Speakers X5 Portable Wireless Speaker Instructions

Speakers X5 Portable Wireless Speaker

Technical Specifications

• Wireless Standard: 5.0
• Transmission distance: 10 meters Output power: -‘!OW
• Playtime: 4–6H
• Frequency effect: 80Hz ~ lDKHz
• Speaker: 66mm”2, 40 20W
• Input Power:  5V= 2A
• Maximum current: consumption: 2A
• Battery type: 18650 Li-ion 6000mAh
• Audio signal Input Interface:   standard 13.5mm headphone Jack (stereo)

Features

1. Wireless: connection.
2. Memory function.
3. Support U Disk/ TF card/ AUX play mode.
4. Bui It-In ltthlum bamuy.
5. Support MP3/WAV/WMA/FI.AC/APE music format decoding
6. Use high-fidelity Speakers, to make the sound more natural and delicate
7. l+ l serial function
8. Water resistance IPX5

OVERVIEW

Button instruction

1. Volume + long-press volume+; Click: Next.
2. Pause/play
3. Mode key. Click to switch functions.
4. light switch / off
5. Power button: long press to power an; Cilek: 5er1es.
6. Volume – Long press Volume Minus: Click: The previous song,
7. The AUX In jack
8. USB port. when inserting USB flash drive, the USB playback model is set to USB by defualt.
9. When a TF card Is Inserted Into a TF card, the default TF card playing mode is set.
10. Type-c charging cable port. When the type-C charging cable is inserted, the device is charge by defualt.

Directions for use

1. Device to connect

2. Turn on the device to default wireless mode.

3. Tum on a wireless device, search model XS and connect, play music after connection successfully.

4. Suitable for all kinds of mobile phones squipaed with wireless technology, a wireless adapter, a wireless player

5. Voice prompt

6. there is a voice prompt when tum on/off.

7. Low-power voice prompt 3 times, shutdown after 15S.

8. there is a voice prompt when the button ta the maximum volume, but no voice prompt at the minimum volume.

9. Mode switching

10. enter into wireless by default when starting up, the switching sequence Is as follows: wireless mode TF card mode-USB mode- AUX mode.

11. made: post-insertion priority.

12. LED Ught

    • Wireless search status: blue light does not flash.
    • Wireless pairing Status: Lighta change Play status.
    • The colored Ught flashes slowly for about 1.5 seconds/time.
    • Power-on state: The blue Ughtdoes not flash.

13. volume the default volume of speaker is 70% when starting up.

14. Charging to use
    The machine built an overcharge protection circuit, which can be connected to a computer ar charger for a long time, about four hours to fully charge. Every battery playback time will be different due to the use of the different sizes of volume.

15. No working status, automatic shutdown after 15 minutes.

Troubleshooting

1. Auto power off: the battery protection Is automatically activated when the battery Is low, please use t after charging for 5 hours.
2. Can not play music: the music file storage path cannot be recognlzed, save files, and stored In the root directory of the removable device.
3. Connect the computer no sound computer interface connection error, please select the correct audio output port
4. No function or function keys wrong try again after shutdown.
5. if the machine is stuck abnormally, press the power button for 15 seconds to reset it.

Product Warranty

• Username: _____
• Contact number: _____
• Date of purchase: _____
• Product number: _____
• Maintenance failure: _____

Note: The product warranty Is 6 months.

FCC

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a partieular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>