HALCYON R798 Mini Periscope Spot Installation Guide
- June 10, 2024
- HALCYON
Table of Contents
R798 Mini Periscope Spot
Installation Guide
R798 Mini Periscope Spot
Driver Sold Separately
Constant Current – Wire in series
Do not connect luminaire/s to driver if driver is live. Inrush current from
live driver will cause instant failure of all connected luminaires. Do not
switch secondary side.
Recommended Drivers
| Non-Dimmable Driver Options | Description | Number of fittings |
|---|---|---|
| DRMACC700 4W | Mini 1-4W | lx R798 |
| DRMACC700 12W | Mini 4-12W | 2-4x R798 |
| DRACC700 12W | Standard 1.5-12W | 1-4x R798 |
| DRACC700 21W | Standard 1-21W | 1-7x R798 |
| DRACC700 40W | Standard 20-40W | 7-13x R798 |
| Dimmable Driver Options | Description | Number of fittings |
| --- | --- | --- |
| DRDMACC700 4W | Mini 2-4W | lx R798 |
| DRDMACC700 12W | Mini 6-12W | 3-4x R798 |
| DRDACC700 40W | 20-40W | 7-13x R798 |
| Under Insulation Dimmable Driver Options | Description | **Number of |
fittings**
---|---|---
DXDUACC700 12W| 7-12W| 3-4x R798
DXDUACC700 20W| 10.5-20W| 4-6x R798
DXDUACC700 30W| 15-30W| 6-9x R798
This luminaire must be installed by a qualified Registered Electrician to prevent damage to the luminaire and maintain electrical safety.
Installation Directions
- Switch off mains power supply
- Connect Driver to mains voltage cable (L, N)
- Carefully install downlight into pre-cut 50mm hole.
- Turn on mains power and switch on lighting circuit.
Approved Clearances
Note: 0mm required but 25mm always recommended for optimum product
lifespan through effective heat dissipation.
Example 1: 0mm Approved Height Clearance
Building element abutting rear, insulation abutting sides of fitting.
Example 2: 0mm Approved Side Clearance
Building element abutting side of fitting, insulation abutting and covering
fitting.
Driver should be installed above insulation unless using an Under Insulation
Driver (UID).
**CLASSIFICATION SHEET / IC
**
| Manufacturer / Supplier | Halcyon Lighting Ltd |
|---|---|
| Product Code | R798 |
| Product Type | LED Recessed Luminaire |
| Secondary Voltage | 700mA Constant Current DC |
| Wattage | 3W |
| Ingress Protection Rating | IP20 |
| Classification | | IC — building insulation that can safely be
continuously exposed to 90°C allowed to abut and cover the luminaire.
---|---|---
In the vicinity of the recessed luminaire, use an insulation product that: (a)
Maintains its dimensions and structural integrity when exposed to a
temperature of 90°C; and (b) Withstands a 30-second needle flame test carried
out in accordance with AS/NZS 60695.11.5 with the flame applied to all
surfaces of the sample.
Rear of fitting may abut structural members and building elements.
Do not Install through or directly into joist, beam, rafter or ceiling
batten.
Side Clearance from heatsink to building element (e.g. timber, joist or
batten)| SCB: 0mm
---|---
Height Clearance from heatsink to building element (e.g. timber, joist or
batten)| HCB: 0mm
Minimum insulation clearance to building element| MIC: 0mm
Recessed luminaires and their associated equipment may pose a risk of fire or
damage to property if not installed and maintained correctly. Halcyon
recommends a clearance of 25mm to building elements for optimum lifespan.
Halcyon IC rated luminaires are completely safe to install in sarked timber
ceiling linings. Halcyon accepts no responsibility if the timber used is not
treated correctly and dries out, crack or warps over time due to the constant
low heat from the aforementioned “IC Rated” LED recessed lighting.
This data sheet contains information necessary to ensure compliance with the
New Zealand Electrical Code of Practice for Installation and Maintenance of
Recessed Luminaires and Associated Equipment AS/NZS 60598.2.2:2001
Cutting of holes prior to receiving goods is entirely at the risk
of the installer.
10 Basalt Place. East Tamaki. Auckland.
PO Box 58-501, Botany. Manukau 2163.
Auckland. New Zealand Ph (0064 9) 273-9177
Fax (0064 9) 273 9155
Email: sales@halcyon.co.nz
Web: www.halcyonlights.co.nz
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>