Panasonic ES4815S451 Battery Operated Wet/Dry User Manual

Panasonic ES4815S451 Battery Operated Wet/Dry

Safety Instructions

• To ensure proper operation of the appliance, please carefully read all information contained in these Safety Instructions.
• All information in this section is provided to instruct you in the correct and safe operation of this appliance so that you can avoid injuries to yourself and others as well as property damage. Safety warnings, cautions and precaution symbols are distinguished as follows.

ALWAYS FOLLOW THESE IMPORTANT SAFETY PRECAUTIONS!

• WARNING: This message indicates potentially hazardous actions and situations, which, if not avoided, could result in death or serious injury.
• CAUTION: This message indicates potentially hazardous actions and situations, which, if not avoided, could result in personal injury or property damage.

Safety Precautions Symbols

• A circle and slash symbolize prohibited actions and behaviors
• A solid circle denotes mandatory actions and instructions to be followed for safe operation
• After reading these safety instructions, ensure they are kept in a place allowing easy viewing at all times by the appliance user.
• After reading these safety instructions, ensure they are kept in a place allowing easV viewing at all times by the appliance user.

WARNING: Do not dismantle!

• Do not attempt to modify, repair, or in any way dismantle the appliance, other than when discarding it at the end of its useful life.
• Doing so could result in fire, electric shock or mechanical malfunction.
• For repairs and servicing, please consult the place of purchase or a customer service center designated by the manufacture.

CAUTION! Mandatory

• Before use, always make sure that the outer foil has not become damaged or misshapen.
• Failure to do so can cause damage to skin.
• Always use your shaver for its intended use, as described in this manual.
• Failure to do so can cause personal injury or mechanical malfunction.

Prohibited!

• Do not put the batteries in fire, short-circuit it or disassemble it.
• Doing so may result in burn or injury.

NOTICE

• Do not leave the appliance in places where it will be exposed to high temperatures or direct contact with sunlight.
• Doing so can cause mechanical malfunction.
• Do not wipe any part of the shaver with thinner, benzine or alcohol.
• Clean it by using a cloth dampened with soapy water.
• Do not leave the shaver in direct sunlight to dry with the outer foil removed.
• Doing so may cause deterioration of the waterproof seal, which could result in malfunction.
• Wash the shaver in tap water. Do not use salt water or boiling water. Also, do not use cleaning products that are designed for toilets, bathrooms or kitchen appliances. Do not submerge the shaver for a long time.
• Do not take the housing apart as this can affect the watertight construction.

Before use

• This Wet/Dry shaver can be used for wet shaving with shaving lather or for dry shaving. You can use this water tight shaver in the shower and clean it in water. Treat yourself to wet lather shaves for at least three weeks and notice the difference. Your Panasonic
• Wet/Dry shaver requires a little time to get used to because your skin and beard need about a month to adjust to any new shaving method.

Parts identification

(see Fig. 1)

• A) Protective cap
• B) Outer foil
• C) Outer foil release button
• D) Foil frame
• E) Inner blade
• F) Foil frame release button
• G) On/Off switch
• H) Switch the lock button
• I) Battery cover
• J) Battery cover release dial
• I) Cleaning brush
• K) Travel pouch

Replacing batteries

Before replacing the battery, wipe the shaver free of moisture to prevent the inside from getting wet.

1. Turn the battery cover release dial and remove the battery cover. (Turn the dial to 90° in the coun- ter clockwise direction and re- move the battery cover.) (Fig.2A)
2. Insert the two AA (LR6) alkaline batteries as shown in the figure. After checking that their polarity matches that indicated behind the shaver main body. (Fig. 2B) (If the (+) and (- poles are not inserted properly, the motor will not oper ate.) Do not use new batteries with old ones.
3. Replace the battery cover with the dial mark at open. Check for proper sealing of the water-proof ing ring.
4. After replacing the battery cover to the main unit, turn the dial mark to close (Fig. 2C).

For wet shaving

• Put a thin layer of shaving foam on your face which works as a lubricant. Shaving foam is the most suitable among many other shaving aids (gel, soap, cream, etc). Do not put a thick layer of shaving foam as it may affect the shaver’s performance. If the shaving head is clogged with foam, simply rinse it under running water.

Cleaning your shaver (see Fig. 4)

• For cleanliness and convenience, we recommend that you clean your shaver with water and some liquid hand soap. Regular cleaning will
• keep your shaver in good condition while preventing odors or bacteria from developing, and maintain the cutting performance.
• With the outer foil in place, apply some hand soap onto the outer foil.
• Turn the shaver on and pour a small amount of water over the outer foil.
• After about 10-20 seconds, turn the shaver off.
• Remove the foil frame and rinse it under tap water.
• Wipe off any moisture from the shaver with a dry cloth and remove the protective cap to allow the outer foil to dry completely.

Brush cleaning

(see Fig. 5)

• Squeeze the foil frame release button and lift the foil frame upwards to remove it. Remove the inner blade by grasping it firmly at both ends and pulling it straight away from the shaver. Clean the outer foil, the shaver body with the long side of the brush. Clean the inner blade with the short side of the brush. Do not use the short brush to clean the outer foil.

Replacing shaving head components

• With daily use, the outer foil may need to be replaced every year and the inner blades every 2 years.

Replacing the outer foil WES9837 (see Fig. 6)

• Squeeze the outer foil release but- tons and lift the outer foil upward to remove it. To insert the new outer foil, press down until it snaps into place.

Replacing the inner blades WES9850 (see Fig. 7)

• Press the foil frame release button and remove the foil frame. Remove the inner blade one at a time by grasping it firmly at both ends and pulling straight away from the shaver.
• To insert the new inner blades, hold the blade one at a time at both ends and press downward until it snaps into the shaver.

Caution

• Do not leave the appliance in places where it will be exposed to high temperature or direct contact with sunlight.
• Do not leave the shaver in direct sunlight to dry with the outer foil removed.
• The outer foil is very thin. If han- dled improperly, it can be easily damaged. To avoid personal injury, do not use the shaver if it has a damaged foil or inner blade.
• Wash the shaver with tap water. Do not use salt water or boiling water. Also, do not use cleaning products that are designed for toilets, bath rooms or kitchen appliances. Do not submerge the shaver in the water for a long time.
• Do not wipe any part of the shaver with thinner, benzine or alcohol.
• Clean it by using a cloth dampened with soaPy water
• Do not take the housing apart as this can affect the watertight con struction.
• If the shaver is not used for a long time, remove the batteries to pre- vent possible leakage.
• If the shaver is not working prop- erly, have it inspected at the place of purchase or an authorized servIce center.
• Always use your shaver for its in- tended use, as described in this manual.

Specifications

• Power source: 3.0V DC
• (Two AA (LR6) alkaline batteries, not included)
• Panasonic Corporation
• http://panasonic.net
• Printed in China
• ES92104815F451 Y1211-2

Documents / Resources

| Panasonic ES4815S451 Battery Operated Wet/Dry [pdf] User Manual
ES4815S451 Battery Operated Wet Dry, ES4815S451, Battery Operated Wet Dry, Operated Wet Dry, Wet Dry
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>