Christ PA10010884 Touch Industrial Open Frame 24 Instruction Manual
- June 10, 2024
- Christ
Table of Contents
PA10010884 Touch Industrial Open Frame 24
Product Information:
- Article Designation: Touch Industrial Open Frame 24
- Drawing Number: PA10010884
- Scale: 1:4.5
- Page: 1/2 (Front Plate and Spacer Plate), 2/2 (Counter Plate)
- General Tolerances: DIN ISO 2768-mK
- Document Type: General Arrangement Drawing EN
- Proprietary Notice: ISO 16016 to be considered
- Maximum Usage Limit: 7
This product comes with a front plate, spacer plate, and counter plate. The front and spacer plates have a cut-out section that may need adjustments according to the production tolerances and the ambient temperature at the customer’s location. Please refer to the datasheet for more information.
Product Usage:
- Ensure that the product is handled and installed by trained personnel only.
- Check the product for any visible damage before installation.
- Refer to the cut-out dimensions on the front and spacer plates according to your assembly situation.
- Insert the product into the designated area, ensuring that it is securely fixed in place.
- Connect the necessary cables to the product.
- Power on the product and follow the instructions on the datasheet to start using it.
- Do not exceed the maximum usage limit of 7.
DIMENSION
The actual cut-out-dimensions of the front- and spacerplate need to be subjected to the prevalant assembly situation (production tolerances, ambient temperature, etc.) and therefore to be defined by the customer.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>