Dongguan CN-921 Portable Power Station User Manual
- June 10, 2024
- Dongguan
Table of Contents
Dongguan CN-921 Portable Power Station
Product Information
This product complies with part 15 of the FCC Rules and has been evaluated to meet general RF exposure requirements. The device must be operated within a distance of no less than 20cm from the user. Any changes or modifications to the device that are not explicitly approved by the manufacturer can void your authority to operate this equipment.
Usage Instructions
In order to ensure the optimal performance of the device, please follow these instructions:
- Reorient or relocate the receiving antenna to improve signal reception.
- Increase the separation between the device and receiver to reduce potential interference.
- When connecting the device, use an outlet on a circuit different from that to which the receiver is connected.
- If you require further assistance, consult the dealer or an experienced radio/TV technician.
- By following these instructions, you can safely and effectively operate this product.
- This product manual is suitable for portable power stations with AC output ago of 1OUV-240V/50HZ-60HZ. The actual specifications and parameters of the product can be customized according to different countries, regions, and users. Please refer to Ihe actual product please read the manual carefully before using this product.
- Thank you very much for using the multifunctional portable power station produced by our company! This manual is designed to help you use the product correctly. please read this manual carefully before use The pictures in the book and manual are for reference only, if the individual pictures do not match the actual product, please refer to the actual product.
Overview
Produet introduction
- This product is a portable power station system that integrates mutiple functional modes. It can be placed indoors or in a car, and can also be used as an outdoor emergency backup power supply. And according to different usage methods, you can choose solar energy or grid charging, and the output provides two different voltage modes of
- AC and DC to adapt to the needs of different electronic products. The system can provide rated 110V or 220V AC output, and is equipped with 5V, 15V, PD3,0 and other DC outputs, The system has a builtin 18650 lithium battery with strong output capability and is equipped with an advanced management system, which can ensure the long life of the battery and the safety of the use process
Features
- A. Portable, mobile, and easy to use:
- B. Support wide voltage charging: 12-30V/3A (photovoltaic charging):
- C. AC 110V or 220V, DC 5V/15V and other voltage outputs;
- D. High-performance, high-safety, high-efficiency battery management;
- E. System protection functions such as undervoltage, overcurrent, overtemperature, short circuit, overcharge, and overdischarge,
- F. Support QC3,0 quick charge:
- G. Suppart bidirectional PD 60W/18W(Output only) TYPE-C interface,
Product technical indicators
Specifications
Product function description
Pancl function
Display display function
Protection function
Product Instructions
Tlow to use this product to supply power lo USB digital devices Connect the
standard USB cable (or TYPE-C cable) of the digital device to the USB
interface (or TYPE-C interface) of this product, press the main power switch,
and then turn on the DC output function.
If the real-time battery percentage is displayed, it means that the DC output
function has been turned on, and the USB output of the machine will provide
power for digital devices. If you want to exit the DC output function, press
the main power switch to turn off the DC output function; if you directly
unplug the bad, you also need to tum off the main power switch when the
product is not in use to avoid power loss.
How to use this produet to supply power to AC electrical cquipmcnt
- First press the power button to turn on the power of the product, then press the AC button to turn on the AC output function, and then connect the power cord plug of the AC electrical equipment to the AC socket of the product to supply power to the AC electrical equipment.
- To exit the AC output function, press the power button to turn off the
- AC output function. If you directly unplug the AC load, you also need to tun off the AC power switch when the product is not in use to avoid power loss.
- Note: This product is suitable for equipment with AC power below 300w, Fit is overloaded, and the machine w automaticaly turns off the AC output function to protect the product. In addition, some AC electrical equipment, Ihe poer is within 300W, but it needs a peak power to snarl or operate during the startup process or during a certain work process, this time is relatively shot this product supports AC electrical appliances with a peak power of less than 300W equipment, il exceeds Ihis range,
- This will result in over-bad protection of the product. please remove lhe ekctrical equipment at this time and oonsuk the equipment manufacturer for more information,
How to use the lighting lunation
- Press the power button and the Light button to tum on the LED lighting mode, Press the lighting button in turn to switch between various lighting modes.
How to charge this produet
Charging with AC adapler
- This product is equipped with a power adapter, which can be charged with a 15V/3A output power adapter. The product can be charged by connecting the interface of the power adapter to the DC charging input interface of this product,
Charging with solar panel
- The product can be charged by connecting the output of the solar panel to the DC charging input interface of the product, Place the solar panel as much as possible in a place with strong sunlight, and form a 45-degree angle with the horizontal plane, which is conducive to direct Sunlight When charging, the display shows the percentage of power.
- When the percentage of power on the display is 100%, it means that the product is fully charged. At this time, please disconnect the charging connection line in time.
Precautions for product use
- When using the product, handle it with care, do not drop it, or hit it with a sharp object,
- Do not cover the product with towels, clothes, and other items during use to avoid fire
- Please use the special charger provided with the power supply for charging
- Some portable devices may need to be set in the charging mode before they can be charged, For more information, please refer to the corresponding device manual:
- This product has a built-in high-quality lithium-ion battery, no memory effect, large capacity, durable. However, we still recommend that users use it in the range of-10C-40t to obtain the best charging capacity:
- The device is not used for a long time, in order to ensure the service life of the product (lithium battery), the power supply should be charged and discharged regularly, in principle, once within 2 months, and at least once within 4 months
- If the machine is found to emit smoke or fire during use, stop using it immediately, use a fire extinguisher to put out the fire, and prohibit direct fire with water to avoid danger.
Safety and Maintenance
-
a) Do not short-circuit this device. Please avoid storing this device with metal objects such as coins, jewelry, keys, etc.
-
b) Do not heat the device or throw it in fire, water, and other liquids, avoid high temperatures, including direct sunlight;
-
c). Do not place the device in a highly humid and dusty environment
-
d). Do not disassemble the device without permission;
-
e) This device has a built-in non-removable rechargeable battery, please do not try to remove the battery to avoid damaging the device;
-
f) Do not drop, place heavy objects or strongly impact the product,
g) Please keep this product out of the reach of persons with the low physical. sensory and mental abilities (including children), inexperienced and related knowledge. This product should not be used unless under the Sunervision or direction of a person responsible for their safety: -
h). Please avoid letting children play with this product,
-
I) This product may heat up when charging, this is a normal phenomenon, please be careful when handling it;
-
j) The charging time should not exceed the charging time of this product,
-
k) After the portable device is fully charged, please disconnect it from the product in time;
-
L) Use this product normally to avoid electric shock;
-
m). Please dispose of scrapped products in accordance with regulations, and do not dispose of built-n batteries as domestic waste to avoid expbsion and pollution;
-
n) This product is only used as an emergency power supply and cannot replace the standard DC power supply or AC power supply of household appliances or digital products
Statement
- All rights reserved. Without the written permission of the company, no unit or individual may excerpt or reproduce part or all of the contents of this manual, and may not transmit it in any form.
- Other trademarks appearing in this manual are owned by their respective owners.
- Due to product version upgrades or other reasons, the contents of this manual will be updated from time to time.
- Unless otherwise agreed, this manual is only used as a guide, and all statements, information, and recommendations in this manual do not make any guarantees.
Warranty Card
This product with warranty service within 12 months from the date of purchase
Guarantee conditions: Please show his guarantee card and fill in the relevant
contents in detail. The company provides 12 months of warranty service from
the date of purchase.
Warranty range
- Product quality issues in normal use conditions.
- Damaged due to incorrect operation is not within the scope of the warranty.
- Privately disassemble products. No warranty
- Products with labels are not guaranteed.
Our company provides charge maintenance services. a client should pay repair fees for the products over the warranty period.
FCC
- This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
- However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
- This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation.
- The device has been evaluated to meet general RF exposure requirements.
- The distance between a user and the products should be no less than 20cm.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>