nVent RAYCHEM JBM-100-L-EP Multiple Entry Power Connection with Junction Box Instructions
- June 10, 2024
- nVent RAYCHEM
Table of Contents
JBM-100-E/JBM-100-EP
JBM-100-L-E/JBM-100-L-EP
Multiple Entry Power Connection with Junction Box
Instructions
JBM-100-L-EP Multiple Entry Power Connection with Junction Box
Multiple entry power connection with junction box
| 
---|---
JBM-100-E
JBM-100-EP
JBM-100-L-E
JBM-100-L-EP
PTB 20 ATEX 1008 U
BAS 21 UKEX 0657 U| II 2 G Ex eb mb IIC Gb
II 2 D Ex tb mb IIIC Db
---|---
IECEx PTB 20.0014U
| JBM-100-E(P):
ТС RU C-BE.МЮ62.В.00054/18
Ex e IIC Gb U Ex tb IIIC Db U
Ex e mb IIC Gb U Ex tb mb IIIC Db U
Ta –55°C…+56°C IP66
ООО “ТехИмпорт”
JBM-100-L-E(P):
ТС RU C-BE.МЮ62.В.00054/18
Ex e IIC Gb U Ex tb IIIC Db U
Ex e mb IIC Gb U Ex tb mb IIIC Db U
Ta –55°C…+40°C IP66
ООО “ТехИмпорт”
| Non lighted versions (1):
Ex e IIC Gb
Ex tD A21 IP66| Lighted versions (2):
Ex e mb IIC Gb
Ex tD mbD 21 IP66
| Ex eb IIC T Gb
Ex eb mb IIC T Gb
BAS 21 UKEX 0657 U| Ex eb mb IIC Gb
Ex tb mb IIIC Db
| Non lighted versions (1):
CL I ZN 1 AEx eb IIC T Gb
ZN 21 AEx tb IIIC T°C Db
Ex eb IIC T Gb
Ex tb IIIC T°C Db| Lighted versions (2):
CL I ZN 1 AEx eb mb
IIC T Gb
ZN 21 AEx mb tb IIIC
T°C Db
Ex eb mb IIC T Gb
Ex mb tb IIIC T°C Db
-
For system Temperature Code, see heating cable or design documentation.
** Specific conditions for use may apply for ATEX/UKEX and IECEx.- Non lighted versions:
- Lighted versions:
WARNING: To prevent electrical shock, short circuit or arc ing, this prod
uct must be in stalled correctly and water ingress must be avoid ed before and
during the installation.
WARNING: The purchaser should make the manufacturer aware of any external
effects or aggressive substances that the equipment may be exposed to.
Before installing this product, read the installation instructions completely.
CAUTION: Prolonged or repeated contact with the sealant in the core
sealer may cause skin irritation. Wash hands thoroughly. Overheating or
burning the sealant will produce fumes that may cause polymer fume fever.
Avoid contamination of cigarettes or tobacco. Consult MSDSVEN 0058 for further
information.
| Rated voltage | nVent RAYCHEM JBM-100-E(P): 480 Vac** JBM-100-L-E(P): 254 Vac |
|---|---|
| Ambient temperature | JBM-100-E(P): –55°C to +56°C** |
JBM-100-L-E(P): –40°C to +40°C, except for VPL: in that case ambient
temperature can be up to +56°C.
Ingress protection| IP66
Maximum pipe temperature:
Heater type| T max continuous| T max intermittent 1000 h
cumulative| Tmax power off
---|---|---|---
BTV| 65°C| 85°C| –
QTVR| 110°C| 110°C| –
XTV| 121°C| 250°C| –
KTV| 150°C| 250°C| –
HTV| 205°C| 260°C| –
VPL| See tables below| –| 260°C
VPL: maximum pipe temperature in dependence of heat type and voltage
| Heater Type | 230 Vac | 254 Vac | 277 Vac |
|---|---|---|---|
| 5VPL2-CT | 230°C | 225°C | 225°C |
| 10VPL2-CT | 210°C | 200°C | 195°C |
| 15VPL2-CT | 180°C | 145°C | 105°C |
| 20VPL2-CT | 150°C | Not allowed | |
| Heater Type | 385 Vac | 400 Vac | 480 Vac |
| --- | --- | --- | --- |
| 5VPL4-CT | 230°C | 230°C | 230°C |
| 10VPL4-C | 215°C | 215°C | 205°C |
| 15VPL4-C | 195°C | 195°C | 160°C |
| 20VPL4-C | 150°C | 150°C | 150°C |
VPL: Maximum pipe temperature in dependence
| ≤ 150°C | ≤ 180°C | ≤ 230°C |
|---|---|---|
| 30 A | 25 A | 20 A |
| 30 A | 25 A | 20 A |
| 30 A | 25 A | – |
| 30 A | – | – |
| ≤ 150°C | ≤ 180°C | ≤ 230°C |
| --- | --- | --- |
| 30 A | 25 A | 20 A |
| 30 A | 25 A | 20 A |
| 30 A | 25 A | – |
| 30 A | – | – |
Specific conditions for use using ATEX/UKEX or IECEx approvals:
For ambient temperatures >+40°C:
Use a power cable with continuous temperature resistance of minimum +90°C
Use a metallic power cable gland approved for use in hazardous areas (for
example GL-38-M25-METAL).
For voltages >254 Vac and BTV, QTVR, XTV, KTV or HTV heating cables:
Use a power cable with continuous temperature resistance of minimum +90°C
Use a metallic power cable gland approved for use in hazardous areas (for
example GL-38-M25-METAL).
For pipe temperature > 150°C and XTV, KTV or HTV heating cables, the maximum
operating current shall be reduced to maximum 20A.
| 
---|---
| 
| 
| 
| 
| 
Remove the tubes and dispose of them in the core sealer plastic bag.
| 
---|---
Install power cable and gland. Pull in power and ground wires, strip off 13 mm of insulation and terminate. (For -EP version only: connect earth plate to ground according to local requirements).
Install lid.
τ = 1.02 to 1.47Nm
Apply insulation and cladding.
Weather seal the stand entry.
Leave these instructions with the end user for future reference.
North America
Tel +1.800.545.6258
Fax +1.800.527.5703
thermal.info@nVent.com| België/Belgique
Tel +32 16 21 35 02
Fax +32 16 21 36 04
salesbelux@nVent.com| Bulgaria
Tel +359 5686 6886
Fax +359 5686 6886
salesee@nVent.com
---|---|---
Česká Republika
Tel +420 606 069 618
czechinfo@nVent.com| Danmark
Tel +45 70 11 04 00
Fax salesdk@nvent.com
salesdk@nVent.com| Deutschland
Tel 0800 1818205
Fax 0800 1818204
salesde@nVent.com
España
Tel +34 911 59 30 60
Fax +34 900 98 32 64
ntm-sales-es@nVent.com| France
Tél 0800 906045
Fax 0800 906003
salesfr@nVent.com| Hrvatska
Tel +385 1 605 01 88
Fax +385 1 605 01 88
salesee@nVent.com
Italia
Tel +39 02 577 61 51
Fax +39 02 577 61 55/28
salesit@nVent.com| Lietuva/Latvija/Eesti
Tel +370 5 2136633
Fax +370 5 2330084
info.baltic@nVent.com| Magyarország
Tel +36 1 253 7617
Fax +36 1 253 7618
saleshu@nVent.com
Nederland
Tel 0800 0224978
Fax 0800 0224993
salesnl@nVent.com| Norge
Tel +47 66 81 79 90
salesno@nVent.com| Österreich
Tel +0800 29 74 10
Fax +0800 29 74 09
salesat@nVent.com
Polska
Tel +48 22 331 29 50
Fax +48 22 331 29 51
salespl@nVent.com| Republic of Kazakhstan
Tel +7 7122 32 09 68
Fax +7 7122 32 55 54
saleskz@nVent.com| Россия
Тел +7 495 926 18 85
Факс +7 495 926 18 86
salesru@nVent.com
Serbia and Montenegro
Tel +381 230 401 770
Fax +381 230 401 770
salesee@nVent.com| Schweiz/Suisse
Tel +41 (41) 766 30 80
Fax +41 (41) 766 30 81
infoBaar@nVent.com| Suomi
Puh 0800 11 67 99
salesfi@nVent.com
Sverige
Tel +46 31 335 58 00
salesse@nVent.com| Türkiye
Tel +90 560 977 6467
Fax +32 16 21 36 04
salesee@nVent.com| United Kingdom
Tel 0800 969 013
Fax 0800 968 624
salesthermaluk@nVent.com
nVent.com/RAYCHEM
©2022 nVent. All nVent marks and logos are owned or licensed by nVent Services
GmbH or its affiliates.
All other trademarks are the property of their respective owners. nVent
reserves the right to change specifications without notice.
RAYCHEM-IM-INSTALL038-JBM100X-ML-2210
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>