poldina Engine MINI-14 Suspensions Table Lamps Instructions
- June 4, 2024
- poldina
Table of Contents
INSTRUCTIONS
SUSPENSIONS LAMPS TABLE LAMPS-FLOOR LAMPS
SUJECTION TO THE CEILING
CONNECTION TO THE NETWORK
CONNECTING CABLES TYPE Y: If the flexible cable or cord of the luminaire is damaged should be replaced only by the manufacturer, its service, or a similarly qualified person in order to avoid any risk.
PLACEMENT OF THE GLASS/SHADE
Low Pressure symbol: Only approved for operation using low-pressure bulbs
according to IEC 60 598-1.
A cracked safety glass lampshade must be replaced.
Smallest distance from illuminated surfaces (in m).
Technical data: see fixture label Ingles: This product contains a light source of the energy efficiency class G.
SAFETY INSTRUCTIONS
- Electrical appliances must only be connected by qualified persons.
- Important] Before starting installation work disconnect the main cable from the power supply – remove the fuse or turn the switch to «OFF». The power supply connection must be done with a suitable connecting box, as seen in the illustrations.
- The lamps with an index of protection 20 (IP20) cannot be used outdoors.
- Lamps marked with the symbol may not be installed on easily flammable surfaces such as: wood, or carpet.
- Do not attach lamps on surfaces that are damp, freshly painted, or otherwise electrically conductive.
- Connect the wires of the lamp with tee same colors as the wires of the wall or the cell. PE or = green/yellow = ground wire. N =blue=neutral wire. L=brown (black) = phase.
- Use the fixation system according to the weight of the lamp.
- Keep away the wires and connections from heat sources.
- Make sure that the wiring is not damaged during de drilling /fixing procedure.
- Be sure to always use the correct type of bulb (see information on the label).
- Keep these instructions in a safe place.
- Use the sleeves to cover the main supply wiring to the fitting.
- Cleaning is limited to the outer surfaces, shades or protective glass, reflectors, and covers. It is important to ensure that no moisture enters the terminal compartment or reaches any live parts). Gold and brass finishing lamps can be cleaned only with a soft cloth (do not use cleaning agents of any kind).
- Use low-pressure halogen lamps with low ultraviolet radiation (UV-STOP).
- Suitable only for indoor use, at 25°C.
EXPLANATION OF PROTECTION CLASSES:
Protection class I: This lamp has an earth terminal. The earth wire (yellow
and green) must be connected to the terminal indicated by the symbol.
**** Protection class II: This lamp is double insulated and must not be
connected to an earth wire.
All the technological LED lamps are constructed with Led systems that cannot
be replaced.
STAMP OF THE COMPANY
The manufacturer guarantees the proper functioning of this equipment. repairs
or spare parts of the model owing to faulty manufacture during 2 years after
the surrender date. Responsibility will not be accepted. however. for damages
or injury caused through misuse. For any claims, the sale ticket must be
presented The company agrees to repair any defect or malfunction found in the
item and any damages said defect or malfunction might directly provoque. If
the repair should fail to satisfy the customer and/or the object fail to
present the optimum condition for the use to which it is destined the
guarantee holder will have the right to the substitution of the acquired item
for another of identical characteristics or a complete refund of the purchase
price.
EN ESPANA C.I.F B-96498233 Camino Valencia,
104. 46190 RIBA-ROJA DEL TORIA (Valencia – Espana)
08/2021
Documents / Resources
|
poldina Engine MINI-14 Suspensions Table
Lamps
[pdf] Instructions
Engine MINI-14 Suspensions Table Lamps, Engine MINI-14, Suspensions Table
Lamps, Table Lamps, Lamps
---|---