V-TAC VT-1191 LED Outdoor Wall Light Instruction Manual

V-TAC VT-1191 LED Outdoor Wall Light

TECHNICAL DATA

INTRODUCTION & WARRANTY

Thank you for selecting and buying the V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any other queries, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at your best.

The warranty is valid for 2 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours of Daily operation. Usage of the product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.

MULTI-LANGUAGE MANUAL QR CODE

Please scan the QR code to access the manual in multiple languages.

INSTRUCTIONS FOR THE LIGHT

1. Please make sure to turn off the power before starting the installation.
2. Installation must be performed by a qualified electrician.
3. The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
4. Proper grounding should be ensured throughout the installation.
5. For Indoor Use Only
6. This marking indicates that this product should not be disposed of with other household wastes.

Caution
Risk of electric shock. This product contains a light source of energy efficiency class, where shall be replaced by the energy class of the contained light source.

INSTALLATION DIAGRAM

1. Switch off the power before starting the installation.
2. Use screws to fix the mounting bar to the junction box.
3. Make the wire connections with connectors.
   • Connect the live wire (L) from the fitting to the live wire from the main power supply.
   • Connect the neutral wire (N) from the fitting to the neutral wire from the main power supply.
   • Connect the earth wire from the fitting to the earth wire from the main power supply.
   • Please pay close attention and make sure the wires are not exposed outside when wiring connections.
4. Use screws to fix the canopy to the mounting bar.
5. Check if the installation is completed and turn on the power
   Note: This light is designed with adjustable height, press the pin on the canopy to adjust the height of the light.

Please scan the QR code to access the manual in multiple languages.
In case of any query/issue with the product, please reach out to us at: support@v-tac.eu
For More product range, inquiry please contact our distributor or nearest dealers.
V-TAC EUROPE LTD. Bulgaria, Plovdiv 4000, bul.L.Karavelow 9B

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>