soundmaster PL895 Elite Line Wooden Retro Vinyl Records Player Instruction Manual

PL895

ENVIRONMENTAL PROTECTION

Do not dispose of this product with the normal household waste at the end of its life cycle. Return it to a collection point for the recycling of electrical and electronic devices.
This is indicated by the symbol on the product, user manual or packaging
The materials are recyclable according to their labeling. By reusing materials or other forms of recycling old devices and packaging, you are making an important contribution to protecting our environment. If necessary, remove batteries and personal data before disposal free of charge and ask your local authority about the responsible disposal point.
WARNING
Risk of electric shock Do not open!
Caution: To reduce the risk of electric shock, do not remove the cover (or back). There are no user serviceable parts inside. Refer servicing to qualified service personnel.
This symbol indicates the presence of dangerous voltage inside the enclosure, sufficient enough to cause electric shock.
This symbol indicates the presence of important operating and maintenance instructions for the device
* Used batteries are hazardous waste and NOT to be disposed of with the household waste! As a consumer you are legally obligated to return all batteries for environmentally responsible recycling – no matter whether or not the batteries contain harmful substances)
Return batteries free of charge to public collection points in your community or shops selling batteries of the respective kind.
Only return fully discharged batteries
*) marked Cd = cadmium, Hg = mercury, Pb = lead**

• Only use mercury and cadmium-free batteries.

• Used batteries are hazardous waste and NOT to be disposed of with the household waste!!!

• Keep batteries away from children. Children might swallow batteries.

• Contact a physician immediately if a battery was swallowed.

• Check your batteries regularly to avoid battery leakage.

• Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

• CAUTION: Danger of explosion if battery is incorrectly replaced

• Replace only with the same or equivalent type
  CAUTION – INVISIBLE LASER RADIATION WHEN OPENING THE COVER OR PRESSING THE SAFETY INTERLOCK. AVOID EXPOSURE TO THE LASER BEAM.
  To prevent possible hearing damage, do not listen at high volume levels for long periods

• Use the device in dry indoor environments only.

• Protect the device from humidity.

• This apparatus is for moderate climates areas use, not suitable for use in tropical climates countries.Safety, Environmental and Setup Instructions

• No objects filled with liquids, such as vases, shall be placed on the apparatus.

• The mains plug or an appliance coupler is used as the disconnect device, the disconnect devices shall remain readily operable.

• Connect this device to a properly installed and earthed wall outlet only. Make sure the mains voltage corresponds with the specifications on the rating plate.

• Make sure the mains cable stays dry during operation. Do not pinch or damage the mains cable in any way.

• A damaged mains cable or plug must immediately be replaced by an authorized service center.

• In case of lightning, immediately disconnect the device from the mains supply.

• Children should be supervised by parents when using the device.

• Clean the device with a dry cloth only.

• Do NOT use CLEANING AGENTS or ABRASIVE CLOTHS!

• Do not expose the device to direct sunlight or other heat sources.

• Install the device at a location with sufficient ventilation in order to prevent heat accumulation.

• Do not cover the ventilation openings!

• Install the device at a safe and vibration-free location.

• Install the device as far away as possible from computers and microwave units; otherwise radio reception may be disturbed.

• Do not open or repair the enclosure. It is not safe to do so and will void your warranty. Repairs only by authorized service/ customer center.

• No naked flame sources, such as lighted candles, should be placed on the unit.

• When you are necessary to ship the unit store it in its original package. Save the package for this purpose.

• In case of malfunction due to electrostatic discharge or fast transient (burst), remove and reconnect the power supply.

• If the unit is not using for a long period of time, disconnect it from the power supply by unplugging the power plug. This is to avoid the risk of fire.

LOCATIONS OF CONTROLS

FRONT VIEW

1. Dustcover
2. Turntable
3. Speaker
4. VOLUME knob
5. Left VU meter
6. STANDBY/MODE button
7. PLAY-MODE button
8. RECORD button
9. OPEN/CLOSE button
10. CD door
11. Headphone Socket
12. USB socket
13. AUX-IN Socket
14. Right VU meter
15. STOP/PRESET button
16. PLAY/MENU button
17. DN/F-R/SCAN button
18. UP/F-F/INFO button
19. LCD display
20. Remote Sensor
21. SELECT/ENTER knob
    BACK VIEW![soundmaster PL895 Elite Line Wooden Retro Vinyl Records Player

• FRONT VIEW 1](https://manuals.plus/wp-content/uploads/2023/04/soundmaster- PL895-Elite-Line-Wooden-Retro-Vinyl-Records-Player-FRONT-VIEW-1.png)

  22. Antenna Socket
  23. Speaker Terminal
  24. Left Line Out Socket
  25. Right Line Out Socket
  26. AC Power Cord

REMOTE CONTROL

27. Open Close
28. RECORD
29. DN – Track backwards
30. VOL – Volume
31. TUNER/MENU – Tuning/Menu down
32. P.MODE – Repeat
33. SCAN
34. INFO Information
35. Power On/Off
36. UP – Track forwards
37. – Play/Pause Enter button
38. STOP
39. VOL + Volume +
40. MODE Function
41. EQ Sound settings
42. MENU
43. TUNER/MENU + Tuning/Menu up
44. FOLDER
45. PRESET
46. DELETE
47. PROGRAM
48. MUTE
    NOTE: All of the buttons on the remote control have same function as these buttons at the unit.

TURNTABLE

49. Single 45 RPM Adaptor
50. Turntable Platter
51. Transit Screw
52. Counter Weight
53. Pitch Control
54. Cue Lever
55. Speed Selector (33&45 rpm)
56. Tone Arm Lock
57. Tone Arm with Stylus

CONTENT OF DELIVERY

• Main unit
• Turntable platter
• Dust cover
• Instruction manual
• Speaker
• Slip mat
• DAB / FM Antenna

GETTING STARTED

POWER SOURCE
This system is designed to operate on normal 230V 50Hz AC only.
Attempting to operate from any other power source may cause damage to the system, and such damage is not covered by your warranty.
NOTE: If this plug will not fit into your outlet, you probably have an outdated non-polarized AC outlet. You should have your outlet changed by a qualified licensed electrician. Connect the speaker cable to the speaker terminal located on the rear side of the unit. Put the red cable into the red terminal and the black cable in the black terminal of the speaker position (left and right).

BATTERY INSTALLATION OF REMOTE CONTROL
The battery compartment is located on the back of the remote control.

1. Remove the battery compartment door by pressing in on the tab and lifting it off.
2. Insert two (2) AAA size batteries (not included) into the battery compartment following the polarity markings inside the battery compartment.
3. Replace the battery compartment door.

BASIC OPERATIONS

Power ON / OFF
Press “STANDBY/MODE” button at the unit or “ ” button on the remote control to enter the working mode.
Press and hold “STANDBY/MODE” button or “ ” button on the remote control to turn off the unit in standby mode.
Selecting Modes
Press the “STANDBY/MODE” button on the unit or the “MODE” button on the remote repeatedly to switch between modes.
Adjusting Volume
Rotate the “VOL” knob on the unit or press “VOL -/+” buttons on the remote to decrease /increase the volume.
Total 39 level volume and it displays Vol min – Vol max.
ERP power management
If nobody presses and holds the POWER button to turn OFF the unit after stopping playing, the unit will power off automatically after around 10 minutes. Press “STANDBY/ MODE” button on the unit or the “ ” button on the remote to wake the device up from standby mode.

DAB OPERATION

1. Connect the FM / DAB antenna at the back of the unit.
2. Turn the system ‘on’ and press the “MODE” button to enter into DAB mode. The unit will scan the DAB station automatically till receive the DAB station.
3. Press the “TUNER MENU -” or “TUNER MENU +“ button or rotate the “SELECT/ENTER” knob to choose the DAB stations manually.
4. During DAB playing mode, press “INFO” button to see the information of the playing DAB station on the screen, i.e. Program Type, Ensemble Information,  ransponder, Audio BitRate, Signal-Strength, Time/Date, DLS Information.

DAB FULL SCAN

1. During DAB mode, press the “PLAY/PAUSE/MODE” button to enter the DAB menu.
2. Press the “TUNER MENU -” or “TUNER MENU +“ button or rotate the “SELECT/ENTER” knob to choose “Station scan”
3. Press the “TUNER MENU -” or “TUNER MENU +“ button or rotate the “SELECT/ENTER” knob to choose “Full scan”
   •  The unit scans for all available stations.

DAB Manual tune

1. During DAB mode, press the “PLAY/PAUSE/MODE” button to enter the DAB menu.
2. Press the “TUNER MENU -” or “TUNER MENU +“ button or rotate the “SELECT/ENTER” knob to choose “Station scan”
3. Press the “TUNER MENU -” or “TUNER MENU +“ button or rotate the “SELECT/ENTER” knob to choose “Manual tune”
   •  You can choose your desired frequency by rotate the “SELECT/ENTER” knob and press it to confirm.

MEMORY FUNCTION IN DAB/FM MODE

1. In DAB/FM playing mode, choose the desired radio station. Press the “PRESET” button to get into the preset station list. Choose with the “SELECT/ENTER” knob or the “TUNER MENU -” or “TUNER MENU +“ button your desired preset station.
2. Press and hold “ENTER” button for 2 seconds to confirm and ‘Preset x Stored’ will show on the display. (x = selected preset station)
3. Repeat the above 1 – 2 steps to program 20 desired DAB stations or 20 FM stations.
4. Press the “PRESET” button to get into the preset station list. Choose with the “SELECT/ENTER” knob or the “TUNER MENU -” or “TUNER MENU +“ button your desired preset station and press “SELECT/ENTER” to confirm.

FM OPERATION

1. Turn on the system and press the “MODE” button to enter into FM mode.
2. Press the “SCAN” button to start auto-search the FM stations. Or press and hold the “TUNER MENU+ / TUNER MENU-“ buttons to tune the desired radio station. Press “TUNER MENU+” or “”TUNER MENU-“ or rotate the “SELECT/ENTER” knob to tune the radio station manually in 50kHz steps.
3. If you tune to a FM stereo station, the ‘stereo’ will show on the display. If you tune to a weaker FM station, the reception will automatically switch to mono. You may press “SELECT” or “ENTER” to change Stereo or Mono mode
4. During FM working mode, press “INFO” button to see the following information on the screen: Stereo/mono, Radio Text, Program Type, Signal Strength, Time/Date and Frequency.

CD – MP3 / USB OPERATION
This unit works with USB in FAT32 format and with a memory capacity of max. 16 GB
COMPACT DISC CARE
To remove a disc from its storage case, press down on the centre of the case and lift the disc out, holding it carefully by the edges.
Fingerprints and dust should be carefully wiped off the discs recorded surface with a soft cloth. Unlike conventional records, compact discs have no grooves to collect dust and microscopic debris, so gently wiping with a soft cloth should remove most particles. Wipe in a straight line from the inside to the outside of the disc. Small dust particles and light stains will have absolutely no effect on reproduction quality.
Note: CD or USB mode have the same operating procedures.

Playing CD or USB

1. Turn on the system and press the “MODE” button to enter into CD or USB mode.

2. CD: Press the “OP/CL” button to open the CD door. Place a CD with the printed side facing up inside the tray, then close the CD door. The first track will start playback.
   USB: Insert carefully USB drive in the USB socket. The first track will start playback.

3. Press “PLAY/PAUSE” button to pause the playback. The track time will start blinking. Press “PLAY/PAUSE” button again to resume the playback.

4. Press “STOP” to stop the playback.

TRACK SKIP AND HIGH SPEED TRACK SEARCH IN CD / USB MODE

1. During CD/USB playback, press “UP/F-F” (Fast Forward) or “DN/F.R” (Fast Reverse) button repeatedly will skip to higher or lower tracks. The disc will begin to play from your selected track.
2. To rapidly search forward or backward within a track and locate a specific passage of it, press and hold “UP/F.F” or “DN/F.R” button. The player will search forward or backward at a high speed. Release the button when you hear your desired passage and the playback will resume normal from that point.
3. To select next folder (Album) press the “FOLDER” button on the remote control.

REPEAT/RANDOM Function
Press the “PLAY-MODE” button on the unit or the “P.MODE” button on the remote control to choose the Repeat-Mode:
ONE: plays the current playing track
ALL: plays the current playing folder (only by MP3-CD or USB)
RAN: Tracks played in random order

MEMORY FUNCTION IN CD/MP3 MODE

1. In stop mode, press the “PROGRAM” button on the remote control to enter PROGRAM mode, ‘DISC’ ‘MEM’ P00’ ‘T01’ will show on the screen.

2. Press the “UP/F.F.” button or “DN/F.R” button to select your desired track and then press the “PROGRAM” button to confirm.

3. Repeat the step 1 and step 2 to continue to program.
   Note: You can save a total of 99 MP3 tracks and 99 CD tracks. ‘PROGFULL’ will show on the screen once over 99 MP3 tracks or 99 CD tracks.

4. Press the PLAY/PAUSE button to play the saved tracks, press “UP/F.F” or “DN/F.R” to select a track in the sequence saved.

5. Press the “STOP” button twice to leave program mode. The entire program stored in memory is canceled.

BLUETOOTH® FUNCTION

This unit only has a receive function and cannot connect to Bluetooth® Headphones or similar devices.

1. Turn on the unit and press “MODE” button to select the Bluetooth® mode.
2. Select from your portable device (Smartphone, Tablet…) the ID Bluetooth® tagged as ‘PL895’, then confirm connection.
3. Now you can transfer the music to PL895 and all operations can only be operated from your mobile device.

TURNTABLE OPERATION

IMPROTANT
TO AVOID DAMAGING THE CABINET OR THE PHONO LID, NEVER FORCE THE LID CLOSED. ALWAYS RAISE THE LID TO RELEASE
THE LID SUPPORT BRACKET.
DOOR SUPPORT BRACKET, PULL FORWARD TO RELEASE AND LOWER DOOR.
To protect the turntable from damage during transportation, a transit screw is located at the upper right of the turntable platform.
Before playing, please use a screwdriver to turn the transit screw in clockwise direction (screw going down) completely.
To lock the turntable again for transportation, please turn the screw in counter clockwise direction to lock the mechanism.

Speed alignment using the Pitch adjustment
The turntable speed is preset. By turning the control in the “+” and “-” directions, you can set the speed and thereby influence the sound result according to your ear and personal taste.

Tone arm stopping position alignment
– The position of the tone arm complete
playback and return to the rest station can be adjusted at the alignment screw as follow:-
Before starting the alignment, please take out the hole covering rubber:
a. If the system cannot complete the playback of record and return earlier, use a cross head screw driver and turning the alignment screw inside the hole clockwise, the stopping and eject position of the tone arm will move more inward to the center of the record for playback completion.
b. If the system cannot return to rest position automatically after playback of record use a cross head screw driver and turning the alignment screw inside the hole anti-clockwise, the stopping and eject position of the tone arm will move more away from the center of the record for playback completion.
Remark:
– The stopping position is very subjective among difference customers, please select the most suitable position based on your own record collection. The ex- factory setting is based on the most common template.
– Please check the stopping position time by time during adjustment and avoid over turning of the screw inside

ADJUST THE WEIGHT OF THE STYLUS

1. Slide in the counter weight completely into the rear of the tone arm until it reach the end, turn it clockwise until it click with pit inside.
2.  Twist the counter weight clockwise & backward until it reach the white line as figure 2
3. Twist the counter marking without the counter weight until it reach “ 3 “ position
4. Twist the counter weight anti-clockwise & inward until it reach the appropriate working pressure.

Remark :
pressure stylus is from the range 3 – 4 grams. According to the cartridge manufacturer.it own working pressure and please refer to the specification respectively.
The working of the provided All stylus has

PLAYING RECORDS
This system includes a full-size, 2-speed, belt-drive turntable. You can play 33 and 45 rpm records.

1. Press the “MODE” button to enter the “PHONO” mode.
2. Make sure that you have removed the stylus cover from the stylus and have released the tone arm lock that secured the tone arm to the tone arm rest.
3.  Set the turntable speed selector to the appropriate speed 33 or 45rpm. If you are playing 45 rpm ‘singles’, place the 45 rpm adapter on the centre spindle.
4.  Place your record on the centre spindle.
5. Raise the cue lever to lift the tone arm off its rest. Move the tone arm to the edge of the record. The turntable starts automatically. Use the cue lever to gently lower the tone arm onto the record.
6. Press the “VOL-/+” button to the desired level.
7. When the tone arm reaches the end of the record it automatically returns to the tone arm rest and the record player stops.
   NOTE: Do not turn or stop the turntable manually. Moving or jarring the turntable without securing the tone arm clamp could result in damage to the tone arm.

USB RECORDING

1. CD RECORDING
   Recording one track:
   1. Plug USB drive into USB socket.
   2. During the playing mode the desired track, press the “RECORD” button one time.
   Recording complete disc:
   1. Plug USB drive into USB socket
   2. Set the disc in Stop-mode.
   3. Press the “RECORD” button.
   4. The track name of the file and “REC” will show on the display. The unit starts recording.
   To stop the recording, press the “STOP” button.

2. PHONO RECORDING
   1. Plug USB drive into USB socket
   2. During the PHONO playing mode, press the “RECORD” button one time, The track name
   of the file and “REC” will show on the display. The unit starts recording. To stop the
   recording, press the “STOP” button.

3. BLUETOOTH® RECORDING
   1. Plug USB drive into USB socket
   2. During the BLUETOOTH® playing mode, press the “RECORD” button one time, The track name of the file and “REC” will show on the display. The unit starts recording. To stop the recording, press the “STOP” button.

4. AUX IN RECORDING
   1. Plug USB drive into USB socket
   2. During the AUX-IN playing mode, press the “RECORD” button one time, The track name of the file and “REC” will show on the display. The unit starts recording. To stop the recording, press the “STOP” button.
   2. DAB/FM RECORDING
   1. Plug USB drive into USB socket
   2. During the DAB+ or FM playing mode, press the “RECORD” button one time, The track name of the file and “REC” will show on the display. The unit starts recording. To stop the recording, press the “STOP” button.
   NOTE: BT 320 kbps| DAB  320 kbps| Phono 320 kbps
   ---|---|---
   CD 320kbps| FM    320 kbps| AUX    320 kbps

5. DELETE USB TRACK
   Delete one Track:
   1. During the USB stop mode, press the “DELETE” button on the remote control one time, ‘1’ will show on the display.
   2. Choose the desired track with the “DN” or “UP” buttons on the remote control.
   3. Press the “DELETE” button again to confirm the selection. The track will be erased.

AUX IN OPERATION

Press “MODE” button to select the AUX mode. Insert the audio cable (not included) into the matching ‘AUX IN’ socket of the unit (PL895).
Start the playback of the connected device and you can hear the sound in PL895.

MUTE / EQ OPERATION
During playing mode, press “MUTE” button on the remote control one time, the sound will not be heard from the speakers and ‘MUTE’ will show on the display; press “MUTE” button or “VOL +/-“ button to cancel mute function and the sound can be heard again from the speakers. During playing mode, press “EQ” button to choose the different sound effect from “POP/ CLASSIC /ROCK/ JAZZ / FLAT”, you can choose the desired one.

PHONES OPERATION
During usual operation insert the earphone’s cable (not included) into the matching ‘PHONES’ socket of the unit. Now you can hear the sound exported to your earphones.
Note: Adjust the volume lever lower during the PHONES operation.
To prevent possible hearing damage, do not listen at high volume levels for long periods.

SETTINGS

LANGUAGE SETTING
During FM or DAB playing mode, press “MENU” button and then press “UP” or “DN“ to choose ‘SYSTEM’ , press “ENTER” button to confirm.
Press “UP” or “DN“ to choose ‘Language’ and press “ENTER” to confirm enter into “LANGUAGE” setting. You can choose from “EN, FR, DE, IT, ES, SK, DK, PL, NO, FI”.

TIME

1. Long press the “PLAY/MENU” button to choose System by rotate the “SELECT/ENTER” button,“Main menu”will be shown on the screen.
2. Press the “SELECT/ENTER” button,“Time setup”will be shown on the screen.
3.  Press the “SELECT/ENTER” button again,“Set clock”will be shown on the screen.
4. Press the “SELECT/ENTER” button again,“Set clock 00:00”(hour:minute) will be shown on the screen.
5. Rotate the “SELECT/ENTER” button and press the “SELECT/ENTER” button to set and confirm the time.
6. Rotate the “SELECT/ENTER” button again,“Set date”will be shown on the screen.
7. Press the “SELECT/ENTER” button to enter setting date mode, “01-01-2022” will be shown on the screen.
8. Rotate the “SELECT/ENTER” button and press the “SELECT/ENTER” button to set and confirm the date.
9. Rotate the “SELECT/ENTER” button and press the “SELECT/ENTER” button to set and confirm the date.
10. Rotate the “SELECT/ENTER” button again,“Auto update”will be shown on the screen.
11. Press the “SELECT/ENTER” button to enter the setting mode.“From radio”or“No update”will be shown on the screen by rotating the “SELECT/ENTER” button. You may choose the desired update mode by pressing the “SELECT/ENTER” button to confirm.
12. Rotate the “SELECT/ENTER” button once again, “Set 12/24 hour”will be shown on the screen.
13. press the “SELECT/ENTER” button to enter the setting mode.“Set 12 hour”or “Set 24hour”will be shown on the screen by rotating the “SELECT/ENTER” button. You may choose the desired mode by pressing the “SELECT/ENTER” button to confirm.

ALARM
2 different alarms can be set.

1. Long press “PLAY/MENU” button to choose System by rotate the “SELECT/ENTER” knob. Press it to confirm.

2. Choose “Alarms” and press the “SELECT/ENTER” knob to confirm.

3.  Choose between ALARM 1 and ALARM 2 and press the “SELECT/ENTER” knob to enter the ALARM settings.

4. You can scroll through the different settings of the Alarm. If you want to change an Alarm setting, choose the point you want to change and press the “SELECT/ENTER” knob.

5.  You have following options:
   • On/Off
   • Time
   • Days:
   Daily, Once, Weekdays, Weekend
   • Mode: DAB, FM, Buzzer
   • Volume
   • Save

6. Once you finished the Alarm settings, choose “save” and press the “SELECT/ENTER” button to save the settings.
   Your alarm is now activated/deactivated.

SLEEP

1. Long press “PLAY/MENU” button to choose System by rotate the “SELECT/ENTER” knob. Press it to confirm.
2. Choose “Sleep” and press the “SELECT/ENTER” knob to confirm.
3. You can set a sleep timer between 15 and 90 minutes. When the chosen sleep time is over, the unit automatically turns into standby mode.
4. Press “SELECT/ENTER” to confirm.

ANNOUNCEMENT

1. Long press “PLAY/MENU” button to choose System by rotate the “SELECT/ENTER” knob. Press it to confirm.
2. Choose “Announcement” and press the “SELECT/ENTER” knob to confirm.
3. Choose between “On” and “Off” and confirm your selection by pressing “SELECT/ENTER”

BACKLIGHT

1. Long press “PLAY/MENU” button to choose System by rotate the “SELECT/ENTER” knob. Press it to confirm.
2. Choose “Backlight” and press the “SELECT/ENTER” knob to confirm.
3. Choose between “Timeout” and “On level”
   • Timeout:
   Choose time between 10 and 180 Seconds. Confirm with “SELECT/ENTER”
   • On level:
   Choose between On, Medium, Low. Confirm with “SELECT/ENTER”

SW VERSION

1. Long press “PLAY/MENU” button to choose System by rotate the “SELECT/ENTER” knob. Press it to confirm.
2. Choose “SW-Version” and press the “SELECT/ENTER” knob to confirm.

The currently installed software version is displayed.

FACTORY RESET

In STANDBY or DAB mode.

1. Press the “PLAY/MENU” button to choose System “Main menu” will be shown on the screen.
2. Rotate the “SELECT/ENTER” button to the factory reset.
3. Press the “SELECT/ENTER” button to enter setting resume mode. “Factory reset?” and “ Yes ” will be shown on the screen.
4. Rotate the “SELECT/ENTER” button to choose No or .
5. Press the “SELECT/ENTER” button to confirm.

LINE OUT
You can connect the unit to an external amplifier or record player (such as a tape recorder) via the line out jack. To do this, connect the device to a conventional RCA cable that you can get from a specialist dealer.

TECHNICAL SPECIFICATIONS

: FM 87.5 – 108.00MHz
Preset Stations| : 20 FM, 20 DAB+
Turntable Speed| : 33 / 45 RPM
Audio power output| : 2x 12,5W RMS

IMPORTER

Wörlein GmbH Gewerbestrasse 12D 90556 CadolzburgGermany| Tel.: +49 9103 71 67 0
Fax.: +49 9103 71 67 12
Email: service@soundmaster.de
Web: www.soundmaster.de
---|---

The current instruction manual can be downloaded from www.soundmaster.de
Technical changes and misprints reserved.
Copyright by Woerlein GmbH, 90556 Cadolzburg, www.soundmaster.de
Duplication only with permission of Woerlein GmbH

References

• soundmaster®
• soundmaster®
• soundmaster®

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>