euker I13 Magnetic Wireless Fast Charging Power Bank User Manual
- June 12, 2024
- euker
Table of Contents
Power Bank PB1
Magnetic Wireless Fast Charging Power Bank
User Manual
Model : I13
Thank you for choosing Euker’s portable, wireless, fast charging power bank! We are confident in our product’s reliability and quality. Please carefully read through this manual before attempting to use the product and keep it handy for further reference.
Product Description
Package Contents
Specifications
USB-C Input: 5V 3A, 9V 2A
USB-C Output: 5V 3A, 9V 2.22A, 12V 1.5A
Wireless Output. 15W / 10W / 7.5W / 5W
Battery Type. Lithium Polymer
Battery Capacity: 10000mAh / 3.85V / 38.5Wh
Rated Capacity: 5800mAh (5V 2.4A)
Size: 4.53×2.86×0.77in / 115×72.6×19.5mm
Weight: 7.76oz / 220g
Operating Instructions
-
Charging the power bank
Connect the USB-C connector of the supplied cable to the power supply device.
The two possibilities for the power supply device are: an AC charger as seen in picture (1), or a computer USB-C port as seen in picture (2). The other end of the supplied charging cable should be plugged into the USB-C port of the power bank.
-
Power on
Auto positioning: Powered on. The mobile and the power bank are magnetically adsorbed and automatically positioned, then wireless charging is turned on with a snap. Short-press: Power on(the light displays), then wireless charging starts. -
Power off
• Double-click the power button to shut down the device.
• Discharge mode: A mode whereby the device starts to decrease the amount of power it is releasing. The device kicks into this mode when it is either not charging a phone, or else the phone is fully charged. The user is given 60 seconds to turn off the discharge state before the power bank completely enters hibernation mode.
• Low current mode: Mode used to increase efficiency and performance of power supply. Lower current mode output lasts for about 2 hours (can exit manually) providing a lower amount of discharge suitable for charging low-power accessories. After the two hours are complete the power bank will enter 60 seconds of discharge mode before settling into hibernation. -
Low-current mode
• Enter/exit low current mode: To enter/exit low-current mode hold down the power button for 5 seconds.
• Low current mode indicator: To show that it has entered the low current mode the power display screen will show a turning circle for 5 seconds.
• Low current mode function: The low current mode is suitable for charging Bluetooth headsets and other small current using devices. -
Description of power display
• Charging digital tube indicator: The single-digit power display screen will flash when the digital tube is charging.
• Discharging digital tube indicator: If power is greater than 5%, the digital tube will remain on. The digital tube will start flashing if there is a power shortage (less than 5%). If the digital tube reaches 0% power, it will flash “0%” 5 times before shutting down.
• This wireless charger is not compatible with non-MagSafe phone cases, such as Otterbox Defender cases.
• Wireless chargers make charging more convenient than wired chargers, but confined by current wireless technology. their charging speed is slower than that of wired chargers.
• Do not use an adapter with an output of 5V/1A(5W) or less.
• High temperatures will reduce charging speed and restrict power, which is something that happens to all wireless chargers. It is recommended that you charge your device in environments with temperatures be between 0°C to 25°C/32°F to 77°F.
• Both the protective phone case and the position of your device on the wireless charger will affect the charging speed. The farther it is placed from the center of the wireless charger, the slower the charging speed will be.
Important Safety Instructions
When using this product, basic precautions should always be followed, including the following:
- Store the product in a cool, dry place.
- Do not store the product in a hot or humid environment.
- Do not dispose of the product in heat or fire.
- Do not clean the product with harmful chemicals or detergents.
- Operating temperature should be between 0°C to 45°C/32°F to 113°F.
- Do not disassemble the product. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or injury to persons.
- If the product is not used for long periods of time, you should charge and discharge it once every three months.
- When charging a device, the product may feel warm. This is a normal operating condition and should not be a cause for concern.
- In normal conditions, the battery performance will decline over several years.
- Misuse, dropping, or excessive force may cause product damage.
- When disposing of secondary cells or batteries, keep cells or batteries of different electrochemical systems separate from each other.
- Be aware that a discharged battery may cause fire or smoke. Tape the terminals to insulate them.
FAQ :
Q: Can this be used with any phone other than an iPhone?
A: This magnetic power bank is designed specifically to charge the iPhone
12/13 series phones. Only iPhone 12/13 series phones support magnetic
charging. Nevertheless, you can only use the U513-C port to charge other
1.1513-C devices, or use the magnetic attraction ring to attach to other phone
models that have wireless charging, however the charging speed will be slower.
Q: What is the wattage of this power bank?
A: This wireless power bank charges the iPhone 12/13 series phones with a
maximum output of 7.5W.
Q: Will the wireless magnetism work if the phone has a case?
A: This magnetic wireless charging mobile power can work well with the magsafe
iPhone 12/13 series phone case. If you use a normal case, the magnetic force
will be very weak. For that reason, it is generally advised that it will not
be effective with a thick protective case.
Q: Is it normal for the battery to heat up when charging?
A: Compared to conventional charging devices, wireless technology charging
devices tend to cause slight heat generation. However, this temperature is
within the normal operating temperature range of the phone, so please feel
free to use it despite it being slightly hotter.
FCC Statement
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void your authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
EU Representative: Ma Wei Aasheng International Investment Consulting GmbH
Address: Rodenberger Allee 23, 31542 Bad Nenndorf. Germany Tel: +49
15206266951
UK Representative: CET Product Service Ltd. Address: Beacon House Stokenchurch
Business Park, Ibstone Rd, Stokenchurch High Wycombe HP14 3FE UK Tel:
+447419325266
Customer Service:
support@eukers.com
www.eukers.com
FCC ID: 2A4M2-113 Made in China
Documents / Resources
|
euker I13 Magnetic Wireless Fast Charging Power
Bank
[pdf] User Manual
I13 Magnetic Wireless Fast Charging Power Bank, I13, Magnetic Wireless Fast
Charging Power Bank, Wireless Fast Charging Power Bank, Fast Charging Power
Bank, Charging Power Bank, Power Bank
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>