Danfoss Aero RA Series Click Thermostatic Sensors Installation Guide
- June 10, 2024
- Danfoss
Table of Contents
Danfoss Aero RA Series Click Thermostatic Sensors
Product Information:
The product is a device with a code number 013G1246 or 013G1236 or 013G5245 and a blind mark as indicated on the user manual. The maximum value for the device can be set to 4, and the minimum value can be set to 2.
Product Usage Instructions:
- Start the installation process by following the steps outlined in the installation guide.
- Once the device is installed, set the maximum value to 4 by inputting “MAX = 4” into the device.
- Similarly, set the minimum value to 2 by inputting “MIN = 2” into the device.
- The code number for the device can be found on the user manual, and it is recommended to keep this information for future reference.
Please note that any other specific instructions or details regarding the usage of the device may be available in the full user manual, which is not provided in this text-extract. For further assistance, please contact customer support.
Installation
BIV Installation
Uninstall
Temperature Limitation
Code no. | |
---|---|
**** | **** |
013G1246
|
013G1236
Theft protection
Code no. | |
---|---|
**** | **** |
013G5245
|
013G1236
Theft protection (Removal)
Blind mark
© Danfoss Climate Solutions | 2023.03
Danfoss A/S
Climate Solutions
danfoss.com
+45 7488 2222
Any information, including, but not limited to information on the selection of
the product, its application or use, product design, weight, dimensions,
capacity or any other technical data in product manuals, catalogs
descriptions, advertisements, etc., and whether made available in writing,
orally, electronically, online or via download, shall be considered
informative and is only binding if and to the extent, explicit reference is
made in a quotation or order confirmation. Danfos cannot accept any
responsibility for possible errors in catalogs, brochures, videos and other
material.
Danfoss reserves the right to alter its products without notice. This also
applies to products ordered but not delivered provided that such alterations
can be made without changes to the form, fit, or function of the product.
All trademarks in this material are property of Danfoss A/S or Danfoss group
companies. Danfoss and the Danfoss logo are trademarks of Danfoss A/S. All
rights reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>