Jandy LENSCVRW Nicheless LED Underwater Light Instruction Manual
- June 10, 2024
- Jandy
Table of Contents
Jandy LENSCVRW Nicheless LED Underwater Light
The Nicheless LED Underwater Light is an accessory for Jandy Pro Series pool products. It comes with three lens cover kit options: White (LENSCVRW), Gray (LENSCVRG), and Black (LENSCVRB).
PRODUCT Package Contents
The Nicheless LED Underwater Light package includes:
- Four Quarter Moon Lens Covers
- Four Half Moon Lens Covers
- Installation Tool
PRODUCT Installation
- Using the installation tool, tighten the light all the way until the tool’s handle is pointing directly straight up and down.
- Unscrew the light turning 2 revolutions (720 degree rotation), so that the handle ends in the same upright position.
- Snap on the lens cover.
- Using the installation tool, screw the light back into its original position with the half or quarter moon centered at the top of the light.
Note: Try different lens covers (half moon or quarter moon) to achieve the most ideal effect.
Important Safety Instructions
Read and follow all instructions provided in the manual before installing the Nicheless LED Underwater Light. If any parts are missing or incorrect, contact your local distributor or Zodiac Pool Systems technical support at 1-800-822-7933 for assistance.
Accessory Instructions
These Instructions are to be used on Jandy Pro Series accessories:
- LENSCVRW: WHITE LENS COVER KIT
- LENSCVRG: GRAY LENS COVER KIT
- LENSCVRB: BLACK LENS COVER KIT
WARNING
FOR YOUR SAFETY
This product must be installed and serviced by a contractor who is licensed and qualified in pool equipment by the jurisdiction in which the product will be installed, where such state or local requirements exist. In the event no such state or local requirement exists, the maintainer must be a professional with sufficient experience in pool equipment installation and maintenance, so that all of the instructions in this manual can be followed exactly. Before installing this product, read and follow all warning notices and instructions that accompany this product. Failure to follow warning notices and instructions may result in property damage, personal injury, or death. Improper installation and/or operation will void the warranty. Improper installation and/or operation can create an unwanted electrical hazard which can cause serious injury, property damage, or death.
Important Safety Instructions
READ AND FOLLOW ALL INSTRUCTIONS
Package Contents
Before starting, check that you have the correct parts as indicated below. If any parts are missing or incorrect, please call your local distributor or Zodiac Pool Systems technical support at 1-800-822-7933 for assistance.
Item | Description | Contents (Qty) |
---|
LENSCVRW
|
White Lens Cover Kit
| White Quarter Moon Lens Covers (4) White Half Moon Lens Covers (4) Installation Tool
LENSCVRG
|
Gray Lens Cover Kit
| Gray Quarter Moon Lens Covers (4) Gray Half Moon Lens Covers (4) Installation Tool
LENSCVRB
|
Black Lens Cover Kit
| Black Quarter Moon Lens Covers (4) Black Half Moon Lens Covers (4) Installation Tool
Installation
- Using the installation tool, tighten the light all of the way until the tool’s handle is pointing directly straight up and down.
- Unscrew the light turning 2 revolutions (720-degree rotation), so that the handle ends in the same upright position.
- Snap on the lens cover.
- Using the installation tool, screw the light back into it’s original position with the half or quarter moon centered at the top of the light.
TIP: Try different lens covers (half moon or quarter moon) to achieve the most ideal effect.
CONTACTS
Zodiac Pool Systems LLC
- 2620 Commerce Way, Vista, CA 92081
- 1.800.822.7933
- www.ZodiacPoolSystems.com
Zodiac Pool Systems Canada, Inc.
- 2115 South Service Road West, Unit 3 Oakville, ON L6L 5W2
- 1.888.647.4004
- www.ZodiacPoolSystems.ca
ZODIAC® is a registered trademark of Zodiac International, S.A.S.U., used under license.All other trademarks referenced herein are the property of their respective owners.
©2018 Zodiac Pool Systems LLC H0643800_REVB