SOLAX DTSU666-D Three Phase DIN-Rail Meter Installation Guide
- June 9, 2024
- SOLAX
Table of Contents
SOLAX DTSU666-D Energy Meter User Manual
Please read this manual carefully before use.
Notes and Safety
Cut off all power of inverter before installation!
Wait for 5 minutes after power off.
Danger of high voltage!
Danger to life due to high voltage of this machine!
Introduction
➀ Basic features
DTSU666 Meter can achieve energy management together with solax three phase inverter. It applies to 80A system on below, measure the import, export and total power and energy.
➁ Terminals and Dimension
Only authorized personnel is allowed to set the connection.
Installation
➀ Mounting
DTSU666 meter is designed for indoor installation ,It could be installated on the wall or other place indoor.
➁ Wiring diagram
➂ Wiring Connection
Step 1: RS485 terminal connection
- Prepare a communication cable.
- Trip the insulation from the communication cable.
- Connect the meter communication cable and inverter with reference to the inverter manual.
- Connect the other end of the communication cable to the port 24 and 25 of meter. See the figure below for the connection.
Please note that the same color communication cable is used for the same communication port identier between the inverter and the meter.
PS:Thecolorofthecommunicationcableinthe figureisforreferenceonly.Pleaserefertothe actualsituationforthespecificconnection.
Step 2: Voltage wire connection
- Connect the port 1/4/7 of the meter to the grid terminal.
- Connect the port 3/6/9 of the meter to the load terminal.
- Connect the port 10 of the meter to the neutral wire.
LCD description
Warranty Regulation
Terms and conditions
SolaX grants a warranty of 12 months as standard. Starting from the date of
the purchase invoice marked. SolaX will only perform warranty service when the
faulty unit is returned to SolaX together with a copy of invoice and warranty
card which were issued by the dealer and manufacturer to the users. In
addition, the type label of the unit must be fully legible. If these
requirements are notfullle SolaX reserves the right for all warranty terms and
conditions.
Exclusion of liability
Warranty claims are excluded for direct or indirect damage due to:
- Use of unit in ways not intended, improper installation and installation that does not comply with standards, improper operation and unauthorized modification to the units or repair attempt.
- Without warranty card and serial number.
- Operating the units with defective protective equipment.
- Influence of oeign objects and force majeure.
- Inadequate ventilation.
- Violate relevant safety regulations.
To register your SolaX product, please mail this warranty card to:
ADD: Room 506 West Buliding A Sci. and Tech Park of Zhejiang University No.525, Xixi Road, Hangzhou Zhejiang Province, China 310007
Tel: +86 571 56260011 Fax: +86 571 56075753
Email: service@solaxpower.com
Web: http://www.solaxpower.com/
Online warranty registration is available at http://www.solaxpower.com/en /warranty-registration/
Warranty Registration Form
References
- SolaX Power: Solar Inverter, Battery System, EV Charger
- SolaX Power: Solar Inverter, Battery System, EV Charger
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>