Husqvarna Automower 550H EPOS Professional Robotic Lawn Mowers User Guide

: June 9, 2024
: Husqvarna

Table of Contents

Automower 550H EPOS Professional Robotic Lawn Mowers
Product Information: Robotic Lawn Mower
Product Usage Instructions
System overview
Installation
LED status indicators
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Automower 550H EPOS Professional Robotic Lawn Mowers

Husqvarna-Automower-550H-EPOS-Professional-Robotic-Lawn-Mowers -product-
image

Product Information: Robotic Lawn Mower

The EPOS system contains a robotic lawn mower, a charging station, and a reference station. The robotic lawn mower and the reference station receive satellite signals for positioning. The reference station sends correction data to the robotic lawn mower to get an accurate position. The work area is made virtually in an app by operating the product and adding waypoints to make a map in an app.

The robotic lawn mower has different colored lights to indicate its operation status:

Green constant light: In operation
Green flashing light: Paused
Red flashing light: Error
Yellow constant light: Stopped
Yellow flashing light: Waiting for PIN code
Blue pulsating light: Charging
White constant light: appDrive mode
White pulsating: Switching off/Firmware installation ongoing
White flashing light: Firmware update required

The reference station has different colored lights to indicate its operation status:

Green constant light: In operation
Green pulsating light: Startup
Red flashing light: Error
White flashing light: Firmware update required

The charging station has different colored lights to indicate its operation status:

Green constant light: Good charging station signal
Green flashing light: ECO mode
Red flashing light: Error in the charging station’s antenna

Product Usage Instructions

Ensure the reference station and the robotic lawn mower have unimpeded sky view to operate reliably without stops.
Install the reference station by referring to the Operator’s manual for the reference station.
Install the charging station.
Pair the robotic lawn mower with the app.
Pair the robotic lawn mower with the reference station in the app.
Pair the robotic lawn mower to the charging station.
The virtual boundary is set in the app by adding waypoints to make a map of the work area. The stay-out zone can also be set in the app to indicate areas where the robotic lawn mower should avoid.
The mobile device can be used to control the robotic lawn mower and monitor its status.
If using Husqvarna Fleet ServicesTM, it is a cloud solution that gives the commercial fleet manager an updated overview of all the products. This is available both as a web service and as an app.
For more information, refer to the Operator’s manual for the reference station and the Operator’s manual for the robotic lawn mower.

System overview

The EPOS system contains a robotic lawn mower, a charging station and a reference station. The robotic lawn mower and the reference station receive satellite signals for positioning. The reference station is stationary and sends correction data to the robotic lawn mower to get an accurate position for the robotic lawn mower. The work area is made virtually in an app by operating the product and adding waypoints to make a map in an app.

Navigation satellites
Satellite signals
Reference station
Correction data
Charging station
Virtual boundary
Stay-out zone
Work area
Mobile device
Docking point
Transport Path

For a complete map installation a work area and a charging station are necessary. A work area is an area where the product can operate and cut grass automatically. A work area is specified by virtual boundaries. The charging station can be put in the work area or near the work area that is connected to it with a transport path. A transport path is a specified path between the docking point and a work area. The product can operate automatically in this path, but does not cut grass. Stay-out zones can be made if there are areas where the product is not allowed to operate. A stay-out zone is specified by virtual boundaries. A maintenance point is a specified position where the product can be parked at.

Connectivity

a. Automower® Connect app is used for settings and daily operation of the product.
b. Husqvarna Fleet Services™ is a cloud solution that gives the commercial fleet manager an updated overview of all the products. This is available both as a web service and as an app.

Installation

The reference station and the robotic lawn mower need unimpeded sky view to be able to operate reliable without stops.

Install the Automower® Connect app and Husqvarna Fleet Services™ app to your mobile device. Download the apps from App Store or Google play.
Install the reference station. Refer to Operator’s manual for the reference station.
Install the charging station.
Pair the robotic lawn mower with the app.
Pair the robotic lawn mower with the reference station in the app.
Pair the robotic lawn mower to the charging station and it will specify the docking point in front of the charging station.
Specify the work area by operating the product clockwise with appDrive around the work area and adding waypoints on the map in the app.
Specify the stay-out zones by operating the product counter clockwise with appDrive around the stay out zone and adding waypoints on the map in the app.
Specify the transport path by starting in the work area and operate the product with appDrive and adding waypoints on the map in an app. When saving the transport path it is connected to the docking point.
Specify the maintenance point and make a path to the charging station. Start at the maintenance point and operate the product with appDrive to add waypoints on the map in the app. The path to the charging station is connected to the docking point when you save the maintenance point.
Use the app to adjust the schedule and the settings for the robotic lawn mower.