CASIO 3225 Men’s Digital Watch User Guide
- June 17, 2024
- Casio
Table of Contents
CASIO 3225 Men’s Digital Watch
Product Information
Specifications
- Battery: Module No. 3225 – CR2016 (Approx. 7 years battery life)
- Battery : Module No. 3226 – CR1616 (Approx. 3 years battery life)
Product Usage Instructions
Reading the display
The display shows various information including the countdown period, daily alarm settings, time, and calendar.
Countdown Alarm Operation
To set the countdown period:
- Press the A button to enter the countdown setting mode.
- Each press of the A button shifts the countdown period.
- Release the A button to start the countdown.
- When the countdown reaches zero, the alarm will sound for 10 seconds.
- Press any button to stop the alarm.
Setting Daily Alarm
To set the daily alarm:
- Press the A button in the daily alarm mode to set hours and minutes.
- Each press of the C button advances the alarm setting by 1 hour.
- Each press of the A button advances the alarm setting by 1 minute.
- Press any button to stop the beeper when it sounds for 20 seconds at the preset time every day.
Hour and Minute Setting
To set the hour and minute:
- In the daily alarm mode, press the A button to set hours and minutes.
- Each press of the C button advances the setting by 1 hour.
- Each press of the A button advances the setting by 1 minute.
- Press the B button to revert to regular timekeeping mode.
ON/OFF Setting of Daily Alarm and Time Signal
To set the ON/OFF status of the daily alarm and time signal:
- Press the C button to cycle through the different settings.
- Alarm-ON-mark and time-signal-ON-mark appear Daily alarm and time signal sound.
- Alarm-ON-mark only appears : Daily alarm only sounds.
- Time-signal-ON-mark only appears : Time signal only sounds.
- No marks appear : Daily alarm and time signal do not sound.
Setting Time and Calendar
To set the time and calendar:
- In the time setting mode, press the C button to correct seconds.
- Press the A button to shift to the next flashing position.
- Each press of the C button advances the setting by one. Keep it pressed for a quick advance.
- Press the B button to complete the setting.
Stopwatch Operation
The stopwatch display is limited to 59 minutes 59.99 seconds. For longer times, reset and start again.
- Start/Stop Operation: Press the C button to start or stop the stopwatch.
- Re-start Operation : Press the C button to re-start the stopwatch.
- Reset Operation : Press the A button to reset the stopwatch.
FAQ
- Q: How long is the battery life for each module?
- A : The battery life for Module No. 3225 is approximately 7 years, and for Module No. 3226 is approximately 3 years.
- Q: What is the working range of the stopwatch?
- A : The stopwatch display is limited to 59 minutes 59.99 seconds. For longer times, you need to reset and start again.
Reading the display
Countdown alarm operation
- The countdown can be set from one minute to 30 minutes.
- (To set the countdown period, press the A button as many times as required.)
- [Setting countdown period]
- Each press of the A button shifts the countdown period.
- The countdown starts when the A button is released. When the countdown reaches zero, the alarm will sound for 10 seconds. Pressing any button stops the alarm.
Setting daily alarm
- If the daily alarm is set, the beeper sounds for 20 seconds at the preset time every day until clear. To stop the beeper, press any button. If the time signal is set, the watch sounds every hour on the hour with a “Be-e-ep” signal. (Sound demonstration) Press and hold the C button in alarm mode to sound the beeper.
- If the B button is pressed, the watch reverts to the regular timekeeping mode. (Quick digit advance) When the C button is pressed for more than 2 seconds, the digit advances quickly. When released, digit advance will stop.
- [ON or OFF setting of daily alarm and time signal]
Stopwatch operation
signal confirms start/stop operation. (Working range) The stopwatch display is limited to 59 minutes 59.99 seconds. For longer times, reset and start again.
Setting time and calendar
- In the time setting mode, first press C on a time signal to correct seconds.
- Press A to shift the flashing position. The digit(s) to be changed will flash.
- Each press of C advances the setting by one. Keep pressed for quick advance.
- Press B to complete the setting.
Specifications
- Accuracy at normal temperature : ±30 seconds per month
- Display capacity :
- Regular timekeeping mode
- Hour, minute, second, am/pm (P), month, day, day of the week
- Time system : Switchable between 12-hour and 24-hour formats
- Calendar system : Full Auto-calendar pre-programmed from the year 2000 to 2099
- Countdown alarm mode
- Input range : 1 to 30 minutes
- Daily alarm
- Hourly time signal
- Stopwatch mode
- Measuring capacity : 59 minutes 59.99 seconds
- Measuring unit : 1/100 of a second
- Measuring modes : Net time
- Illumination: LED (light-emitting diode)
Battery : Module No. Battery type Battery life
3225 CR2016 Approx. 7 years
3226 CR1616 Approx. 3 years
- 1.5 seconds of illumination operation per day
- 20 seconds of alarm operation per day