GTMEDIA V8 Finder 2 Digital Satellite Finder User Manual
- June 10, 2024
- GTMEDIA
Table of Contents
GTMEDIA V8 Finder 2 Digital Satellite Finder
Package Content
IMPORTANT SAFETY INSTRUCTIONS
Thank you for choosing our product. Before installation, we would like to remind you some notes, which is very important for operating safely and properly, as follows:
- Be sure to read this user manual before starting your operation.
- You must install the dish with correct direction and angle. If the dish is not working properly, contact your local dealer.
- When the unit is suddenly moved to a hot area from a cold area, it may cause some problems. In that case, turn off the power, and turn on again after 1-2 hours.
- Keep meter placed in clean space with sufficient ventilation.
- Do not cover the meter with or place it on a unit that emits heat.
- Clean the case by a soft cloth with a little washing liquid.
- Do not remove the cover.
- Do not let the unit exposed to extreme heat, cold or humid conditions.
- No liquids or any other materials to come inside of the unit.
PRODUCT OVERVIEW & ILLUSTRATION
! Charging tips
When the adapter is charged and plugged in, the machine will restart once;
it is not a product problem, it can be used normally;
Charging support
Support 5V/9V/12V voltage, fast charge supports 1 8W.
| NO. | Description | Function |
|---|---|---|
| 1 | LCD Screen | Video display |
| 2 | Battery level display (!When the red warning appears, Please charge it in |
time.)
3| Power| Power indicator light
4| 22KHz| 22kHz indicator light
5| 13V/18V| Vertical/Horizontal polarization voltage output light;
6| Lock| Signal Lock indicator light
7| Charger| Charging: Flashing red Fully charged: Red and blue
8| Red & REC| Red Key & Enter record function
9| Green & SUBT| Green key & subtitle interface
10| Yellow & TEXT| Yellow key & Teletext interface
11| Blue & AUDIO| Blue key & Audio interface
12| MENU| Show the main menu on the screen or jump back to previous menu in
sub-menu setting conditions
13| EXIT| Escape from present menu and save the settings
14| Navigation key| Volume Control or move cursor, channel or change, confirm
etc.
15| 0-9| Number key to select channels or enter programming
16| SPEC| Spectrum interface
17| LOOP| LOOP Search interface
18| B.LIGHT| Display of LCD on/off
19| TV/R| TV and radio switch
20| INFO| Info interface
21| SAT| Display the satellite list
22| MUTE| Enable or disable the audio output
23| LNB IN| Connect to satellite antenna cable;
24| USB | Connect to USB memory
25| | Connect to adaptor input (5V/9V/12V)
26| Power Switch| Turn on/off meter
27| HDMI| Use HD cable to connect for TV
28| AV OUT| Connect to AV port for TV
29| AVIN| Connect to AV port for meter
30| Speaker| Speaker integrated
THE MENU OSD INSTRUCTION
If you have installed and connected the cables to the receiver, pressing MENU to display the Main Menu.
- Installation
- Spectrum
- Loop Search
- Calculate
- Channel
- Media
- Tools
- System
INSTALLATION
Select Installation, and then press OK into the Satellite list.
Press ◄ ► or OK key to enter the satellite setting. Use the T keys to move the
cursor, and then press the OK key to select the item you want.
-
Satellite: Select the satellite you want (Tick the icon to prompt selection).
-
LNB Freq: Select the LNB you want (Pay attention to setting the correct LNB frequency).
-
DiSEqC1 .0: Set the port number.
-
DiSEqC1 .1: Set the port number.
-
22K: Turn on or off 22 kHz switch.
-
LNB Power: Set LNB power output H,V, Auto or Off (Default Auto).
-
Motor Setup: If select DiSEqC1 .2 or USALS, we can press ◄ ► to select IF Channel, and use number key to input Center Frequency.
-
Red Key: Add new satellite.
-
Green Key: Edit the currently selected satellite.
-
Delete Key: Delete the currently selected satellite
-
Blue Key: Select the satellite currently, enter the satellite search setting menu, and confirm the program search.
-
“O” Key: Enter the Transponder setting menu, The operation method is the same as the satellite setting menu.
-
Info Key: Enter the current Transponder signal information display interface.
CALCULATE
Select Calculate, and then press OK into the Calculate. Press ◄ ► or OK key to select satellite.
- Longitude: Longitude of current satellite;
- Local Latitude: Number keys to enter the local longitude;
- Local Latitude: Number keys to enter the local Latitude;
- Calculate: According to the latitude and longitude set above, calculate the data reference needed to install the satellite.
CHANNEL
Select Channel, and then press OK into the Sub menu.
MEDIA
Select Media, and then press OK into the media menu. Can play music, pictures, movies and recorded TS programs;
TOOLS
Select Tools, and then press OK into the Sub menu.
-
Information: Press OK key to View product information.
-
Factory Setting: Press OK key to confirm factory reset.
NOTE: If you set factory setting, all the user settings and the database will be reset. -
USB Upgrade: Will update the file into the USB, and then insert the machine. Press OK to update interface, use the direction key to select update file, and press OK to update.
Warning: Please don’t turn power off or pull out the USB, otherwise it will damage the machine’s software, and can’t boot again. -
USB Backup: Backup software or DB data to U disk.
-
Record: Record TS stream to U disk.
SYSTEM
Select System setting, and then press OK into menu list.
- Language: Change the system default language.
- AV Setting: Enter the AV system settings option.
- Local Time Setting: System time zone setting.
- OSD Setting: OSD option settings, You can set Beeper on and off.
- WiFi Manager: Set WiFi connection settings.
For more product feature introduction/user guide/ software update/technical support, please visit the official forum www.freesat.cn and the official channel www.youtube.com/c/gtmediapub
YouTube Channel
|
Manufactured by: Shenzhen Jiti Multimedia Technology Co., Ltd
Address: 601 A. comprehensive building, Nankeng second industrial zone,
Nankeng community, Bantian street, Longgang District
Shenzhen,518000,Guangdong,CN
Name: GTMAX TECHNOLOGY, S.L.
Address: C. DEL PUERTO DE POZAZAL, 4, NAVE 32,28031 MADRID,ESPANA,
Contact: Samuel
Tel: +34 910641455
Mail: sp-sales01@gtmedia.cc
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>