nVent FleXbus Foam Barrier Dispenser Instruction Manual

June 10, 2024
nVent


INSTRUCTION SHEET

nVENT ERIFLEX FLEXBUS ADVANCED FIRE BARRIER

FIRE RESISTANT CONDUCTOR PENETRATION SEAL

1

| 2

| 3

| 4

---|---
5

| 6

nVent FleXbus Foam Barrier Dispenser A6

7

| 8

nVent FleXbus Foam Barrier Dispenser A8a

9

nVent FleXbus Foam Barrier Dispenser A9

| 10

11

nVent FleXbus Foam Barrier Dispenser A11

| 12

WARNING

  1. nVent products shall be installed and used only as indicated in nVent product instruction sheets and training materials. Instruction sheets are available at www.nVent.com and from your nVent customer service representative.
  2. nVent products must never be used for a purpose other than the purpose for which they were designed or in a manner that exceeds specified load ratings.
  3. All instructions must be completely followed to ensure proper and safe installation and performance.
  4. Improper installation, misuse, misapplication or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury and/or death, and void your warranty.

nVent FleXbus Foam Barrier Dispenser T1 nVent
FleXbus Foam Barrier Dispenser T2

  • FBB (508151/508154) Firestop Blocks Packing unit is 4pc (12pc for North Amrecia / UL Version).
    **FBS (508150/508153) Foam Barrier Packing unit is 6pc.
    ***FIB (508152) Insulating Bandage Packing unit is 1pc. Need to be used only is wall thikness is < to 200mm.
    Qty of Firestop Blocks FBB and Foam Barrier FBS from this table are given for a wall thickness of 200mm. For other thickness, apply % ratio. Example : for 150mm thickness, reduce by 25% the Qty.

SAFETY INSTRUCTIONS:
All governing codes and regulations and those required by the job site must be observed.
Always use appropriate safety equipment such as eye protection, hard hat, and gloves as appropriate to the application.
nVent, nVent CADDY, nVent ERICO Cadweld, nVent ERICO Critec, nVent ERICO, nVent ERIFLEX, and nVent LENTON are owned by nVent or its global affiliates.
All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without prior notice.

TECHNICAL SUPPORT
www.nVent.com           IP8605_C        © 2021-2022 nVent All Rights Reserved

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals