUAL

For Your Safety

Be sure to read these notes before use
Safety Notes

Thank you for your purchase of this product. For repair, inspection, and internal testing, contact your Fujifi lm dealer.

• Make sure that you use the lens correctly. Read these safety notes and the camera Owner’s Manual carefully before use.
• After reading these safety notes, store them in a safe place.

About the Icons
The icons shown below are used in this document to indicate the severity of the injury or damage that can result if the information indicated by the icon is ignored and the product is used incorrectly as a result.
WARNING
This icon indicates that death or serious injury can result if the information is ignored.
CAUTION
This icon indicates that personal injury or material damage can result if the information is ignored.
The icons shown below are used to indicate the nature of the instructions which are to be observed.
Triangular icons tell you that this information requires attention (“Im- portant”).
Circular icons with a diagonal bar tell you that the action indicated is prohibited (“Prohibited”).
Filled circles with an exclamation mark indicate an action that must be performed (“Required”).
WARNING

Do not use in the bathroom or shower| Do not immerse in or expose to water. Failure to observe this
precaution can cause a fire or electric shock.
---|---
Do not disassemble| Do not disassemble (do not open the case). Failure to observe
this precaution can cause fire, electric shock, or injury due to
product malfunction.
Do not touch internal parts| Should the case break open as the result of a fall or other ac-
cident, do not touch the exposed parts. Failure to observe this
precaution could result in electric shock or in injury from touching the damaged parts.
Remove the camera battery immediately, taking care to avoid injury or electric shock, and take the product to the point of purchase for consultation.
| Do not place on unstable surfaces. The product may fall,
causing injury.
| Do not view the sun through the lens or camera viewfi nders.
Failure to observe this precau tion can cause permanent
visual impairment.

CAUTION

****| Do not use or store in locations that are exposed to steam, or smoke or are very humid or extremely dusty. Failure to observe this precaution can cause fire or electric shock.
---|---
| Do not leave in direct sunlight or in locations subject to very high temperatures, such as in a closed vehicle on a sunny day. Failure to observe this precaution can cause fire.
| Keep out of the reach of small children. This product could cause injury in the hands of a child.
| Do not handle with wet hands. Failure to observe this precaution can cause electric shock.
| Keep the sun out of the frame when shooting backlit subjects.
Sunlight focused into the camera when the sun is in or close to the frame can cause fire or burns.
| When the product is not in use, replace the lens caps and store out of direct sunlight. Sunlight focused by the lens can cause fire or burns.
| Do not carry the camera or lens while they are attached to a tripod. The product can fall or strike other objects, causing injury.

For Customers in the U. S. A.
Tested To Comply With FCC Standards
FOR HOME OR OFFICE USE
FCC Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the follow- ing two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
CAUTION: T his equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be de- termined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit diff erent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• You are cautioned that any changes or modifications not expressly approved in this manual could void the user’s authority to operate the equipment.

Notes on the Grant: To comply with Part 15 of the FCC Rules, this product must be used with a Fujifi lm-specifi ed ferrite-core A/V cable, USB cable, and DC supply cord.
For Customers in Canada
CAN ICES-3 (B)/NMB-3(B)
CAUTION: This Class B digital apparatus complies with Canadian ICES-003.

IMPORTANT SAFETY INSTRUCTIONS

• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water (excluding waterproof products).
• Clean only with a dry cloth.
• Do not block any ventilation openings. Install in  accordance with the manufacturer’s instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
• Only use attachments/accessories specifi ed by the manufacturer.
• Unplug this apparatus during lightning storms or when unused for long periods of time.
• Refer all servicing to qualifi ed service personal.

Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Disposal of Electrical and Electronic Equipment in Households
In the European Union, Norway, Iceland and Liechtenstein: This symbol on the product, or in the manual and in the warranty, and/or on its packaging indicates that this product shall not be treated as household waste.
Instead it should be taken to an applicable collection point for the recycling of electrical and electronic equipment.
By ensuring this product is disposed of correctly, you will help prevent potential negative consequences to the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.
The recycling of materials will help to conserve natural resources. For more detailed information about recycling this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
In Countries Outside the European Union, Norway, Iceland and Liechtenstein:
If you wish to discard this product, including the batteries or accumulators, please contact your local authorities and ask for the correct way of disposal.
U.K. Importer:
FUJIFILM UK Limited
Fujifi lm House, Whitbread Way, Bedford,
Bedfordshire, MK42 0ZE, United Kingdom
EU Importer:
FUJIFILM Electronic Imaging Europe GmbH
Fujistrasse 1 47533 Kleve, Germany
Australian RCM

Before Using This Product

The lens may not perform as expected and some features may not be available with older versions of the camera firmware. Be sure to update the camera firmware to the latest version.
Instructions on viewing the camera firmware version and updating camera firmware are available from the following website: http://www.fujifilm.com/support/digital_cameras/software/#firmware
If you do not have access to a computer, support is available from the local distributor listed in the “FUJIFILM Worldwide Network” material provided with your camera.

Product Care

• When using a lens hood, do not pick up or hold the camera using only the hood.
• Keep the lens signal contacts clean.
• Use a blower to remove dust and lint from the glass surfaces of the lens or fi lter. To remove smudges and fingerprints, apply a small amount of lens cleaner to a soft, clean cotton cloth or lens-cleaning tissue and clean from the center outwards using a circular motion, taking care not to leave smears or touch the glass with your fi ngers.
• Never use organic solvents such as paint thinner or benzene to clean the lens.
• Attach the front and rear caps when the lens is not in use.
• Store the lens and fi lter in cool, dry locations to prevent mold and rust. Do not store in direct sunlight or with naphtha or camphor moth balls.
• Keep the lens dry. Rusting can cause irreparable damage. Wipe off rain and water droplets.
• Leaving the lens in extremely hot locations could cause damage or warping.

Parts of the Lens

XF16-80mmF4 R OIS WR

1. Lens hood
2. Mounting marks
3. Focus ring
4. Zoom ring
5. Aperture ring
6. Mounting marks (focal length)
7. Lens signal contacts
8. Front lens cap
9. Rear lens cap

The lens mount includes a rubber ring to ensure that the lens remains dust- and splash-proof. The ring can be replaced for a fee at any Fujifi lm service center.

Attaching the Lens

See the camera manual for information on attaching and removing lenses.
This product is for use exclusively with the FUJIFILM X mount.
It is not compatible with the G mount or with X mount film cameras.

Removing the Caps

Remove the caps as shown.

Attaching the Hood

When attached, lens hoods reduce glare and protect the front lens element.

Supplied Accessories

• Front lens cap
• Rear lens cap
• Lens hood
• Lens wrapping cloth

Zoom
Rotate the zoom ring left to zoom out, reducing magnifi cation and increasing the area visible in the frame. Rotate the ring right to zoom in, increasing magnification so that the subject occupies more of the frame. Using the zoom ring while the lens is wet makes it easier for water to fi nd its way inside the lens. Wipe any water from the lens before using the zoom ring.

Optical Image Stabilization (OIS)

Optical image stabilization is available using the IS MODE option in the camera shooting menu.
We recommend that you enable optical image stabilization even when using a tripod.

The Aperture Ring

At settings other than A, you can adjust aperture by rotating the lens aperture ring (exposure modes A and M).

Specifications

aspherical extra-low-dispersion element)
Focal length (35 mm format equivalent)| 1=16-80 mm (24-122 mm)
Angle of view| 83.2°-20.1°
Max. aperture| f/4
Min. aperture| f/22
Aperture control Number of blades Stop size| 9 (rounded diaphragm opening) 1/3 EV (16 stops)
Focus range| 35 cm — infinity
Max. magnification| T :0.25 x
External dimensions: Diameter x Length (approx.) distance from front of lens to lens mount flange| W: Ø78.3 x 88.9 mm
T :Ø78.3 x 131.5 mm
Weight* (approx.)

• excluding caps and hoods| 440g
  Filter size| Ø72 mm

Improvements may result in unannounced changes to specifications and appearance.
Owing to how this lens is constructed, the “Distance indicator” displayed by the camera may in some cases differ from the actual focus distance. Use the “Distance indicator” as a guide only.

7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO
107-0052, JAPAN

References

• サポート情報 | 富士フイルム Xシリーズ & GFX
• Support | FUJIFILM X Series & GFX – Global
• DOWNLOAD | FUJIFILM X Series & GFX – Global

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>