FIAMMA 98655Z043 F65 Mounting Bracket Kit Instruction Manual

June 10, 2024
FIAMMA

FIAMMA 98655Z043 F65 Mounting Bracket Kit Instruction Manual
FIAMMA 98655Z043 F65 Mounting Bracket Kit

Package contents

Package contents

Installation instructions

Installation instructions
Installation instructions
Installation instructions
Installation instructions

When using the awning please follow the instructions of the product.

  • Check that nothing has been damaged or deformed during transport.
  • In the event of doubts or questions concerning the installation, use or limitations of the product, contact the dealer.
  • We recommend that the installation is carried out by qualifi ed personnel and in compliance with current local regulations.

ATTENTION: INSTALLATION ON FIXING KIT
The brackets must always be well-aligned to each other to avoid later problems; in case they are not, they must be properly shimmed using the spacers to ensure the alignment. The installation of the awning can occur only when the brackets are perfectly aligned to the roof of the vehicle.

OVERVIEW
OVERVIEW OVERVIEW

Attention: tighten the screw without forcing

OVERVIEW

Attention: tighten the screw without forcing

INSTALLATION
INSTALLATION INSTALLATION

Important: use of SIKA 252 adhesive is essential for fixing the bracket (brackets).

INSTALLATION
INSTALLATION
INSTALLATION
INSTALLATION
INSTALLATION
INSTALLATION
INSTALLATION
INSTALLATION
INSTALLATION
INSTALLATION
INSTALLATION
INSTALLATION

INSTALLATION

Important: use of SIKA 252 adhesive is essential for fixing the bracket (brackets).

INSTALLATION
INSTALLATION
INSTALLATION
INSTALLATION
INSTALLATION
INSTALLATION
INSTALLATION
INSTALLATION
INSTALLATION
INSTALLATION
INSTALLATION
INSTALLATION

Read the following instructions and warnings carefully; failure to observe these installation and usage instructions as well as the laws for driving in the relevant country may cause  severeharm or damage for which the manufacturer declines all responsibility. Before  installation,ensure compatibility with the vehicle on which the product must be installed. Checking thatthe wall/roof/rear door is suffi ciently solid and suitable for guaranteeing the resistance of the anchoring points is always mandatory. If not, strength and compliance with the maximum load indicated in the instructions are not guaranteed and it will be necessary to reinforce it these points.

ATTENTION Periodically check the brackets to make sure they are firmly attached (especially after the first kilometers) make sure the bolts are not loose and that holding brackets have not shifted.

Warranty Fiamma
In case of defects with regards to materials and manufacturing, the customer is entitled to the warranty in accordance with local laws and regulations of the country in which the product was purchased.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals