DOSATRON D14MZ5 Interactive Schematics User Manual
- June 10, 2024
- DOSATRON
Table of Contents
DOSATRON D14MZ5 Interactive Schematics
Product Information
The Dosatron D14MZ5 is a water-powered dosing unit that can dilute concentrated products at a ratio of 1:200 to 1:20. It has a flow rate of 14 gallons per minute (3 m3/h) and can handle water pressures ranging from 4.3 to 85 PSI (0.3 to 6 bar).
The unit has a 3/4 NPT connection and requires a 200 mesh/80 micron water filter installed prior to the unit for optimal performance. A one-way check valve should also be installed downstream from the unit to protect against water hammer.
For maintenance, it is recommended to use the Injection Seal Kit Part#: PJDl120 or Injection Seal Kit – Viscous Part#: PJDl120V for yearly maintenance. The Rebuild Kit Part#: MKD14MZ5 can also be used to extend the life of the unit.
Product Usage
- Install a 200 mesh/80 micron water filter prior to the unit for optimal performance.
- Connect the unit to a water source using a 3/4 NPT connection.
- Adjust the dilution ratio by turning the dosage adjustment nut (clockwise for a higher ratio, counterclockwise for a lower ratio).
- Install a one-way check valve downstream from the unit to protect against water hammer.
- Turn on the water source and adjust the water pressure between 4.3 and 85 PSI (0.3 to 6 bar) for optimal performance.
- To maintain the unit, use Injection Seal Kit Part#: PJDl120 or Injection Seal Kit – Viscous Part#: PJDl120V for yearly maintenance. The Rebuild Kit Part#: MKD14MZ5 can also be used to extend the life of the unit.
parts
installation
UNIT SPECIFICATIONS
- 1 :200 – 1 :20
- 4.3 – 85 PSI
- 3/4″ NPT Connection
SUGGESTED MAINTENANCE
-
Injection Seal Kit
Part#: PJDl120
For yearly maintenance -
Injection Seal Kit – for Viscous
Part#: PJDl120V
For yearly maintenance -
Rebuild Kit
Part #: MKD14MZ5
Extends the life of your unit
DOCUMENT INSTRUCTIONS
- Click on a part#, to visit item page
- Click arrow back from item page, to return to this document
SUGGESTED INSTALLATION
- 200 mesh/80 micron water filter prior to the unit
- One-way check valve down-stream from the unit for water hammer protection
Dosatron International, LLC.