SYLVANIA SDVD1256-C 11.6 Inch Portable Dvd Player User Manual

SYLVANIA SDVD1256-C 11.6 Inch Portable Dvd Player

READ THESE INSTRUCTIONS BEFORE USE AND RETAIN FOR FUTURE REFERENCE.

Product Information

The Swivel Portable DVD Player Model SDVD1256-C is a compact and portable device designed for entertainment on the go. It features a 11.6 inch LCD swivel screen, built-in speakers, and a rechargeable battery. The DVD player supports various disc formats including CD, DVD, DVD+/-R/RW, and CD-R/RW. It also has a USB port and SD card reader for playing media files from external devices.

Safety Instructions

• Do not open the device as there are no user-serviceable parts inside. Refer servicing to qualified service personnel.
• Avoid exposing the device to rain or moisture to reduce the risk of fire or electric shock.
• Use only recommended accessories to prevent annoying interference and reduce the risk of fire or electric shock.
• Use a surge protector for AC connection to protect against lightning and power surges.
• This device emits invisible and hazardous laser radiation when open and the interlock failed or defeated. Avoid direct exposure to the beam.
• Keep the device away from heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.
• Do not defeat the safety purpose of the polarized or grounding-type plug. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
• Read all safety and operating instructions carefully before using the device. Heed all warnings on the product and in the operating instructions.
• Use under supervision of an adult due to a long cord that can easily be tripped on or pulled on, causing injury. Make sure it is arranged so it will not drape over a tabletop or where it can be pulled on by children or tripped over accidentally.
• Exercise caution as the unit has sharp points.

Product Usage

1. Ensure the device is charged before use by plugging it into a power outlet using the provided AC adapter.
2. To play a disc, insert it into the disc slot on the right side of the device. The disc will start playing automatically.
3. To play media files from an external device, plug in a USB drive or insert an SD card into the corresponding slot on the left side of the device. Use the arrow buttons on the remote control or on the device itself to navigate through your media files and select the one you want to play.
4. Adjust the volume and screen brightness using the buttons on the device or remote control.
5. To swivel the screen, gently push it to the left or right until it clicks into place at your desired angle.
6. Connect headphones or external speakers using the headphone jack or AV output port on the right side of the device.
7. To turn off the device, press and hold the power button until the screen goes black.

IMPORTANT SAFETY INSTRUCTION

CAUTION

• RISK OF ELECTRIC SHOCK
• DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER- SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

• THIS DIGITAL VIDEO DISC PLAYER EMPLOYS A LASER SYSTEM. TO ENSURE PROPER USE OF THIS PRODUCT.
• PLEASE READ THIS OWNER’S MANUAL CAREFULLY AND RETAIN FOR FUTURE REFERENCE. SHOULD THE UNIT REQUIRE MAINTENANCE, CONT ACT AN AUTHORIZED SERVICE LOCATION-SEE SERVICE PROCEDURE.
• USE CONTROLS, ADJUSTMENTS OR THE PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
• TO PREVENT DIRECT EXPOSURE TO LASER BEAM, DO NOT TRY TO OPEN THE ENCLOSURE. VISIBLE LASER RADIATION MAY BE PRESENT WHEN THE
• ENCLOSURE IS OPENED. DO NOT STARE INTO BEAM.

WARNING

• TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
• TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, AND ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY.

SURGE PROTECTORS

• It is recommended to use a surge protector for AC connection. Lightning and power surges NOT covered under warranty for this product.

INDUSTRY CANADA CONFORMITY

CAN ICES-3

• The lightning flash with arrow head symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product`s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
• The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance(servicing) instructions in the literature accompanying the appliance.

DANGER: Invisible and hazardous laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam.

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not Installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC WARNING: To assure continued compliance, follow the attached installation instructions and use only shielded cables when connecting to other devices. Modifications not authorized by the manufacturer may void user`s authority to operate this device.

WARNING: USE UNDER SUPERVISION OF AN ADULT DUE TO LONG CORD

This unit has a long AC cord or other long cord that can easily be tripped on or pulled on, causing injury, Please make sure it is arranged so it will not drape over a tabletop, etc. Where it can be pulled on by children or tripped over accidentally. EXERCISE CAUTION AS UNIT HAS SHARP POINTS.

Before using the unit, be sure to read all operating instructions carefully. Please note that these are general precautions and may not pertain to your unit.

instructions

1. Read these instructions.
   • All the safety and operating instructions should be read before the product is operated.
2. Keep these instructions.
   • The safety and operating instructions should be retained for future reference.
3. Heed all warnings.
   • All warnings on the product and in the operating instructions should be adhered to.
4. Follow all instructions.
   • All operating and use instructions should be followed.
5. Do not use this apparatus near water.
   • Do not use this product near water and moisture, for example: near a bathtub, washbowl, kitchen sink or laundry tub; in a wet basement; or near a swimming pool.
6. Clean only with dry cloth.
   • Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a dry cloth for cleaning.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Slots and openings in the cabinet and in the back or bottom are provided for ventilation, to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug or another similar surface. This product should never be placed near or over a radiator or heat source. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.
8. Do not install near any heat souræs such as radiators, heat registers, stoves, or other apparatus(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, converuenæ receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. An appliance and cart combination should be moved with care. Quick stop, excessive force and uneven surfaces may cause the appliance and cart combination to overturn.
13. Unplug this apparatus during lightning storms or when unused for long periods of time. To protect your product from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as powersupply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture does not operate normally, or has been dropped.
15. Power source.
    • This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For products intended to operate from battery power, or other source, refer to the operation instructions.
16. Power lines
    • An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
17. Overloading
    • Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.
18. Object and liquid entry
    • Never push objects of any kind into the product through openings as they may touch dangerous voltage points or short out parts that could result in fire or electric shock. Never spill or spray any type of liquid on the product.
19. Outdoor antenna grounding
    • If an outside antenna is connected to the product, be sure the antenna system is grounded so as to Provide some protection against voltage surges and built up static charges. Section 810 of the National Electric Code ANSI/NFPA 70 provides information with respect to proper to grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge product, size of grounding conductors, location of antenna discharge product, connection to grounding electrodes and requirements for the grounding electrodes.
20. Service
    • Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
21. Replacement parts
    • When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original parts. Unauthorized substitutions may result in fire or electric shock or other hazards.
22. Safety check
    • Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operational condition.
23. Wall or ceiling mounting
    • The product should be mounted to a wall or ceiling only as recommended by the manufacturer.
24. Damage requiring service
    • Unplug this product from the wall outlet and refer service to qualified service personnel under the following conditions.
    • When the power-supply cord or plug is damaged.
    • If liquid has been spilled or objects have fallen into the product.
    • If the product has been exposed to rain or water.
    • If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as an adjustment of other controls may result in damage and will and require extensive work by a qualified technician to restore in the product to its normal operation.
    • If the product has been dropped or the cabinet has been damaged.
    • When the product exhibits a distinct change in performance-this indicates a need for service.
25. Note to CATV system installer
    • This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

NOTE: Refer all servicing to qualified service personnel Servicing is required when the unit has been damaged in any way such as the following: the power-supply or plug has been damaged, liquid has been spilled into unit, the unit has been exposed to rain or moisture, the unit has been dropped or the unit does not operate normally.

NOTES ON HANDLING

• When shipping the unit, always use the original shipping carton and packing materials. For maximum protection, repack the unit as it was originally packed at the factory.
• Do not use volatile liquids, such as insect spray, near the unit. Do not leave rubber or plastic products in contact with the unit for a long time. They will leave marks on the finish.
• The top and rear panels of the unit may become warm after a long period of use. This is normal and not a malfunction.
• When the DVD player is not in use, be sure to remove the disc and turn off the power.

NOTES ON LOCATING THE DVD PLAYER

• When you place this unit near a TV, radio or VCR, the playback picture may become poor and the sound may be distorted. In this case, move the unit away from the TV, radio or VCR.

NOTES ON CLEANING

Use a soft, dry cloth for cleaning

• For stubborn dirt, soak the cloth in a weak detergent solution, wring well and wipe. Use a dry cloth to wipe it dry. Do not use any type of solvent, such as thinner and benzene, as they may damage the surface of the unit.
• If you use a chemical-saturated cloth to clean the unit, follow that product’s instructions.

_ Warning: _Cleaning and adjustment of lenses and /or other components of playback mechanism should be performed by a qualified service technician.

NOTES ON MOISTURE CONDENSATION

Moisture condensation damages the DVD player. Please read the following carefully.

• Moisture condensation occurs, for example, when you pour a cold drink into a glass on a warm day. Drops of water form on the outside of the glass. In the same way, moisture may condense on the optical pick-up lens inside this unit, one of the most crucial internal parts of the DVD player.

Moisture condensation occurs during the following cases

• When you bring the DVD player directly from a cold place to a warm place.
• When you use the DVD player in a room where you just turned on the heater, or a place where the cold wind from the air conditioner directly hits the unit.
• In summer, when you use the DVD player in a hot and humid place just after you moved the unit from an air conditioned room.
• When you use the DVD player in a humid place.

Do not use the DVD player when moisture condensation may occur

• If you use the DVD player in such a situation, it may damage discs and internal parts. Remove the disc, connect the AC/DC Adaptor to the DVD player and the wall outlet, turn on the DVD player and leave it ON for two or three hours. After two or three hours, the DVD player will have warmed up and evaporated any moisture.

ABOUT DISCS

The region number for this DVD Player is: 1
See the following page for information regarding region numbers.

PLAYABLE DISCS

The following discs can be played back on this DVD player:

DISC TYPES: DVD

Data on most DVDs is divided into sections called titles and then into subsections called chapters, each of which is given a title or chapter number. Some features of this DVD player will not operate with some DVD discs as they are preset. If a function you selected does not run as desired , refer to the manual accompanying the DVD disc.

AUDIO CD

• Data on an audio CD is divided into sections called tracks , each of which is given a track number.

IMPORTANT

It is important that you read the manual that accompanies the DVD disc , as there are features that are on the DVD player that cannot be used with certain DVDs . There are also extra features on the DVD disc that are different for each DVD disc, so they are not explained in this owner’s manual. This player conforms to the NTSC and PAL color systems. However, if you are in the USA, Canada or Mexico,leave this setting on NTSC. If incorrectly set to PAL ,the TV picture may roll vertically. In this case , set the TV system to NTSC.

Notes on Copyright

It is forbidden by law to copy, broadcast, show, broadcast on cable, play in public and rent copyrighted material without permission. DVD video discs are copy-protected, and any recordings made from these discs will be distorted. This product incorporates copyright protection technology that is protected by method claims of certain U.S. Patents and other intellectual property rights owned by Macrovision Macrovision Corporation, and is intended for home and other limited viewing uses only, unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

Region Management Information

This DVD Player is designed and manufactured to respond to the Region Management Information that is recorded on a DVD disc. If the Region number described on the DVD disc does not correspond to the Region number of this DVD player, this DVD player cannot play that disc. You may not be able to play back some DVD video discs on this player if they were purchased from outside your geographic area or made for business purposes. When you try to play back an unauthorized disc, Wrong Region appears on the TV screen.

LOCATION OF CONTROLS

1. DVD/USB/CARD button: When USB device and/or SD Card was inserted, press to select the playback source as desired.
2. VOL- (Volume Down) button: Press to decrease volume level.
3. VOL+ (Volume Up) button: Press to increase volume level.
4. OPEN button: Push the”OPEN” button to the disc
5. SOURCE button: Press to enter to AV IN mode; press again to resume normal mode.
6. Fast Backward/Left button: Press to fast backward or cursor left.
7. OK button: Press to confirm the operations.
8. Next/ Down button: Press to skip to next track or cursor downward.
9. Fast forward/Right button: Press to fast forward or cursor right.
10. Play/Pause/STOP button: Press to start playback or pause, press and hold about 3 seconds to pre-stop, press and hold 3 seconds again to fully stop.
11. Previous/Up button: Press to skip to previous track or cursor upward.
    • Right Side View
12. USB Port
13. MMC/SD Slot
14. EARPHONE Jack
15. AV OUT Jack
16. AV IN Jack
17. Power OFF/ON Switch: Slide to ON position to power on. Slide to OFF position to shut off.
18. DC IN Jack: DC input jack (DC 9-12V, 1A )
    • Front Side View
19. POWER/CHARGE Indicator
20. Remote Sensor

REMOTE CONTROL

1. POWER Button
2. VOLUME +1- Buttons
3. MUTE Button
4. MENU Button
5. Direction Buttons
6. Button
7. Button
8. (Play/Pause) Button
9. USB/CARD Button
10. TITLE Button
11. (STOP) Button
12. AUDIO Button
13. GOTO Button
14. REPEAT Button
15. SLOW Button
16. LCD ONIOFF Button
17. Numeric Buttons
18. SETUP Button
19. Button
20. Button
21. OSD (On-Screen Display) Button
22. SUBTITLE Button
23. ANGLE Button
24. PROG (Program) Button
25. 0K Button
26. STEP Button
27. ZOOM Button
28. A-B Repeat Button

BATTERY INSTALLATION

(REMOTE CONTROL)

Battery installation

1. Press the tabs on the battery door and lift it off.
2. Install two (2) x AAA size batteries into the battery compartment as the figure on righ and the polarity markings inside battery compartment.
3. Replace the battery door.

BATTERY PRECAUTIONS

Follow these precautions when using a battery in this device:

1. Use only the size end type of battery specified.
2. Be sure to follow the correct polarity when installing the battery as indicated in the battery compartment. A reversed battery may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with fresh ones.
4. If the batteries in the device are consumed or the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.
5. Do not try to recharge the battery not intended to be recharged; it can overheat and rupture. (Follow battery manufacturer’s directions.)
6. Do not dispose of battery in fire. Battery may explodes or leak.
7. Clean the battery contacts and also those of the device prior to battery installation.

Remote Control Sensor

Remarks

1. When there is an obstacle between the unit and the transmitter, the transmitter may not operation.
2. When direct sunlight, an incandescent lamp, fluorescent lamp or any other strong light shines on the remote control of the unit, the remote operation may be unstable.

POWER SOURCE

The unit has a built-in DC 7.4V Lithium-ion rechargeable battery. Recharge it as follows:

Charging by supplied AC/DC Adaptor:

1. Connect the small plug from the supplied ACIDC Adaptor to the DC IN Jack on the right of unit.
2. Connect the ACIDC Adaptor to the wall outlet having AC 100-240V—; 50/60Hz.
3. During charging, the Red Indicator will turn on. When finished, it will turn off.

_ NB: _The ACIDC Adaptor is intended to be correctly orientated in a vertical or floor mount position.

Notes: Your battery will last longer if you follow these simple guidelines for caring for and storing it.

• Recharge and store the device within the temperature range of 50C—350C (400F—950F).
• Do not overcharge (longer than 24 hours). Excessive charging or discharging may shorten the battery’s life.
• Battery life naturally shortens slowly over time.

Charging by the supplied Car Adaptor

1. Connect to the cigarette lighter socket of a vehicle that has a 12V battery as the figure below. It is NOT compatible with a vehicle that has a 24V battery.
2. This is a special negative grounded Car Adapter. Using this Car Adapter with a plus grounded car can cause malfunction.
3. Do NOT plug in the Car Adapter until the car ignition is turned on.
4. Disconnect the Car Adapter from the cigarette ligher and the unit after use.

CONNECTIONS

1. Connecting to a TV or Video Player (such like DVD; VCR; or DVR Players … ) with an AV connection cable.

NOTE

• The default setting of the unit is AV Out, if connect to external Video to turn back to AV Out mode. Player (such like DVD; VCR; DVR Players … ), press the MODE Button to set to AV IN mode (“AV IN” will appear on the screen). Press again
• Using the earphone to listen privately.

OPERATIONS

1. Lift up the panel and turn to angle. Slide the Power ON/OFF switch to “ON” to gx»wer on the unit, the Græn Indicator on front of the player will light.
2. Push OPEN Switch to the disc door. Place the disc on the center spindle with label side facing up. Close the disc door and the player will start playback automatically.
3. During playback:
   • Press the or Buttons to fast search for a section forward/backward.
   • Press Play Button to resume normal playback.
   • Press the or Buttons repeatedly to skip to track.
   • Press Button to pause, and press the Button again to resume normal playback.
   • Press the VOL (Volume) +1- Buttons to adjust volume level.
   • Press and hold the STOP Button about 3 seconds to stop playback. The player will the point where disc was stopped. When press Play/Pause Button again, playback will start from this
   • To stop playback completely or to start from press and hold the STOP Button again about 3 seconds.
4. To power off, press the POWER Button on the Remote Control to turn the player to standby mode. Press the POWER Button again to turn the player on from standby mode. (For saving energy, always power off the player by slide the Power ON/OFF Switch on the player to OFF position or unplug the AC/DC Adaptor from player and wall outlet.)

Repeat Playback: (DVD)

• During playback, press the REPEAT button once; Chapter will playback.
• Press the REPEAT button twice; Title ” will appear on the screen then the current Title will playback.
• Press the REPEAT button the third time; ” All ” will appear on the screen then all files will playback.
• Press the REPEAT button repeatedly until all the repeat indicators disappear on the screen to turn off the the repeat mode.

Repeat Playback: (CD)

• During playback, press the REPEAT Button once; Track ” will on the screen then the current playing track will playback.
• Press the REPEAT Button twice; ALL ” will on the screen then all the tracks on the disc will playback.
• Press the REPEAT Button repeatedly until all repeat indicators on the screen to tum off repeat mode.

(CD/DVD)Program

1. During CD or DVD playback, press the PROG ( Program ) button.
2. Using the Direction and Numeric Buttons to select and set the desired TT (Title), CH (Chapters), tracks (for CD) of the movie (music) you wants. The Program menu will appear as follows.
3. Using the Direction Button to select and highlight the “START” Button on the screen then press the 0K Button to start program playback.

OPERATIONS

LCD ON/OFF

• Press to tum on or off the LCD display.

POWER

• Press to tum to standby mixie. Press again to tum on.

VOL/Volume +/-

• Press to increase or volume.

MUTE

• Press to turn off the sound, press again to resume.

MENU

• Press to retum to disc’s menu page (Function depends on the of the disc). OSD (On Scræn Display)
• During playback, press the OSD button to read the information of playback status.

SUBTITLE

• During DVD playback, press repeatedly to select the desired subtitle (Function on the recording of disc).

STEP

• During movie playback, press STEP Button repeatedly to play the movie frame by frame.
• Press the Play/Pause Button to resume normal playback.

TITLE

• Press to return to disc’s title (Function on the of the disc).

ANGLE

• Press to turn off the sound, press again to resume. (Function depends on the recording of During DVD playback, press repeatedly to select the viewing angle disc).

AUDIO

• During DVD playback, press repeatedly to select the desired language (Function depends on the recording of disc).

GOTO

• To select the desired Title and Chapter, press the GOTO Button once, the Title and Chapter selection menu will appear on the screen. Use the Direction and Numeric Buttons to select the desired title and chapter. The unit will play the selected chapter automatically.
• Select the desired establish time by Title to play, press the GOTO Button twice, the time selection table appear on the screen. Using the Direction and Numeric Buttons to enter the desired time. The unit will start plays the movie from the selected established time automatically.
• Select the desired establish time by Chapter to play, press the GOTO Button three times, the time selection table appear on the screen. Using the Direction and Numeric Buttons to enter the desired time. The unit will start plays the movie from the selected establish time automatically.

A-B Repeat

• During Playback, press the A-B Button to define where you want the section to start. Press the A-B Button again to define where you would like the section to end, the unit will then plays the selected section repeatedly and continuously. Press the A-B Button again to resume normal playback. (This function is not available on all discs).

SLOW

• During playback, press the SLOW Button to set the slow motion speed. Press the Play/Pause Button to resume normal playback.

ZOOM

• During movies playback, press the ZOOM Button to zoom in out the picture. In zoom mode, press Direction Buttons to select the parts of the picture to watch. This function is not available on all discs.

USB or SD/MMC CARD PLAYBACK

1. Insert the USB Device or SD/MMC memory card into the USB port /card slot as the figure below.
   • NB: The unit supported to playback:
   • MP3; WMA (Music file)
   • JPG (Pictures)
   • MPEG2; AVI; VOB (Video files up to 640 x 480 pixels)
   • Make sure correct files were saved in the USB device or memory cards.
2. In Power ON mode, press the USB/CARD Button on remote control, or press DVD/USB/CARD Button on the panel, the “DVD, CARD, USB” selection window will pop up on the screen. Using the Direction Buttons to select and highlight the desired source, then press the 0K Button to confirm. Press the 0K Button again, the Folder/FiIe list will appear. using the Direction button to select the desired file then press the 0K Button to start playback.
3. During playback:
   • Press the or Button repeatedly to skip tracks.
   • Press the or Button repeatedly to select and set the fast searching speed
   • Press the Play/Pause Button to pause. Press again to resume.
4. When finished, press the STOP Button to stop. Press the POWER Button to power off (Standby) the unit.

NOTE: For saving battery power. If long period of time will not use, power off the unit by slide the POWER ON-OFF Switch to OFF position. Using the earphone to listen privately.

SYSTEM SETUP

Setting Menus

In stop playback mode, press the SETUP Button the menu will appear on the screen as below. Using the Direction Buttons to select and highlight the function you need to set or reset. Press the OK Button to enter or confirmed the selection. After ætting, press the SET UP Button to save the settings and exit.

In General Setup Page

1. If TV Shape is selected, using the Direction and 0K Button to set the aspect ratio to match the connected TV.
2. If Angle Mark is selected, using the Direction and 0K buttons to set it On or Off. If set to On, when multi-angles are available in the playing DVD, the mufti-angle logo will appear on the screen.
3. If OSD Lang (On Screen Display Language) is selected, using the Direction and 0K Buttons to set the OSD language as desired.
4. If Screen Saver is selected, using the Direction and 0K Buttons to set it On or Off. If set to On, the screen saver will come on when the unit stops or the image is paused for approximately five minutes.
5. If Last Memory is selected, using the Direction and 0K Buttons to set it On or Off. If set to On, the unit will start playback from the position where the disc was stopped last time.

In Audio Setup Page

If Speaker Setup is selected, press the 0K Button, the sub-setting menu will appear.

1. If Downmix is selected, using the Direction and 0K Buttons set it to Lt/Rt; Stereo.
2. If set to Lt/Rt, the rear left or rear right channels will plays on both Left and Right Speakers.
3. If set to Stereo, the rear left channel will plays on Left Speaker, the rear right channel will plays on Right Speaker.

In Dolby Setup Page

1. If Dual Mono is selected, using the Direction and 0K Buttons to set it to Stereo, L-Mono (Play Left channel on all speakers), R-Mono (Play Right channel on all speakers) or Mix-Mono (Mixed Right and Left channel then plays on all speakers) as desire. (Functions depend on the recording of the disc).
2. If Dynamic is selected, using the Direction and 0K Buttons to set the dynamic level as desired or tum it off.

SYSTEM SETUP

In Video Setup Page

1. If “Picture” is selected, using the Direction and 0K Buttons to set the panel quality such like Sharpness; Brightness; Contrast; Hue or Saturation as desired.
2. If Picture Quality is selected, using the Direction and 0K Buttons to set the Sharpness; Brightness; Contrast; Gamma; Hue or Saturation of the Video input signal as desired.

In Preference Setup Page

1. If TV Type is selected, using the Direction and 0K Buttonsto set to PAL, AUTO or NTSC.
   • ( NOTE: The TV system in USA, Canada and Mexico is NTSC.)
2. If Audio, Subtitle or Disc Menu is selected, using the Direction and 0K buttons to the priority of the available language. ( Function depend the recording Of DVD).
3. If Parental is selected, using the Direction and 0K Buttons to the rating level as desire as follow:
   • Press the Button to enter, the rating level list will appear.
   • Press the A or Button to select the desired level.
   • Press the OK Button to enter, password enter window will pop up.
   • Enter the six-digit password ( default password is 136900 ) by pressing the Numeric Buttons.
   • Press the OK Button to save the settings and exit.
   • Rate levels:
   1. (Kid Saf ): Kid safe
   2. (G): All ages
   3. (Pg): Parental Guidance
   4. (Pg 13): Parental Guidance less than 13 years old
   5. (Pgr): Under 17 years old, Parental Guidance suggested
   6. (R): Under 17 years old, Parental Guidance strongly
   7. (Nc 17): 17 years old or above
   8. (Adult): Adult only
4. If Password is selected, press the 0K Button to enter, the sunsetting menu will
   • If Password McKie is selected, using the Direction and 0K buttons to set it On (activate the rating level setting) or Off (Password is needed).
   • If Password is press the 0K Button twice to enter. The New password setting menu will.
   • Enter the six digit old password. The Colum of New Password will highlight.
   • Enter the new six digit password. The Colum of Confirm Pwd will be highlighted.
   • Enter the new password again. The oK Button on the screen Will be highlighted.
   • Press the OK Button to save the setting and exit.
5. If Default is selected, using the Direction and OK Buttons to reset all press the SETUP Button to exit without changes.

CARE AND MAINTENANCE

Caring for Discs

• Treat the disc carefully. Handle the disc only by its edges.
• Never allow your fingers to contact with the shiny, unprinted side of the disc.
• Do not attach adhesive tape, stickers, etc. to the disc label.
• Clean the disc periodically with a soft, lint-free,dry cloth, Never use detergents or abrasive cleaners to clean the disc. If necessary, use a CD cleaning kit.
• If a disc skips or gets stuck on a section of the disc, it is probably dirty or damaged(scratched).
• When cleaning the disc, wipe in straight lines from the center of the disc to the outer edge of the disc. Never wipe in circular motions.

SPECIFICATIONS

Power Source

• Power Source: Built-in DC 7.4V Lithium-ion rechargeable battery, recharge by DC 9-12V, 1A through DC IN Jack
• Power Source of Remote Control: DC 3V, 2 x AAA Size Batteries (included)
• Disc Compatibility: DVD/VCD/SVCD/DVCD/CD/CD-R/CD-RW/DVD±R/DVD±RW

SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

ACCESSORIES

• 1 x User’s Manual
• 1 x AC/DC Adaptor
• 1 x Remote Control with 2 x AAA Size Batteries
• 1 x Car Adaptor
• 1 x A/V Cable

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>