GIGABYTE BIOS UPDATE AMD Renoir and Cezanne Platform User Guide
- June 10, 2024
- Gigabyte
Table of Contents
GIGABYTE BIOS UPDATE AMD Renoir and Cezanne Platform
Product Information
The BIOS update guide provided by Gigabyte is intended for the AMD Renoir and Cezanne platforms. The document states that in order to use the product effectively, users may require various types of documentation including the user manual, user guide, and quick installation guide. These documents are available on the online product page of Gigabyte’s website.
Disclaimer
Gigabyte states that the information provided in the BIOS update guide is protected by copyright laws and is the property of Gigabyte. The company may make changes to the specifications and features of the product without prior notice. However, changes made to the document itself require written permission from Gigabyte.
Product Usage Instructions
Users can follow the steps below to update the BIOS:
- Visit the Gigabyte website and search for the product page using the model name.
- Go to the support page and download the latest BIOS file.
- Copy the BIOS package into the BIOS folder.
- Power on the device and press DEL to enter the BIOS settings page.
- Select Boot Option #1 and choose the USB flash drive that contains the BIOS package.
- Save changes and reset the device. Confirm Yes when prompted.
- All available devices will be displayed on the screen. Type “fs0” to select your USB drive.
- Enter the BIOS folder and type “flash.nsh” to start the BIOS update process.
- Wait for a few minutes until you see a screen confirming that the update has finished.
- Reboot the device and check that the BIOS version has been updated correctly.
Note: The above instructions are intended as a summary only. For more detailed instructions, refer to the Gigabyte user manual or visit the support section of the product page.
Copyright
© 2021 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved.
The trademarks mentioned in this manual are legally registered to their
respective owners.
Disclaimer
Information in this manual is protected by copyright laws and is the property
of GIGABYTE. Changes to the specifications and features in this manual may be
made by GIGABYTE without prior notice. No part of this manual may be
reproduced, copied, translated, transmitted, or published in any form or by
any means without GIGABYTE’s prior written permission.
Documentation Classifications
In order to assist in the use of this product, GIGABYTE provides the following
types of documentation:
- User Manual: detailed information & steps about the installation, configuration and use of this product (e.g. motherboard, server barebones), covering hardware and BIOS.
- User Guide: detailed information about the installation & use of an add-on hardware or software component (e.g. BMC firmware, rail-kit) compatible with this product.
- Quick Installation Guide: a short guide with visual diagrams that you can reference easily for installation purposes of this product (e.g. motherboard, server barebones).
Please see the support section of the online product page to check the current availability of these documents.
For More Information
For related product specifications, the latest firmware and software, and
other information please visit our website at http://www.gigabyte.com
For GIGABYTE distributors and resellers, additional sales & marketing
materials are available from our reseller portal:
http://reseller.b2b.gigabyte.com
For further technical assistance, please contact your GIGABYTE representative
or visit https://esupport.gigabyte.com/ to create a new support ticket
For any general sales or marketing enquiries, you may also message GIGABYTE
server directly by email:
server.grp@gigabyte.com
BIOS Update
UEFI Shell
- Follow these instructions to update BIOS:
-
Go to the Gigabyte website (https://www.gigabyte.com/us/Mini-PcBarebone) and key in the model name in the search bar to access the product page.
-
Go to “Support” page and look for the latest BIOS file. Click “Download”.
-
Copy BIOS Package into the BIOS folder.
-
Power on BRIX and press “DEL” to enter the BIOS setting page.
-
Go to Boot Option #1 and choose your USB Flash device accordingly.
-
Click “Save Changes and Reset” to save configuration and exit, then select “Yes”.
-
All the devices will be displayed on the screen, then type “fs0” to select your USB drive.
-
Enter the BIOS folder and type “flash.nsh” to start the BIOS update process.
-
After a few minutes, you will see the following screen during the update.
-
Reboot the device then you’ll find the BIOS version has been updated accordingly.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>