STAIRVILLE 432585 Wild Wash Pro 648 LED RGB DMX User Manual

: June 10, 2024
: STAIRVILLE

STAIRVILLE 432585 Wild Wash Pro 648 LED RGB DMX

STAIRVILLE 432585 Wild Wash Pro 648 LED RGB DMX-
PRODUCT

Product Information

The Wild Wash Pro 648 LED spotlight is available in three different models: Wild Wash Pro 648 LED RGB DMX, Wild Wash Pro 648 LED White DMX, and Wild Wash Pro 648 WW DMX. This spotlight is powerful and versatile lighting fixture that provides high-quality illumination for a variety of applications. It comes with a user manual that provides detailed information on its features, installation, connections, controls, technical specifications, plug and connection assignment, troubleshooting, cleaning, and environmental protection.

Features

LED RGB DMX, LED White DMX, and WW DMX models available
648 high-quality LEDs
DMX control for precise lighting effects
Variable strobe and dimming options
IP65 rated for outdoor use
Powerful and versatile spotlight

Technical Specifications

Power supply: AC 100-240V, 50/60Hz
Power consumption: 600W max.
Light source: 648 x 1W/3W LED
DMX channels: 2/5/7/9/12/14/21/24/36/48/54/60
IP rating: IP65
Operating temperature : -20°C to +40°C
Dimensions: 505 x 505 x 205mm
Weight: 10kg

Product Usage Instructions

Before using the Wild Wash Pro 648 LED spotlight, please read the user manual carefully and follow all safety instructions.

Installation

Mount the spotlight securely using the mounting bracket included in the package. 2. Connect the power cord to the AC power source.
Connect the DMX cables to the DMX input and output ports.

Starting up

Turn on the AC power source. 2. Set the DMX channel and address using the controls on the spotlight or through a DMX controller. 3. Adjust the lighting effects, strobe and dimming options using the controls on the spotlight or through a DMX controller.

Connections and Controls

The Wild Wash Pro 648 LED spotlight features several connectors and controls, including:

Power connector
DMX input and output ports
LED display
Control buttons for mode, address, DMX channel, strobe, dimming, and color mixing

Cleaning

To clean the Wild Wash Pro 648 LED spotlight, gently wipe it with a soft, dry cloth. Do not use any abrasive cleaning agents or solvents as they may damage the surface of the spotlight.

Troubleshooting

If you experience any issues with the Wild Wash Pro 648 LED spotlight, please refer to the troubleshooting section in the user manual for possible solutions. If you are unable to resolve the issue, please contact customer service for assistance.

Wild Wash Pro 648 LED RGB DMX,
Wild Wash Pro 648 LED White DMX,
Wild Wash Pro 648 WW DMX
LED spotlight
user manual

Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 Internet: www.thomann.de
24.01.2022, ID: 432585, 432586 (V3)

Wild Wash Pro 648 LED RGB DMX, Wild Wash Pro 648 LED White DMX, Wild Wash Pro 648 WW DMX

General information

1 General information
This user manual contains important information on the safe operation of the device. Read and follow all safety notes and all instructions. Save this manual for future reference. Make sure that it is available to all persons using this device. If you sell the device to another user, be sure that they also receive this manual. Our products and user manuals are subject to a process of continuous development. We there- fore reserve the right to make changes without notice. Please refer to the latest version of the user manual which is ready for download under www.thomann.de.
Wild Wash Pro 648 LED RGB DMX, Wild Wash Pro 648 LED White DMX, Wild Wash Pro 648 WW DMX
5

General information

1.1 Further information
On our website (

) you will find lots of further information and details on the following points:

Download

This manual is also available as PDF file for you to download.

Keyword search

Use the search function in the electronic version to find the topics of interest for you quickly.

Online guides

Our online guides provide detailed information on technical basics and terms.

Personal consultation For personal consultation please contact our technical hotline.

Service

If you have any problems with the device the customer service will gladly assist you.

LED spotlight
6

General information

1.2 Notational conventions
This manual uses the following notational conventions:

Letterings

The letterings for connectors and controls are marked by square brackets and italics. Examples: [VOLUME] control, [Mono] button.

Displays

Texts and values displayed on the device are marked by quotation marks and italics. Examples: 24ch’ ,OFF’ .

Cross-references

References to other locations in this manual are identified by an arrow and the specified page number. In the electronic version of the manual, you can click the cross-reference to jump to the specified location.
Example: See Ä `Cross-references’ on page 7.

Wild Wash Pro 648 LED RGB DMX, Wild Wash Pro 648 LED White DMX, Wild Wash Pro 648 WW DMX
7

General information

1.3 Symbols and signal words

In this section you will find an overview of the meaning of symbols and signal words that are used in this manual.

Signal word

Meaning

DANGER! WARNING! NOTICE!

This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided.
This combination of symbol and signal word indicates a pos- sible dangerous situation that can result in death or serious injury if it is not avoided.
This combination of symbol and signal word indicates a pos- sible dangerous situation that can result in material and environmental damage if it is not avoided.

LED spotlight
8

Warning signs

General information
Type of danger Warning high-voltage. Warning dangerous optical radiation. Warning suspended load. Warning danger zone.

Wild Wash Pro 648 LED RGB DMX, Wild Wash Pro 648 LED White DMX, Wild Wash Pro 648 WW DMX
9

Safety instructions

2 Safety instructions

Intended use

This device is intended for use as an electronic lighting effect by means of LED technology. The device is designed for professional use only and is not suitable for use in households. Use the device only as described in this user manual. Any other use or use under other operating con- ditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use.
This device may be used only by persons with sufficient physical, sensorial, and intellectual abilities and having corresponding knowledge and experience. Other persons may use this device only if they are supervised or instructed by a person who is responsible for their safety.

Extend the operating life of the device by regular breaks and by avoiding frequent switching on and off. The device is not suitable for continuous operation.

LED spotlight
10

Safety instructions

Safety

DANGER! Danger for children Ensure that plastic bags, packaging, etc. are disposed of properly and are not within reach of babies and young children. Choking hazard! Ensure that children do not detach any small parts (e.g. knobs or the like) from the unit. They could swallow the pieces and choke! Never let children unattended use electrical devices.
DANGER! Electric shock caused by high voltages inside Within the device there are areas where high voltages may be present. Never remove any covers. There are no user-serviceable parts inside. Do not use the device if covers, protectors or optical components are missing or damaged.
DANGER! Electric shock caused by short-circuit Always use proper ready-made insulated mains cabling (power cord) with a protective contact plug. Do not modify the mains cable or the plug. Failure to do so could result in electric shock/death or fire. If in doubt, seek advice from a registered electrician.
WARNING! Eye damage caused by high light intensity Never look directly into the light source.

Wild Wash Pro 648 LED RGB DMX, Wild Wash Pro 648 LED White DMX, Wild Wash Pro 648 WW DMX
11

Safety instructions
WARNING! Risk of epileptic shock Strobe lighting can trigger seizures in photosensitive epilepsy. Sensitive persons should avoid looking at strobe lights.
NOTICE! Risk of fire Do not block areas of ventilation. Do not install the device near any direct heat source. Keep the device away from naked flames.
NOTICE! Operating conditions This device has been designed for indoor use only. To prevent damage, never expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and strong vibrations. Only operate the device within the ambient conditions specified in the chapter `Technical specifications’ of this user manual. Avoid heavy temperature fluctuations and do not switch the device on immediately after it was exposed to temperature fluctuations (for example after transport at low outside temperatures). Dust and dirt inside can damage the unit. When operated in harmful ambient conditions (dust, smoke, nicotine, fog, etc.), the unit should be maintained by qualified service personnel at regular intervals to prevent overheating and other malfunction. NOTICE! Power supply Before connecting the device, ensure that the input voltage (AC outlet) matches the voltage rating of the device and that the AC outlet is protected by a residual current circuit breaker. Failure to do so could result in damage to the device and possibly injure the user. Unplug the device before electrical storms occur and when it is unused for long periods of time to reduce the risk of electric shock or fire.
LED spotlight
12

Safety instructions
NOTICE! Possible damage due to installation of a wrong fuse The use of different types of fuses can cause serious damage to the unit. Fire hazard! Only fuses of the same type may be used.
NOTICE! Possible staining The plasticiser contained in the rubber feet of this product may possibly react with the coating of your surface and after some time cause permanent dark stains. In case of doubt, do not put the rubber feet directly on the surface and use a suitable underlay if neces- sary, i.e. felt- pad floor protectors or similar. NOTICE! Risk of overheating The distance between light output and the illuminated surface must be more than 1.5 m (19.7in). Provide sufficient ventilation. The ambient temperature must always be below 40 °C (104 °F). NOTICE! Fire hazard due to exceedance of the maximum current The device can power other devices of identical construction. The current consumption of all other devices connected in series must not exceed the values indicated in the technical specifications. Otherwise you risk injuries and irreparable damages to the device. Only connect so many identical devices that the maximum current consumption is not exceeded. Ensure the sufficient dimensioning (wire cross section) of the power cables used for all devices connected in series.
Wild Wash Pro 648 LED RGB DMX, Wild Wash Pro 648 LED White DMX, Wild Wash Pro 648 WW DMX
13

Features

The LED spotlight is particularly suitable for lighting applications in clubs, night clubs, on rock stages, in theatres and musicals. It can also be used for effect lighting of stage backgrounds and as blinder.
Special features of the device: n Equipped with SMD LEDs with 0.2 W power consumption each, depending on the model
version: Stairville Wild Wash Pro 648 LED RGB DMX (item no. 432585): 648 tricolour LEDs (RGB) Stairville Wild Wash Pro 648 LED White DMX (item no. 432586): 648 cold white LEDs Stairville Wild Wash Pro 648 WW DMX (item no. 481229): 648 warm white LEDs n Control via DMX (different modes depending on the model version) and via buttons and display on the unit n Built-in automatic show programmes n Sound control n Master / Slave mode n Robust metal housing with compact design n Versatile installation and mounting options with the included two-piece mounting bracket
LED spotlight

Features
For technological reasons, the light output of LEDs decreases over their lifetime. This effect increases with higher operating temperature. You can extend the service life of the illuminants by providing adequate ventilation and operating the LEDs with the lowest possible brightness.
Wild Wash Pro 648 LED RGB DMX, Wild Wash Pro 648 LED White DMX, Wild Wash Pro 648 WW DMX
15

Installation

Unpack and check carefully there is no transportation damage before using the unit. Keep the equipment packaging. To fully protect the product against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively.
You can install the device standing or hanging. When in use, the device must be mounted at a solid surface or clamped to an approved truss.
Work from a stable platform whenever you install or move the device or when you perform any kind of maintenance. Block access under the work area.

WARNING!
Risk of injury caused by falling objects
Make sure that the installation complies with the standards and rules that apply in your country. Always secure the device with a secondary safety attachment, such as a safety cable or a safety chain.

LED spotlight
16

Installation
NOTICE! Risk of overheating The distance between light output and the illuminated surface must be more than 1.5 m (19.7in). Provide sufficient ventilation. The ambient temperature must always be below 40 °C (104 °F).
NOTICE! Possible data transmission errors For error-free operation make use of dedicated DMX cables and do not use ordi- nary microphone cables. Never connect the DMX input or output to audio devices such as mixers or ampli- fiers.
Wild Wash Pro 648 LED RGB DMX, Wild Wash Pro 648 LED White DMX, Wild Wash Pro 648 WW DMX
17

Installation

Please note that this device must not be connected to a dimmer.

LED spotlight
18

Starting up

5 Starting up

Create all connections while the device is off. Use the shortest possible high-quality cables for all connections. Take care when running the cables to prevent tripping hazards.

Wild Wash Pro 648 LED RGB DMX, Wild Wash Pro 648 LED White DMX, Wild Wash Pro 648 WW DMX
19

Starting up

Connections in DMX mode

Connect the DMX input of the device to the DMX output of a DMX controller or another DMX device. Connect the output of the first DMX device to the input of the second one, and so on to form a daisy chain. Always ensure that the output of the last DMX device in the daisy chain is terminated with a resistor (110 , ¼ W).

LED spotlight
20

Starting up

Connections in master/slave mode

When you configure a group of devices in master/slave mode, the first unit will control the other units for an automatic, sound-activated, synchronized show. This function is ideal when you want to start a show immediately. Connect the DMX output of the master device to the DMX input of the first slave device. Then connect the DMX output of the first slave device to the DMX input of the second slave device and so on.

Wild Wash Pro 648 LED RGB DMX, Wild Wash Pro 648 LED White DMX, Wild Wash Pro 648 WW DMX
21

Connections and control

1 Display and control buttons [MENU] Activates the main menu and toggles between menu items. [UP] Increases the displayed value by one. [DOWN] Decreases the displayed value by one. [ENTER] Selects an option of the respective operating mode.
2 [DMX IN] DMX input sockets, three- and five-pin [DMX OUT] DMX output sockets, three- and five-pin

Connections and controls

Wild Wash Pro 648 LED RGB DMX, Wild Wash Pro 648 LED White DMX, Wild Wash Pro 648 WW DMX
23

Connections and controls
3 [MIC] Microphone for sound control
4 [POWER IN] Lockable input socket (Power Twist) for powering the device [POWER OUT] Lockable output socket (Power Twist) for powering a connected device (maximum output current 16 A)
5 Safety cable eyelet. 6 Two-piece bracket for hanging or installation and for securing the safety cable 7 Locking screw for fixing the spotlight 8 [FUSE] Fuse holder
LED spotlight
24

Operating
7 Operating
7.1 Starting the device
Connect the device to the power supply to start operation. After a few seconds, the display indicates that a reset is in progress. The device is then ready for use. The display shows the operating mode that was selected when the unit was last powered off.
Wild Wash Pro 648 LED RGB DMX, Wild Wash Pro 648 LED White DMX, Wild Wash Pro 648 WW DMX
25

Operating

Main menu

Operating mode `DMX’

This setting is only relevant if the device is controlled via a DMX controller.
Press [MODE] repeatedly until one of the available DMX modes appears in the display and press [ENTER]. Use [UP] and [DOWN] to select the desired DMX mode and press [ENTER].
The following table shows the DMX modes available depending on the version.

Model version
Stairville Wild Wash Pro 648 LED RGB DMX (item no. 432585)
Stairville Wild Wash Pro 648 LED White DMX (item no. 432586)
Stairville Wild Wash Pro 648 WW DMX (item no. 481229)

Available DMX modes 1CH, 2CH1, 2CH2, 3CH1, 3CH2, 3CH3, 4CH, 6CH 1CH, 2CH, 3CH, 5CH, 7CH

LED spotlight
26

Operating

DMX address

This setting is only relevant if the device is controlled via a DMX controller.
Press [MODE] repeatedly until the currently set DMX address appears in the display ( Axxx’ ) and press [ENTER]. Use [UP] and [DOWN] to select the desired DMX address between 1 (A001′ ) and 512 ( `A512′ ) and press [ENTER].

Operating mode `Manual con- trol’ (white LED model version)

This setting is only relevant if the device is not controlled via a DMX controller and not working as slave in a master / slave configuration. In this mode, the brightness of the white LEDs can be adjusted and a Strobe effect can be engaged.
Press [MODE] repeatedly until C000′ appears in the display and press [ENTER]. Use [UP] and [DOWN] to select the menu itemC1xx’ for the brightness or the menu item CFxx’ for the Strobe effect and press [ENTER]. For the brightness, use [UP] and [DOWN] to select a value betweenC101′ (minimum bright- ness) and C199′ (maximum brightness) orC100′ (blackout, LEDs off) and press [ENTER].
For the Strobe effect, use [UP] and [DOWN] to select a value between CF01′ (strobe frequency approx. 1 Hz) andCF99′ (strobe frequency approx. 30 Hz) or `CF00′ (continuous light, no Strobe effect) and press [ENTER].

Wild Wash Pro 648 LED RGB DMX, Wild Wash Pro 648 LED White DMX, Wild Wash Pro 648 WW DMX
27

Operating

Operating mode `Manual con- trol’ (RGB LED model version)

This setting is only relevant if the device is not controlled via a DMX controller and not working as slave in a master / slave configuration. In this mode, the intensity of the LEDs can be adjusted per colour and a Strobe effect can be engaged.
Press [MODE] repeatedly until C1xx’ appears in the display and press [ENTER]. Use [UP] and [DOWN] to select the menu itemC1xx’ , C2xx’ orC3xx’ for the brightness of the red, green or blue LEDs or the menu item CFxx’ for the Strobe effect and press [ENTER]. For the Strobe effect, use [UP] and [DOWN] to select a value betweenCF01′ (strobe frequency approx. 1 Hz) and CF99′ (strobe frequency approx. 30 Hz) or CF00′ (continuous light, no Strobe effect) and press [ENTER].

LED spotlight
28

Operating

Operating mode `Colour mac- ros’ (RGB LED model version)

This setting is only relevant if the device is not controlled via a DMX controller and not working as slave in a master / slave configuration. In this mode, one of the three primary colours or a predefined mixed colour can be selected.
Press [MODE] repeatedly until CMxx’ appears in the display and press [ENTER]. Use [UP] and [DOWN] to select a value betweenCM01′ and `CM015′ and press [ENTER]. The table below shows the colour assignment.

Setting CM01 CM02 CM03 CM04 CM05 CM06 CM07

Colour Red Amber Warm yellow Yellow Green Turquoise Cyan

Wild Wash Pro 648 LED RGB DMX, Wild Wash Pro 648 LED White DMX, Wild Wash Pro 648 WW DMX
29

Operating

Setting CM08 CM09 CM10 CM11 CM12 CM13 CM14 CM15

Colour Blue Lavender Mauve Magenta Pink Warm white White Cold white

LED spotlight
30

Operating

Operating mode `Automatic colour change’ (RGB LED model version)

This setting is only relevant if the device is not controlled via a DMX controller and not working as slave in a master / slave configuration. In this mode, the colours are changed at freely select- able speed, a Strobe effect can be engaged.
Press [MODE] repeatedly until JUxx’ appears in the display and press [ENTER]. Use [UP] and [DOWN] to select the menu itemJUxx’ for the colour change speed or the menu item JFxx’ for the Strobe effect. For the colour change speed, use [UP] and [DOWN] to select a value between JU00′ (minimum speed) and JU99′ (maximum speed) and press [ENTER]. For the Strobe effect, use [UP] and [DOWN] to select a value betweenJF01′ (strobe frequency approx. 1 Hz) and JF99′ (strobe frequency approx. 30 Hz) or JF00′ (continuous light, no Strobe effect) and press [ENTER].

Wild Wash Pro 648 LED RGB DMX, Wild Wash Pro 648 LED White DMX, Wild Wash Pro 648 WW DMX
31

Operating

Operating mode `Fading’ (white LED model version)

This setting is only relevant if the device is not controlled via a DMX controller and not working as slave in a master / slave configuration. In this mode, the LEDs will gradually fade in with a freely selectable speed from blackout to maximum brightness and reverse, a Strobe effect can be engaged.
Press [MODE] repeatedly until FA00′ appears in the display and press [ENTER]. Use [UP] and [DOWN] to select the menu itemFAxx’ for the fading speed or the menu item FFxx’ for the Strobe effect and press [ENTER]. For the fading speed, use [UP] and [DOWN] to select a value betweenFA01′ (minimum speed) and FA99′ (maximum speed) and press [ENTER]. For the Strobe effect, use [UP] and [DOWN] to select a value betweenFF01′ (strobe frequency approx. 1 Hz) and FF99′ (strobe frequency approx. 30 Hz) or FF00′ (continuous light, no Strobe effect) and press [ENTER].

LED spotlight
32

Operating

Operating mode `Fading’ (RGB LED model version)

This setting is only relevant if the device is not controlled via a DMX controller and not working as slave in a master / slave configuration. In this mode, the LEDs gradually change between the available colours at freely selectable speed, a Strobe effect can be engaged.
Press [MODE] repeatedly until FA00′ appears in the display and press [ENTER]. Use [UP] and [DOWN] to select the menu itemFAxx’ for the fading speed or the menu item FF00…FF99′ for the Strobe effect and press [ENTER]. For the fading speed, use [UP] and [DOWN] to select a value betweenFA01′ (minimum speed) and FA99′ (maximum speed) and press [ENTER]. For the Strobe effect, use [UP] and [DOWN] to select a value betweenFF01′ (strobe frequency approx. 1 Hz) and FF99′ (strobe frequency approx. 30 Hz) or FF00′ (continuous light, no Strobe effect) and press [ENTER].

Operating mode `Automatic show’ (white LED model version)

This setting is only relevant if the device is not controlled via a DMX controller and not working as slave in a master / slave configuration. In this mode, the LEDs will gradually fade in with a freely selectable speed from blackout to maximum brightness and reverse, the Strobe effect is automatically engaged in regular intervals.
Press [MODE] repeatedly until AUTO’ appears in the display and press [ENTER]. Use [UP] and [DOWN] to select a value betweenAU00′ (minimum speed) and `AU99′ (maximum speed) and press [ENTER].

Wild Wash Pro 648 LED RGB DMX, Wild Wash Pro 648 LED White DMX, Wild Wash Pro 648 WW DMX
33

Operating

Operating mode `Automatic show’ (RGB LED model version)

This setting is only relevant if the device is not controlled via a DMX controller and not working as slave in a master / slave configuration. In this mode, the LEDs gradually change at freely selectable speed between the available colours, the Strobe effect is automatically engaged in regular intervals.
Press [MODE] repeatedly until AUTO’ appears in the display and press [ENTER]. Use [UP] and [DOWN] to select a value betweenAU00′ (minimum speed) and `AU99′ (maximum speed) and press [ENTER].

Operating mode `Sound control’

This setting is only relevant if the device is not controlled via a DMX controller and not working as slave in a master / slave configuration. In this mode, the LEDs are controlled via the built-in microphone.
Press [MODE] repeatedly until SOUN’ appears in the display and press [ENTER]. Use [UP] and [DOWN] to select the microphone sensitivity value betweenSO00′ (minimum sensitivity) and `SO99′ (maximum sensitivity) and press [ENTER].

LED spotlight
34

Operating mode `Slave’

Operating
This setting is only relevant if the device is not controlled via a DMX controller and working as slave in a master / slave configuration. Master and slave devices are connected to each other via a DMX cable, the master device is in one of the operating modes Manual control’,Fading’, Automatic show’ orSound control’. Press [MODE] repeatedly until `SLAV’ appears in the display and press [ENTER]. The slave device now copies exactly the actions of the master device.

Wild Wash Pro 648 LED RGB DMX, Wild Wash Pro 648 LED White DMX, Wild Wash Pro 648 WW DMX
35

Operating

xChx 1Ch 2Ch1 2Ch2 3Ch1 3Ch2 3Ch3 4Ch 6Ch

Axxx A001
A512

Cxxx C100 C199 C200 C299 C300 C399 CF00 CF99

CMxx CM01
CM15

MENU JUxx
JU00 JU99 JF00 JF99

FA xx FA00 FA99 FF01 FF99

AU TO AU00
AU99

SL AV

SOUN S000
S099

LED spotlight
36

7.4 Functions in DMX mode 1ch

Channel 1

Value Strobe 0 … 10 11 … 255

Function
LEDs off (blackout) Strobe effect, speed increasing from approx. 0 Hz to 30 Hz

Operating

Wild Wash Pro 648 LED RGB DMX, Wild Wash Pro 648 LED White DMX, Wild Wash Pro 648 WW DMX
37

Operating

7.5 Functions in DMX mode 2Ch (model version with white LEDs)

Channel 1 2

Value 0 … 255 Strobe 0 … 5 6 … 10 11 … 250 251 … 255

Function Dimmer (0 % to 100 %)
LEDs on LEDs off (blackout) Strobe effect, speed increasing from approx. 0 Hz to 30 Hz LEDs on

LED spotlight
38

7.6 Functions in DMX mode 2Ch1 (model version with RGB LEDs)

Channel 1 2

Value 0 … 255 Colour macro 0 … 5 6 … 13 14 … 21 22 … 29 30 … 37 38 … 45 46 … 53 54 … 61 62 … 69

Function Dimmer (0 % to 100 %)
LEDs off (blackout) Red Amber Warm yellow Yellow Green Turquoise Cyan Blue

Wild Wash Pro 648 LED RGB DMX, Wild Wash Pro 648 LED White DMX, Wild Wash Pro 648 WW DMX

Operating
39

Operating

Channel

Value 70 … 77 78 … 85 86 … 93 94 … 101 102 … 109 110 … 117 118 … 125 126 … 128 129 … 192 193 … 255

Function Lavender Mauve Magenta Pink Warm white White Cold white Ending colour change Colour change, increasing speed Gradual colour change, increasing speed

LED spotlight
40

7.7 Functions in DMX mode 2Ch2

Channel 1 2

Value 0 … 255 Strobe 0 … 5 6 … 10 11 … 250 251 … 255

Function Dimmer (0 % to 100 %)
LEDs on LEDs off (blackout) Strobe effect, speed increasing from approx. 0 Hz to 30 Hz LEDs on

Operating

Wild Wash Pro 648 LED RGB DMX, Wild Wash Pro 648 LED White DMX, Wild Wash Pro 648 WW DMX
41

Operating

7.8 Functions in DMX mode 3Ch1

Channel 1 2
3

Value 0 … 255 Strobe 0 … 5 6 … 10 11 … 250 251 … 255 Flash impulse 0 … 255

Function Dimmer (0 % to 100 %)
LEDs on LEDs off (blackout) Strobe effect, speed increasing from approx. 0 Hz to 30 Hz LEDs on
Flash impulse duration, increasing from 0 ms to 510 ms

LED spotlight
42

7.9 Functions in DMX mode 3Ch2 (model version with RGB LEDs)

Channel 1 2
3

Value 0 … 255 Strobe 0 … 5 6 … 10 11 … 250 251 … 255 Colour macro 0 … 5 6 … 13 14 … 21 22 … 29

Function Dimmer (0 % to 100 %)
LEDs on LEDs off (blackout) Strobe effect, speed increasing from approx. 0 Hz to 30 Hz LEDs on
LEDs off (blackout) Red Amber Warm yellow

Wild Wash Pro 648 LED RGB DMX, Wild Wash Pro 648 LED White DMX, Wild Wash Pro 648 WW DMX

Operating
43

Operating

Channel 44

Value 30 … 37 38 … 45 46 … 53 54 … 61 62 … 69 70 … 77 78 … 85 86 … 93 94 … 101 102 … 109 110 … 117 118 … 125 126 … 128

Function Yellow Green Turquoise Cyan Blue Lavender Mauve Magenta Pink Warm white White Cold white Ending colour change
LED spotlight

Channel

Value 129 … 192 193 … 255

Function Colour change, increasing speed Gradual colour change, increasing speed

Operating

Wild Wash Pro 648 LED RGB DMX, Wild Wash Pro 648 LED White DMX, Wild Wash Pro 648 WW DMX
45

Operating

7.10 Functions in DMX mode 3Ch2 (model version with white LEDs)

Channel 1 2

Value 0 … 255 Strobe 0 … 5 6 … 10 11 … 33 34 … 56 57 … 79 80 … 102 103 … 127 128 … 250 251 … 255

Function Dimmer (0 % to 100 %)
LEDs on, brightness controlled by channel 1 LEDs off (blackout) Random impulses, increasing speed Randomly increasing brightness, increasing speed Randomly decreasing brightness, increasing speed Random Strobe effect, increasing speed Interrupt effect, 5 s to 1 s Strobe effect, speed increasing from approx. 0 Hz to 30 Hz LEDs on, brightness controlled by channel 1

LED spotlight
46

Channel 3

Value Sound control 0 … 5 6 … 255

Function
Sound control off Sound control on, increasing sensitivity

7.11 Functions in DMX mode 3Ch3 (model version with RGB LEDs)

Channel 1 2 3

Value 0 … 255 0 … 255 0 … 255

Function Intensity red (0 % to 100 %) Intensity green (0 % to 100 %) Intensity blue (0 % to 100 %)

Operating

Wild Wash Pro 648 LED RGB DMX, Wild Wash Pro 648 LED White DMX, Wild Wash Pro 648 WW DMX
47

Operating

7.12 Functions in DMX mode 4Ch (model version with RGB LEDs)

Channel 1 2

Value 0 … 255 Strobe 0 … 5 6 … 10 11 … 33 34 … 56 57 … 79 80 … 102 103 … 127 128 … 250 251 … 255

Function Dimmer (0 % to 100 %)
LEDs on, brightness controlled by channel 1 LEDs off (blackout) Random impulses, increasing speed Randomly increasing brightness, increasing speed Randomly decreasing brightness, increasing speed Random Strobe effect, increasing speed Interrupt effect, 5 s to 1 s Strobe effect, speed increasing from approx. 0 Hz to 30 Hz LEDs on, brightness controlled by channel 1

LED spotlight
48

Operating

Channel 3

Value Colour macro 0 … 5 6 … 13 14 … 21 22 … 29 30 … 37 38 … 45 46 … 53 54 … 61 62 … 69 70 … 77 78 … 85 86 … 93

Function
LEDs off (blackout) Red Amber Warm yellow Yellow Green Turquoise Cyan Blue Lavender Mauve Magenta

Wild Wash Pro 648 LED RGB DMX, Wild Wash Pro 648 LED White DMX, Wild Wash Pro 648 WW DMX
49

Operating

Channel 4

Value 94 … 101 102 … 109 110 … 117 118 … 125 126 … 128 129 … 192 193 … 255 Sound control 0 … 5 6 … 255

Function Pink Warm white White Cold white Ending colour change Colour change, increasing speed Gradual colour change, increasing speed
Sound control off Sound control on, increasing sensitivity

LED spotlight
50

7.13 Functions in DMX mode 5Ch (model version with white LEDs)

Channel 1 2

Value 0 … 255 Strobe 0 … 5 6 … 10 11 … 33 34 … 56 57 … 79 80 … 102 103 … 127 128 … 250 251 … 255

Function Dimmer (0 % to 100 %)
LEDs on, brightness controlled by channel 1 LEDs off (blackout) Random impulses, increasing speed Randomly increasing brightness, increasing speed Randomly decreasing brightness, increasing speed Random Strobe effect, increasing speed Interrupt effect, 5 s to 1 s Strobe effect, speed increasing from approx. 0 Hz to 30 Hz LEDs on, brightness controlled by channel 1

Wild Wash Pro 648 LED RGB DMX, Wild Wash Pro 648 LED White DMX, Wild Wash Pro 648 WW DMX

Operating
51

Operating

Channel 3
4 5

Value

Function

Strobe programmes

0 … 5

No function

11 … 255

Automatic Strobe programmes with alternating segments

Running speed

11 … 255

Automatic Strobe programme speed, increasing if channel 5 = 0…5)

Sound control

0 … 5

Sound control off

6 … 255

Sound control on, increasing sensitivity

LED spotlight
52

7.14 Functions in DMX mode 6Ch (model version with RGB LEDs)

Channel 1 2

Value 0 … 255 Strobe 0 … 5 6 … 10 11 … 33 34 … 56 57 … 79 80 … 102 103 … 127 128 … 250 251 … 255

Function Dimmer (0 % to 100 %)
LEDs on, brightness controlled by channel 1 LEDs off (blackout) Random impulses, increasing speed Randomly increasing brightness, increasing speed Randomly decreasing brightness, increasing speed Random Strobe effect, increasing speed Interrupt effect, 5 s to 1 s Strobe effect, speed increasing from approx. 0 Hz to 30 Hz LEDs on, brightness controlled by channel 1

Wild Wash Pro 648 LED RGB DMX, Wild Wash Pro 648 LED White DMX, Wild Wash Pro 648 WW DMX

Operating
53

Operating

Channel 3 4 5 6

Value 0 … 255 0 … 255 0 … 255 Sound control 0 … 5 6 … 255

Function Intensity red (0 % to 100 %) Intensity green (0 % to 100 %) Intensity blue (0 % to 100 %)
Sound control off Sound control on, increasing sensitivity

LED spotlight
54

7.15 Functions in DMX mode 7Ch (model version with 648 white LEDs)

Channel 1 2
3 4 5

Value 0 … 255 Strobe 0 … 5 6 … 10 11 … 250 251 … 255 Flash impulse 0 … 255 0 … 255 0 … 255

Function Dimmer (0 % to 100 %)
LEDs on LEDs off (blackout) Strobe effect, speed increasing from approx. 0 Hz to 30 Hz LEDs on
Flash impulse duration, increasing from 0 ms to 510 ms Brightness of LED segment 1 (0 % to 100 %) Brightness of LED segment 2 (0 % to 100 %)

Operating

Wild Wash Pro 648 LED RGB DMX, Wild Wash Pro 648 LED White DMX, Wild Wash Pro 648 WW DMX
55

Operating

Channel 6 7

Value 0 … 255 0 … 255

Function Brightness of LED segment 3 (0 % to 100 %) Brightness of LED segment 4 (0 % to 100 %)

LED spotlight
56

Technical specifications

8 Technical specifications

Stairville Wild Wash Pro 648 LED RGB DMX (item no. 432585)

255 mm

95 mm

385 mm

Light source Optical properties Control Number of DMX channels Input connections

Output connections

648 × tricolour SMD LEDs, 0.2 W each

Beam angle

approx. 75°

DMX, buttons and display on the unit

1, 2, 3, 4 or 6

Voltage supply

Lockable input socket (Power Twist)

DMX control

XLR chassis plug, 3-pin XLR chassis plug, 5-pin

Voltage supply

Lockable output socket (Power Twist)
Output current 16 A max.

Wild Wash Pro 648 LED RGB DMX, Wild Wash Pro 648 LED White DMX, Wild Wash Pro 648 WW DMX
57

Technical specifications

Power consumption Operating supply voltage Fuse Protection class Mounting options Dimensions (W × H × D) Weight Ambient conditions

DMX control

XLR chassis socket, 3-pin XLR chassis socket, 5-pin

130 W

100 – 240 V 50/60 Hz

5 mm × 20 mm, 2 A, 250 V, fast-acting

IP20

hanging, standing

385 mm× 255 mm× 95 mm

3.25 kg

Temperature range

0 °C…40 °C

Relative humidity

20 %…80 % (non-con- densing)

LED spotlight
58

Further information

Outdoor capable Colour mixture LED type Floor housing Fanless Remote control wireless DMX Housing colour

No RGB SMD No No Not possible No black

Technical specifications

Wild Wash Pro 648 LED RGB DMX, Wild Wash Pro 648 LED White DMX, Wild Wash Pro 648 WW DMX
59

Technical specifications

Stairville Wild Wash 648 LED White DMX (item no. 432586)

95 mm

385 mm

255 mm

Light source Light source properties
Optical properties Control Number of DMX channels Input connections
Output connections

648 × SMD LEDs, cold white, 0.2 W each

Colour temperature

6000 K

Colour rendering index

CRI 75

Beam angle

approx. 75°

DMX, buttons and display on the unit

1, 2, 3, 5 or 7

Voltage supply

Lockable input socket (Power Twist)

DMX control

XLR chassis plug, 3-pin XLR chassis plug, 5-pin

Voltage supply

Lockable output socket (Power Twist)
Output current 16 A max.

LED spotlight
60

Technical specifications

Power consumption Operating supply voltage Fuse Protection class Mounting options Dimensions (W × H × D) Weight Ambient conditions

DMX control

XLR chassis socket, 3-pin XLR chassis socket, 5-pin

130 W

100 – 240 V 50/60 Hz

5 mm × 20 mm, 2 A, 250 V, fast-acting

IP20

hanging, standing

385 mm× 255 mm× 95 mm

3.25 kg

Temperature range

0 °C…40 °C

Relative humidity

50 %, non-condensing

Wild Wash Pro 648 LED RGB DMX, Wild Wash Pro 648 LED White DMX, Wild Wash Pro 648 WW DMX
61

Technical specifications
Further information Outdoor capable Colour mixture LED type Floor housing Fanless Remote control wireless DMX Housing colour

No Cold white SMD No No Not possible No black

LED spotlight
62

Technical specifications

Stairville Wild Wash 648 WW DMX (item no. 481229)

95 mm

385 mm

255 mm

Light source Light source properties
Optical properties Control Number of DMX channels Input connections
Output connections

648 × SMD LEDs, warm white, 0.2 W each

Colour temperature

2900 K

Colour rendering index

CRI Ra >90

Beam angle

approx. 75°

DMX, buttons and display on the unit

1, 2, 3, 5 or 7

Voltage supply

Lockable input socket (Power Twist)

DMX control

XLR chassis plug, 3-pin XLR chassis plug, 5-pin

Voltage supply

Lockable output socket (Power Twist)
Output current 16 A max.

Wild Wash Pro 648 LED RGB DMX, Wild Wash Pro 648 LED White DMX, Wild Wash Pro 648 WW DMX
63

Technical specifications

Power consumption Operating supply voltage Fuse Protection class Mounting options Dimensions (W × H × D) Weight Ambient conditions

DMX control

XLR chassis socket, 3-pin XLR chassis socket, 5-pin

130 W

100 – 240 V 50/60 Hz

5 mm × 20 mm, 2 A, 250 V, fast-acting

IP20

hanging, standing

385 mm× 255 mm× 95 mm

3.25 kg

Temperature range

0 °C…40 °C

Relative humidity

50 %, non-condensing

LED spotlight
64

Further information Outdoor capable Colour mixture LED type Floor housing Fanless Remote control wireless DMX Housing colour

No Warm white SMD No No Not possible No black

Technical specifications

Wild Wash Pro 648 LED RGB DMX, Wild Wash Pro 648 LED White DMX, Wild Wash Pro 648 WW DMX
65

Plug and connection assignment

9 Plug and connection assignment

Introduction

This chapter will help you select the right cables and plugs to connect your valuable equip- ment so that a perfect light experience is guaranteed.
Please take our tips, because especially in Sound & Light’ caution is indicated: Even if a plug fits into a socket, the result of an incorrect connection may be a destroyed DMX controller, a short circuit orjust’ a not working light show!

DMX connections

The unit offers a 3-pin XLR socket for DMX output and a 3-pin XLR plug for DMX input. Please refer to the drawing and table below for the pin assignment of a suitable XLR plug.

Pin Configuration

1

Ground, shielding

2

Signal inverted (DMX, `cold signal’)

3

Signal (DMX+, `hot signal’)

LED spotlight
66

DMX connections

Plug and connection assignment

A five-pin XLR socket serves as DMX output, a five-pin XLR plug serves as DMX input. The drawing below and the table show the pin assignment of a matching coupling.

Pin Assignment

1

Ground (shielding)

2

Signal inverted (DMX, `cold’)

3

Signal (DMX+, `hot’)

4

unused / second connection (DMX)

5

unused / second connection (DMX+)

Wild Wash Pro 648 LED RGB DMX, Wild Wash Pro 648 LED White DMX, Wild Wash Pro 648 WW DMX
67

Troubleshooting

10 Troubleshooting
NOTICE! Possible data transmission errors For error-free operation make use of dedicated DMX cables and do not use ordi- nary microphone cables. Never connect the DMX input or output to audio devices such as mixers or ampli- fiers.
In the following we list a few common problems that may occur during operation. We give you some suggestions for easy troubleshooting:
LED spotlight
68

Troubleshooting

Symptom
The unit does not work, no light, the display is dark
Apparently no function despite proper power supply
No response to the DMX con- troller

Remedy
Check the mains connection and the main fuse.
Check if the unit is in DMX mode or in `slave’ mode. If so, check the unit in another mode.
1. Check whether the DMX controller is switched on. Check the DMX connectors and cables for proper con- nection.
2. Check the address settings and the DMX polarity.
3. Try using another DMX controller.
4. Check whether the DMX cables run near or parallel to high-voltage cables that may cause damage or interfer- ence to a DMX interface circuit.

If the procedures recommended above do not succeed, please contact our Service Center. You can find the contact information at www.thomann.de.

Wild Wash Pro 648 LED RGB DMX, Wild Wash Pro 648 LED White DMX, Wild Wash Pro 648 WW DMX
69

Cleaning

11 Cleaning
Optical lenses
Fan grids

Clean the optical lenses, that are accessible from the outside, regularly in order to optimize the light output. The frequency of cleaning depends on the operating environment: wet, smoky or particularly dirty surroundings can cause more accumulation of dirt on the optics of the device.
n Clean with a soft cloth using our lamp and lens cleaner (item no. 280122). n Always dry the parts carefully.
The fan grids of the device must be cleaned of any contamination, such as dust, etc. on a reg- ular basis. Before cleaning, switch off the device and disconnect mains-operated devices from the mains. Only use pH-neutral, solvent-free and non-abrasive cleaning agents. Clean the unit with a slightly damp lint-free cloth.

LED spotlight
70

Protecting the environment

12 Protecting the environment

Disposal of the packaging mate- rial

For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling.
Ensure that plastic bags, packaging, etc. are properly disposed of.
Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.

Disposal of your old device

This product is subject to the European Waste Electrical and Electronic Equipment Directive (WEEE) in its currently valid version. Do not dispose with your normal household waste.
Dispose of this device through an approved waste disposal firm or through your local waste facility. When discarding the device, comply with the rules and regulations that apply in your country. If in doubt, consult your local waste disposal facility.

Wild Wash Pro 648 LED RGB DMX, Wild Wash Pro 648 LED White DMX, Wild Wash Pro 648 WW DMX
71

Notes
LED spotlight
72

Notes
Wild Wash Pro 648 LED RGB DMX, Wild Wash Pro 648 LED White DMX, Wild Wash Pro 648 WW DMX
73

Notes
LED spotlight
74

Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.de