FtyCamPro Camera App User Manual: Learn How to Use SXT1 and 2AVVA-SXT1 Models

The FtyCamPro Camera App Owner’s Manual provides detailed instructions on how to use the SXT1 and 2AVVA-SXT1 models of the FtyCamPro camera app. The manual includes information on how to download and install the app, add a networked camcorder, and control the device on the video interface. The advanced configuration page is also explained, which includes configuring the Wi-Fi connection for the camcorder, setting up SD card recording, and enabling or disabling motion detection alarm. The manual also provides basic settings and indicator status for new camcorders or those installed in a new location. The FAQ section addresses common questions, such as why the app fails to detect the camcorder or match a network, how to reset the camcorder to factory settings, and how to get clear images. The manual concludes with FCC warning and compliance information. Overall, the FtyCamPro Camera App Owner’s Manual is a comprehensive guide for users who want to learn how to use the FtyCamPro camera app effectively.

App Installation

1. Download and install FtyCamPro: please use App Store and GooglePlay for IOS and Android versions respectively To facinate installation, please scan the QR code below to install FtyCamPro. If your device is unable to connect to CocaPlay. you can scan the APK OR code below.
   Note: You are advised to use an original or third-party OR code scanner to download the App. The App cannot be downloaded by using the scanner of We Chat.
   https://qr06.cn/E5lwDP

2. CIick*+” to add a networked camcorder (the name is similar to XX X-n nnnnn-MYY), and the device will automat icallyconnect.

3. After switching to the Val connection page, select the corresponding WiFi hotspot and connect. After t he connection issuccessful, return to the APP, and thedelice is added successfully.(If the APP does not automatically add a device, click Search to add the searched device)

4. Please fill in thecamcorder name and P2P password (default password: admin).ClickeYes”.T he camcorder is successfully added.You are advised to modify the P2P password af ter the camcorder settings are finished.

5. After thecamcorder is success( ully con netted, click the newly added camcorder for real-time videos. Th e devi ce can be controlled on the video interface.

6. Icons and buttonson the videopage

7. Other page functions

Camera Settings

1. Click the gear button to enter the advanced configuration page
2. Configure the Will connection for the camcorder.SelectiNiFi settingeto display available Wi-Fi hot spots. Select your WI-Fi network name(SSID), input the password, a nd press the “Completing’ b ut to n Note:If the camcorder is in Win status after being saved, it will disconnect thecurrent the current connect ion for a new WiFi network, which will makethe camcorder off line for about one minute in the APP.
3. SD card recording settings: Set the SD card mode and recording.
4. Alarm configurat ion: Enable 0 r disable mot ion detection alarm set theinterval for alarms.

Basic Settings and Indicator Status

A new camcorder or camcorder is installed in a new location, please reset the camcorder to factory settings. (Alter the camcorder is started, press and hold the camcorder reset button for more than 5 seconds), after the camcorder restarts turn on the AP mode, the WiFi indicator flashes slowly I Flashes one 0.5 seconds) . Then open the phone settings, connect the phone to the camcorder AP hot spot(the WiFi network yeah the camcorder Ul D), and wait for the phone to switch to the camcorder WiFi net word before opening the App.
Indicator Status: 1. In AP mode after booting, the blue indicator is always on and the red indicator is the USB power indicator, and it goes out after fully charged. 2. When configuring WiFi routing, the red indicator is normally on, while the blue one flickers rapidly. After a successful configuration, the blue indicator is normally on. (Please confirm whether the WiFi password is correct if the blue indicator keeps flickering rapidly) 3. The green indicator is a charging indicator, and it will automatically go out after the camcorder is fully charged.
Note: Please inspect the following items if the App keeps prompting failures: A, Before configuring the WiFi network, the camcorder indicator does not flicker slowly or it is not started; B. The phone fails to connect to the camcorder AP, and Its required to connect the phone to the AP hotspot of the camcorder; C. An ordinary router is compatible, but the public router fails to be compatible because it is required to ‘Non for authentication; D. Avoid any mistake of network name, password, and 1110; E. Chinese WiFi names, passwords and special symbols are not compatible currently; F. 56 WiFI signals are not compatible;
FAQ 4 0: Why does the APP fail to detect the camcorder/match a network? A: Please ensure the device is correctly connected and inspect whether the APP operation is restricted. 2.0: Why does the camcorder keep asking me to input user name and password? Or why does it prompt incorrect user name? A:The default password is ad min. If you forget your user name and password, please reset it to factory settings to get the default user name and password. 3.0: How can I reset the camcorder to factory settings? A:Press the reset button for about 5 second subbl the camcorder S restarted. 4.0: Why is the image vague? A: Remove the protective film for the lens If it’s still vague. you can rotate the lens and focus to get clear images.

Indicator Status:

1. In AP mode after booting, the blue indicator is always on and the red indicator is the USB power indicator, and it out after fully charged.
2. When configuring WiFi routing, the red indicator is normally on, while the blue one flickers rapidly. After a successful configuration, the blue indicator is normally on. (Please confirm whether the WiFi password is correct if the blue indicator keeps flickering rapidly
3. The green indicator is a charging indicator, and it will automatically go out after the camcorder is fully charged.

Note: Please inspect the following items if the App keeps prompting failures: A. Before configunng the WiFi network, the camcorder indicator does not flicker slowly or it is not started; B. The phone fails to connect to the camcorder AP, and it is required to connect the phone to the A P hotspot of the camcorder; C. An ordinary router is compatible, but the public router fails to be compatible because it .s re quires to logon for authentication; D. Avoid any mistake of network name, password, and Ul D; E. Chinese WiFi names, passwords and special symbols are not compatible currently; F. 56 WiFi signals are not compatible;

Specifications

code
Network Connection| Automatically connects to networked camcorder
Advanced Configuration| Configures Wi-Fi connection, SD card recording, and motion detection alarm
Basic Settings| Reset camcorder to factory settings, indicator status
FAQ| Addresses common questions such as detecting camcorder, resetting to factory settings, and getting clear images
FCC Warning and Compliance| Complies with FCC rules and radiation exposure limits

FAQ

Why does the APP fail to detect the camcorder/match a network?
Please ensure the device is correctly connected and inspect whether the APP operation is rest,,,

Why does the camcorder keep asking me to Input user name and password? Or Why does it prompt incorrect user name?
The default password is ad min. If you forget your user name and password, please reset it to factory settings to get the default user name and password.

How can I reset the camcorder to factory settings?
Press the reset button for about 5 second subtil the camcorder is restarted. 4.0: Why is the image vague? A: Remove the protective film for the tens If it’s still vague, you can rotate the lens and focus to get clear images.

How do I download and install the FtyCamPro app?

You can download and install the FtyCamPro app from the App Store for iOS devices or Google Play for Android devices. You can also scan the QR code provided in the manual to download the app.

How do I add a networked camcorder to the app?

Click on the “+” button and select the networked camcorder with a name similar to “XX X-n nnnnn-MYY.” The device will automatically connect. If the app does not automatically add the device, click on “Search” to add the searched device. Fill in the camcorder name and P2P password (default password: admin) and click “Yes” to successfully add the camcorder.

How do I control the camcorder on the video interface

After successfully connecting the camcorder, click on the newly added camcorder for real-time videos. The device can be controlled on the video interface.

How do I configure the Wi-Fi connection for the camcorder?

Click on the gear button to enter the advanced configuration page. Select “Wi- Fi settings” to display available Wi-Fi hotspots. Select your Wi-Fi network name (SSID), input the password, and press the “Completing” button.

How do I enable or disable motion detection alarm?

In the advanced configuration page, go to “Alarm configuration” and enable or disable motion detection alarm. You can also set the interval for alarms.

Why is the image vague?

Remove the protective film for the lens. If it’s still vague, you can rotate the lens and focus to get clear images.

What should I do if the app keeps prompting failures?

Please inspect the following items: A. Before configuring the Wi-Fi network, the camcorder indicator does not flicker slowly or it is not started; B. The phone fails to connect to the camcorder AP, and it is required to connect the phone to the AP hotspot of the camcorder; C. An ordinary router is compatible, but the public router fails to be compatible because it requires to logon for authentication; D. Avoid any mistake of network name, password, and UID; E. Chinese Wi-Fi names, passwords, and special symbols are not compatible currently; F. 5G Wi-Fi signals are not compatible.

FCC FCC WARNING : Note: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected -Consult the dealer or an experienced radio/TV technician for help This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
: This device corn plies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference. and (2) this device must accept any interference received including interference that may cause undesired operation

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>