PANDUIT CT-3001 Mouser Singapore Instruction Manual

CT-3001 Mouser Singapore

Product Information – CT-3001/STBT

The CT-3001/STBT is a crimping tool manufactured by Panduit Corp. The device is designed to crimp wires with a cross-sectional area of 0.6 to 16mm. It is a listed tool with the serial number HE.20208 and batch number 304711. The device is compliant with Part 15 of the FCC Rules and with Industry Canada licence-exempt RSS standard(s). The device comes with a warranty seal that should not be broken, as breaking it may result in a loss of warranty. The tool has a date code, which is used to identify the year and month of the manufacturing of the tool. The consecutive number on the tool is used to identify the tool’s number. The CT-3001/STBT crimping tool weighs 6.6 lbs (3.0 kg) and has a crimping time of 20 seconds. It is designed for professional use and should be used in accordance with DIN EN 50110 safety standards.

Product Usage Instructions – CT-3001/STBT

Before using the CT-3001/STBT crimping tool, users must read all safety warnings, instructions, illustrations, and specifications provided in the user manual. Failure to do so may result in electric shock, fire, and/or serious injury.

General Safety Rules

1. Only use the CT-3001/STBT crimping tool for its intended purpose.
2. Wear appropriate PPE while using the tool, such as safety glasses, gloves, and ear protection.
3. Do not touch the tool with wet hands or while standing on a damp surface.
4. Keep the tool away from children and untrained individuals.
5. Do not use the tool if the warranty seal is broken.
6. Make sure to use the tool in compliance with local safety regulations.

Product Usage Steps

1. Identify the wires that need to be crimped and strip them to the appropriate length using a wire stripper.
2. Insert the stripped wire into the appropriate crimping slot on the CT-3001/STBT crimping tool.
3. Squeeze the handles of the crimping tool with enough force to crimp the wire. Hold the handles for 20 seconds, then release.
4. Repeat the crimping process for each wire that needs to be crimped.

DESCRIPTION

DIMENSION

WARNING

Read all safety warnings, instructions, illustrations and specifi cations provided with this power tool. Failure to follow all instructions listed below may
result in electric shock, fi re and/or serious injury. Save all warnings and instructions for future reference.

Use tool only with 18 V Makita battery

Error codes

1. Overcurrent fuse
2. Overcurrent comparator
3. Overheat board
4. Overheat battery
5. Battery empty, operation stop
6. Faulty crimp motor in operation
7. Faulty crimp motor not in operation
8. Low battery
9. Battery empty
10. RTC battery low
11. Tool deactivated
12. Service necessary
13. RTC not found
14. BT unit not found
15. Pressure sensor not found
16. Burst pressure exceeded
17. Battery temperature too low

Klauke i-press Software

www.klauke.com/connectivity

NOTICE:
Changes or modifi cations made to this equipment not expressly approved by Klauke may void the FCC authorization to operate this equipment.

SPECIFICATION

Declaration of conformity

Declaration of conformity. We declare under our sole responsibility that this product is in conformity with the following standards or normative documents: EN 62841-1, EN ISO 12100, EN ISO 13857, EN ISO 13854, EN 28662-1, EN 61000-6-3, EN 61000-6-2, EN 60529, EN 1037 in accordance with the regulations of directives 2006/42/EG, 2014/30/EU, 2011/65/EU.

Blackfin Tools Certificate of Calibration

Subject: Panduit BlackFin Series
The Panduit BlackFin tools have completed the following Testing criteria in the Factory before shipped.

Checklist Final Inspection

1. Final Inspection (type, serial number, product group, etc.)
2. Check head for stop or locking
3. Check the pressure with the housing closed
4. Check if all screws are installed
5. Check whether the machine is “reset”
6. Check if a warning sticker is attached
7. Check whether the inspection sticker is attached
8. Check the cleanliness (oil leakage, case, etc.)
9. Check whether the accessories are complete
10. Check whether the desired test reports are attached (TQ16, etc.)
11. The fi nal inspection is carried out by the Service Center Goods Department

The user of the Panduit product is responsible for verifying suitability of the product for the application and assumes all risk and liability in connection with its use.

Our most important connection is with you

We have the knowledge and experience to help you make the most of your infrastructure investment. www.panduit.com
Let’s Connect
P: 800-777-3300 ::
F: 708-532-1811
www.panduit.com/en/support/contact-us.html

References

• i-press® software and i-press® app | Klauke
• Verbindungen mit System | Klauke
• Panduit | Contact Us
• Service Center | Klauke

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>