Keychron K5 Pro Bluetooth Mechanical Keyboard User Manual
- June 10, 2024
- Keychron
Table of Contents
Keychron K5 Pro Bluetooth Mechanical Keyboard
IN THE BOX
- Keychron KS Pro Bluetooth Mechanical Keyboard x 1
- Type-C Cable x 1
- Manual x 1
- Quick Start Guide x 1
- Extra Keycaps Set x 1
QUICK START GUIDE
- If you are a Windows user, please find the appropriate keycaps in the box, then follow the instructions below to find and replace the following keycaps.
- Connect Bluetooth
- Press fn + 1 (for 4 seconds) and pair with a device named Keychron KS Pro.
- Connect Cable
- The VIA Key Remapping Software
- Please visit caniusevia.com to download the latest VIA software to remap the keys.
- If the VIA software cannot recognize your keyboard, please reach out to our support to get the instruction. (VIA only works when the keyboard is connected by wire to the computer.)
- The Layers
- There are four layers of key settings on the keyboard. The layer O and Layer 1 are for the Mac system. Layer 2 and Layer 3 are for the Windows system
- If your system toggle is switched to Mac, then layer O will be activated.
- If your system toggle is switched to Windows, then the layer 2 will be activated.
- Remember that if you are using it in Windows mode, please make changes to the layer 2 instead of the top layer (the layer 0).
- This is a common mistake people are making.
- The Backlight
- Press fn + Q to change the lighting effect
- Press fn + tab to turn the backlight on/off
- Adjust The Backlight Brightness
- Press fn + W to increase the backlight brightness
- Press fn + S to decrease the backlight brightness
- Adjust The Backlight Speed
- Press In + T to increase the light effect speed
- Press In + G to decrease the light effect speed
- Warranty
- The keyboard is highly customizable and easy to be rebuilt. If anything goes wrong with any of the keyboard components of keyboard during the warranty period, we will only replace the defective parts of the keyboard, not the whole keyboard.
- Watch The Building Tutorial On Our Website
- If you are building the keyboard for the first time, we highly recommend you watch the building tutorial video on our website first, then start building the keyboard yourself.
- Factory Reset
Troubleshooting? Don’t know what’s going on with the keyboard?
- Plug in the power cable and switch the keyboard to Cable mode.
- Factory reset the keyboard by pressing fn + J + Z (for 4 seconds).
- Download the right firmware and QMK Toolbox from our website.
- Switch the keyboard to OFF mode and remove the space bar keycap to find the reset button on the PCB.
- Hold the reset key first, then switch the keyboard to Cable mode.
- Release the reset key, and the keyboard will now enter DFU mode.
- Flash the firmware with the QMK Toolbox.
- Factory reset the keyboard again by pressing fn + J + Z (for 4 seconds).
- Step by step guide can be found on our website.
KS PRO BLUETOOTH MECHANICAL KEYBOARD SPECIFICATIONS
- Number of keys : 108
- Switch type: Mechanical
- Battery: 2000mAh
- Working time: Around 35 hours with the backlight on
- Charging time: Around 3 hours
- Charging port: USB Type-C
- Mode: Bluetooth / Wired
- Bluetooth operating distance : Within 10 meters (open space)
- Name of Bluetooth device: Keychron KS Pro
- Operating Environment: -10 to 50°c
- Technical specifications can be subjected to change without notice we apologize for any inconvenience caused.
KS PRO BLUETOOTH MECHANICAL KEYBOARD OVERVIEW
- Caps Lock Indicator
- Bluetooth Indicator
- Type-C Port
- Bluetooth OFF Cable (Mode Toggle Switch)
- Win/Android Mac/iOS (OS Toggle Switch)
DEFAULT KEY LAYOUT
LAYER 0: This layer will be activated when your keyboard’s system toggle
is switched to Mac.
LAYER 1: This layer will be activated when your keyboard’s system toggle
is switched to Mac and press the fn/M0(1) key.
LAYER 2 : This layer will be activated when your keyboard’s system toggle
is switched to Windows.
LAYER 3: This layer will be activated when your keyboard’s system toggle
is switched to Windows and press the fn/M0(3) key.
KEY DESCRIPTION
Key Description
Ser-| ****
Screen Brightness Decrease
Ser+
| ****
Screen Brightness Increase
Bright-
| ****
Backlight Decrease
Bright+
| ****
Backlight Increase
Prvs
| ****
Previous
Play
| ****
Play/Pause
Next
| ****
Next
Mute
| ****
Mute
Vol-
| ****
Volume Decrease
Vol+
| ****
Volume Increase
RGB Toggle| ****
Turn Backlight on/off
RGBMd+
| ****
RGB Mode Next
Key Description
RGBMd-
| ****
RGB Mode Previous
Hue+
| ****
Hue Increase
Hue-
| ****
Hue Decrease
RGB SPI
| ****
RGB Speed Increase
RGB SPD
| ****
RGB Speed Decrease
M0{1)
| Layer 1 will be activated
when holding this key
M0{2)
| Layer 2 will be activated
when holding this key
M0{3)
| layer 3 will be activated
when holding this key
M0{4)
| Layer 4 will be activated
when holding this key
BTH1
| Bluetooth Host 1
BTH2
| ****
Bluetooth Host 2
BTH3
| ****
Bluetooth Host 3
LED STATUS OVERVIEW
| LED Location | Function | Status |
|---|---|---|
| **** Battery indicator | **** Charging | Low battery – Blinking Red Charging – |
Static Red
Fully charged – Static Green
Bluetooth indicator| Bluetooth| Pairing – Slow Blinking Paired – Light Off Switching – Fast Blinking
FUNCTION DESCRIPTION
CHARGING
- Plug the cable into a USB port and plug the other end into the keyboard port. Charging Indicator: When battery is below 15%, a red battery blinking indicator will be triggered. A red light will stay on while charging; Fully charged in around 3 hours, a green battery indicator will appear.
- The Keychron keyboard is compatible with all USB ports. Please use a SV 1A adapter or USB 3.0 for the best performance. The Keychron KS Pro can be charged in Bluetooth/on/off mode.
- This product supports up to SV charging voltage and 1A charging current. We are not responsible for any problems caused by improper charging.
BLUETOOTH / WIRED MODE (MODE TOGGLE SWITCH)
WIRED MODE
- Switch the toggle switch to the Cable option (it only works when a USB cable is plugged in).
- Connect our cable with your PC and keyboard.
- Backlighting will be turned on.
- Under Wired Mode, keyboard will not enter into Battery Saver Mode.
BLUETOOTH MODE
- Switch the toggle switch to the Bluetooth option.
- Backlighting will be turned on.
- Hold “fn+1” key for 4 seconds to activate Bluetooth pairing (the Bluetooth indicator fast flashes for 3 minutes to detect pairing).
- Search for the Bluetooth device “Keychron KS Pro” on your device and connect it (the Bluetooth indicator goes off after successful pairing).
- Note: This keyboard supports pairing up to 3 devices simultaneously via key combination “fn” + • 1 • I “fn” + “2” I “fn” + “3~
- The Bluetooth indicator will continue to flash for 3 minutes.
- stow or failed connections may exist due to different Bluetooth versions, please make sure all the settings are correct.
SWITCH BLUETOOTH DEVICES
- Short press key combination “fn” + •1• / “fn” + “2” / “fn” + “3” to switch to other device.
RECONNECT:
- Switch the keyboard to the Bluetooth option to activate the keyboard.
- The Bluetooth indicator flashes for 4 seconds and automatically pairs with the last paired device.
- If the Bluetooth indicator is off, press any button to enter the connection again.
- The keyboard must have been paired with the device to perform this function.
TURN OFFTHE KEYBOARD
- Switch the keyboard to the OFF option.
BACKLIGHT SETTING
- Short press to switch between different types of lighting effects.
- When backlighting is on, press button to switch among them.
OS TOGGLE SWITCH
MAC/iOS
- Switch the toggle to Mac/iOS when the keyboard is connected to a Mac or iOS operating system.
WINDOWS/ANDROID
- Switch the toggle to Windows/Android when the keyboard is connected to a Windows or Android operating system.
- When using the Windows/Android mode, keys are used for “Windows” and “Alt” functions
INPUT METHOD SWITCH
ForiOS:
- Input method switch: Ctrl + Space
- Caps Lock: Caps (Enable General>Keyboards>Hardware Keyboard>Caps Lock Language Switch)
For Android:
- Input method switch: Shift+ Space
- NOTE: Functions of certain multimedia key may be disabled due to compatibility, versions, brands and drivers of Windows/Android OS. We also recommend not to switch OS frequently as it may impact keyboard operations.
TROUBLESHOOTING
- If unable to pair keyboard to device, confirm that the device you’re trying to pair with is
- Bluetooth-capable. If so, restart the device and try pairing it with the keyboard again.
- Note: On a Windows computer, a new Bluetooth connection will sometimes require additional software updates-a process that may still be ongoing after a message appears indicating a successful
- completion. Wait at least 20 minutes after pairing to make sure all updates are completed before restarting the computer.
- Confirm that the device is configured to accept Bluetooth connections (Windows) and supports an external keyboard (HID profile).
- Go to Bluetooth Devices > Open Settings and select the following:
- Allow Bluetooth devices to find this computer
- Allow Bluetooth devices to connect to this computer
- Alert me when a Bluetooth device wants to connect
My keyboard isn’t working.
- For the computer/smartphone:
- Go to your device Bluetooth settings>Select the keyboard and remove/delete/unpair it.
- Then restart your device.
For the keyboard:
- Turn the keyboard off and back on. Then reconnect it to your device.
Bluetooth connection is interrupted even within 10 meters.
- Check if the keyboard is resting on a metal surface that can interfere with the Bluetooth signal.
Third-party input tools are not compatible with the keyboard.
- Due to compatibility, versions, brands and drivers of Windows/Android OS, functions of third-party input tools may be affected while using the keyboard. Please make sure your operating system and drivers are up to date.
Certain multimedia keys or function keys do not work.
- Functions of certain multimedia keys may be disabled due to compatibility, versions, brands, and drivers of devices.
- Multimedia keys
- Function keys:
Safety Precaution
- Keep the product, accessories and packaging parts out of the reach of children to prevent any accidents and choking hazards.
- Always keep the product dry to avoid corrosion.
- Do not expose the product to extreme temperatures below -10°C(S°F) or above 50°C(131°F) to preserve the lifespan of the keyboard.
- Keychron, Inc.
- Dover, DE 19901, United States
- Find us at:
- https://www.keychron.com
- Support@keychron.com
- keychron
- @keychron
- @keychronMK
- Designed by Keychron
- Made in China
Documents / Resources
|
Keychron K5 Pro Bluetooth Mechanical
Keyboard
[pdf] User Manual
K5 Pro Bluetooth Mechanical Keyboard, K5 Pro, Bluetooth Mechanical Keyboard,
Mechanical Keyboard, Keyboard
---|---
|
Keychron K5 Pro Bluetooth Mechanical
Keyboard
[pdf] User Guide
K5 Pro Bluetooth Mechanical Keyboard, K5 Pro, Bluetooth Mechanical Keyboard,
Mechanical Keyboard, Keyboard
|
Keychron K5 Pro Bluetooth Mechanical
Keyboard
[pdf] User Guide
K5 Pro Bluetooth Mechanical Keyboard, K5 Pro, Bluetooth Mechanical Keyboard,
Mechanical Keyboard, Keyboard
References
- VIA
- How to use VIA to program your keyboard – Keychron | Mechanical Keyboards for Mac, Windows and Android
- K5 Pro Factory Reset and Firmware Flash – Keychron | Wireless Mechanical Keyboards for Mac, Windows and Android
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>