BYTECH BY-OP-CP-508-BK Fortable Dual Wireless Charging Stand User Manual

BYTECH BY-OP-CP-508-BK Fortable Dual Wireless Charging Stand

FOLDABLE DUAL WIRELESS CHARGER & APPLE WATCH® STAND

INPUT: SV3A
OUTPUT: SV 2A TOTAL

Included Items

• 1 Wireless Charger
• 1 20 inch (50 cm) USB Type-C Charging Cable
• 1 Manual

Getting Started

1. Connect your wireless charger stand to a DC power adapter. Use the charging cable (included) to connect the Type-C to the corresponding port on the stand, and the USB part to the power adapter (not included) USB port.
2. When the power is turned on, the blue light and red light will flash once respectively, and red light is solid to show that the Wireless charger is ready.
3. Place the charger on a level surface.

Phone Pad Charging

1. Place your phone on the charger with the display facing forward. For best performance, center it on the charge pad.
2. Your phone should start charging a few seconds after you place it on the wireless charging pad. You should see in the phone battery status icon and the pad indicator light will hold blue. It still hold blue when your phone battery has been fully charged.

Airpods Pad Charging

1. Place your Airpods (in case) on the center of the charge pad.
2. You Airpods should start charging a few seconds after you place it on the wireless charging pad. You should see the pad indicator light will hold blue. It still hold blue when your Airpods battery has been fully charged.

Apple watch charging

1. Insert the USB tip of your Apple watch magnetic charging cable(not included) through the holster support ring and plug into the USB port at the back of the wireless charger stand.
2. Fit the main charging body of the magnetic charging cable into the support ring so that the cable is facing down and fit into the groove.
3. Place your apple watch on the charge surface to charge.

LED light status:

1. When the power is turned on, the blue light and red light will flash once respectively, and red light is solid to show that the Wireless charger is ready.
2. When charging your device, the indicator will glow blue.
3. When fully charged, the indicator light remains solid blue.

BE SURE TD FOLLOW ALL SAFETY WARNINGS BELOW

1. We strongly recommend using an adapter with an output no less than 2A.
   Insufficient input may cause unstable charging.

2. It’s normal for your device to get slightly warm during the inductive charging. It has an overheating protection function built in.

3. Compatible with most kinds of phone covers cases, including rubber cases, hybrid cases, plastic/TPU/PC cases also. Not recommended to use the charger with metal covers or metal accessories.

4. Keep away from direct sunlight, fire, water or humidity and high voltage equipment. Do not store the item inside a car during hot weather.

5. Make sure thatthe plate doesn’t get too hot. If it does, take your phone away from the plate and switch the charger off. When the plate has cooled down try charging again.

6. Do not try to open, crush, puncture or deform.

7. Keep out of reach of children.

8. Do not place the charger closely to the magnetic stripes or chip cards (ID cards, bank cards) to avoid magnetic failure.

Specifications

• Input: 5V/3A

• Wireless charger. SV/1 A

• Wireless charger output : Phone SW+ Airpod SW

• USB output : 1 A

• Charging distance: ,; 6mm

• Charging efficiency: ,; 65%

• Size: 2002072mm

• Compatible with most smartphones with Qi Wireless Charging capability, such as: Apple iPhone 8 series/X-Series/11 series/12 Series/1 3 Series/SE; Samsung Galaxy 56 -521 Series /Note 8 & Later/Galaxy Fold/Galaxy Flip; LG G2-G7 Series/ThinQ Series; Google Pixel 3-6 Series & more.

FCC Rules

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radiofTV technician for help.

Caution : Any changes or modifications not expressly approved could void the user’s authority to operate the equipment.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator & your body.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

WARRANTY-12 MONTH

Please visit our website Bytechintl.com/warranty
Bytech NY INC. warrants this product to be free from defects in materials and workmanship to the original purchaser for a period of 12 months from the original purchase date. Bytech’s responsibility with regard to this limited warranty shall be limited solely to repair or replacement as its option, of any product which fails during normal consumer use. This warranty does not extend to damage or failure which results from misuse, neglect, accident, alteration, abuse, improper installation or maintenance. At any time during the 12 month period following the purchase, the product fails due to defects in material or workmanship, return the defective product (with freight prepaid) with proof of purchase. Please include $5.00 for return shipping and handling.

WWW.BYTECHINTL.COM
Bytech NY Inc.
2585 West 13 street
Brooklyn NY 11223
(71 B) 449-3700
©2022 BYTECH NY INC.
BYTECH”‘ is o registered trademark of Bytech NY INC.
Airpods”‘ and Airpods Pro”‘ is o registered trademark of Apple Inc.
Apple Watch is o registered trademark of Apple Inc.
iPhone3 is a registered trademark of Apple, Inc.
Galaxy S® is o registered trademark of Samsung Electronics Co, Ltd.
Pixel  is a registered trademark of Google, Inc.
ThinQ  is a registered trademark of LG, Inc.
Bytech hos no affiliation with Apple, Inc., Samsung Electronics Co, Ltd., Google, Inc., Huowei Technologies Co., Ltd., or LG, Inc.
*All Trademarks and copyrights are the property of the respective companies.

FCC ID: 2AHN6-0PCP508
Made in Vietnam

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>