ListenTALK LK-1 Transceiver User Guide

: June 10, 2024
: LISTEN

Table of Contents

ListenTALK LK-1 Transceiver
Product Information
OVERVIEW
INTRODUCTION
Charge ListenTALKs
Power On
- Create a Group
Connect Headsets
BASIC OPERATION
Documents / Resources

ListenTALK LK-1 Transceiver

Listen-TALK-LK-1-Transceiver-PRODUCT

Product Information

ListenTALK

ListenTALK is a wireless communication system that allows groups of people to easily and efficiently communicate with each other in various settings. The system consists of the following components:

LK-1 Transceiver
LKR-11 Receiver
Leader Clip (LK-1 only)
Display
Soft Buttons
Talk Button (LK-1 Only)
Micro USB to USB charger
Optional Docking Station
Status Indicator
Lanyard
Belt Clip
Alkaline Battery Case (optional)

Product Usage Instructions

Charge the ListenTALK devices by removing the protective screen cover and clear plastic battery isolation tab. Fully charge by connecting Micro USB to USB charger or charge in the optional Docking Station. Status Indicator will be lit solid when fully charged. Optionally, insert three AAA alkaline batteries into Transceivers equipped with the Alkaline Battery Case.
Power On: Press and hold Power Button to turn on. Press and hold three seconds to turn off. While the unit is on, momentarily press Power Button to activate status display and Leader soft buttons.
Create a Group: Create a Leader and Sub-Leaders (optional) by inserting red Leader Clips on LK-1. To create a Group, Pair Leader with Participants and Sub-Leaders in the Docking Station or using Near-Field Communications as follows: Press and momentarily hold Leader’s Right Soft Button. Then, touch Leader’s back to each Participant’s and Sub-Leader’s back. A beep Indicates successful pairing. Create multiple, independent ListenTalk Groups by repeating this process with additional units.
Connect Headsets : Connect Listen Technologies headsets or use standard smartphone earphones.
Basic Operation: Press Volume Up or Volume Down button to control volume.
Programming and ListenTALK Software Suite: The ListenTALK Software Suite, available at www.listentech.com/support/software/, features complete setup, inventory management, group creation, and naming. Many options are accessible from the Transceiver/Receiver internal menu. Please refer to the ListenTALK Operations Manual.
Hearing Safety: This product amplifies audio to a high level which could cause hearing damage. To protect your hearing, turn down the volume before putting on the Ear Speaker or Headset, then adjust it to your preference.
Medical Device Safety: Before using this product with an implantable or other medical device consult with your physician or the device manufacturer. Always confirm you are using this product in accordance with safety guidelines established by your physician or the manufacturer.
Recycling: Please help us protect the environment by properly disposing of batteries. Take batteries or equipment to any electronic recycling collection point or return them to the factory.

For additional details on use, adjustment, or programming, download the full ListenTALK Operations Manual from www.listentech.com/support/manuals. To purchase headsets and other accessories, visit: www.listentech.com/shop- listen.

LK-1 Transceiver
LKR-11 Receiver

OVERVIEW

Listen-TALK-LK-1-Transceiver-FIG-1

INTRODUCTION

Thank you for purchasing ListenTALK!
For additional details on use, adjustment, or programming, download the full ListenTALK Operations
Manual from www.listentech.com/support/manuals. To purchase headsets and other accessories, visit: www.listentech.com/shop-listen.

Charge ListenTALKs

Remove the protective screen cover and clear plastic battery isolation tab. Fully charge by connecting Micro USB to USB charger or charge in the optional Docking Station. Status Indicator will be lit solid when fully charged. Optionally, insert three AAA alkaline batteries into Transceivers equipped with the Alkaline Battery Case.

Power On

Press and hold Power Button to turn on. Press and hold three seconds to turn off.
While unit is on, momentarily press Power Button to activate status display and Leader soft buttons.

Create a Group

Create a Leader and SubLeaders (optional) by inserting red Leader Clips on LK-1. To create a Group, Pair Leader with Participants and
Sub-Leaders in the Docking
Station or using Near-Field
Communications as follows: Press and momentarily hold Leader’s Right Soft Button.
Then, touch Leader’s back to each Participant’s and Sub-Leader’s back. A beep
Indicates successful pairing.
Create multiple, independent ListenTalk Groups by repeating this process, with additional units.

Connect Headsets

Connect Listen Technologies headsets or use standard smart-phone earphones.

BASIC OPERATION

Press Volume Up or Volume
Down button to control volume.
Leader (LK-1 only) – Press
Talk Button to toggle between
Talk and Mute. Press and momentarily hold Left Soft
Button to select Talkback modes (Off, Leader or Group).
Right Soft Button initiates pairing.
Participant – Press and hold
Talk Button to speak; release to mute. Soft Buttons have no function.
Note: LKR-11 has no Talkback functionality. Programming and ListenTALK Software Suite
The ListenTALK Software Suite, available at www.listentech.com/support/software/,features complete setup, inventory management, group creation and naming.
Many options are accessible from the Transceiver/Receiver internal menu. Please refer to the ListenTALK Operations Manual.

Hearing Safety

This product amplifies audio to a high level which could cause hearing damage. To protect your hearing, turn down the volume before putting on the
Ear Speaker or Headset, then adjust to your preference.

Medical Device Safety

Before using this product with an implantable or other medical device consult with your physician or the device manufacturer. Always confirm you are using this product in accordance with safety guidelines established by your physician or the manufacturer.

Recycling

Please help us protect the environment by properly disposing of batteries. Take batteries or equipment to any electronic recycling collection point or return them to the factory.

Listen to Technologies