SENTRY BT170 Bluetooth Headphones User Manual

SENTRY BT170 Bluetooth Headphones

Product Information BT170

The BT170 is a portable wireless speaker that comes with a built-in rechargeable battery. It can connect to devices via Bluetooth or through a 3.5mm audio cable. It also has a USB port for charging external devices.

• Wireless connectivity : Bluetooth
• Wired connectivity : 3.5mm audio cable
• Battery type : Rechargeable
• USB port : Yes

Product Usage Instructions

1. Charge the BT170 before first use by connecting it to a power source using the included USB cable.
2. To connect via Bluetooth, turn on the speaker and put it in pairing mode by pressing and holding the Bluetooth button until the indicator light flashes. Then, search for available devices on your phone or other Bluetooth-enabled device and select “BT170” to pair. If you prefer a wired connection, plug one end of the included 3.5mm audio cable into the speaker and the other end into your device’s headphone jack.
3. You can use the BT170 to charge your phone or other USB-powered device by connecting it to the USB port on the speaker.
4. The speaker controls include volume up/down, play/pause, and skip forward/backward. You can also answer calls using the built-in microphone.

For more information or troubleshooting tips, please refer to the full user manual provided with your BT170 speaker.

Bluetooth Headphones

Specifications

• Driver Unit : 40mm
• Impedance : 32 ohms
• Sensitivity : 100dB+/-3dB
• Cord Length : 4ft./1.2M
• Frequency : 20Hz-20KHz
• Battery : Lithium-ion
• Communication system : Bluetooth Specification version 5.1
• Battery Capacity : 15omAh
• Operating Temperature : 0 °C to 40 °C
• Radio Frequency : 2.402 GHz-2.480 GHz

Note: Playback and charge times mentioned are approXimate and based on earbuds and case being fully charged, and playback at 50% volume. Playback and charge times may vary and performance may be affected by multiple factors including but not limited to battery conditions, ambient temperature, listening volume. and/or distance from the source audio device. USB Type-c and USB-C® are registered trademarks of USB Implementers Forum.

Bluetooth Pairing/Connection:
Turn on the product. Bluetooth mode will be activated automatically. Enable bluetooth function on your media device. Search the bluetooth device named BIT70 .Click or tap to connect (pair). After successful Connection (pairing) you will hear a chime. Now you can play music, or use bluetooth phone functions.

Key Functions:

• On/Off : Press and hold the for 5 seconds to turn on/off.
• Music Pause : Press the button to pause playing, and press the again to resume playback.
• Volume Increase : Press and hold the button. Volume Reduction: Press and hold the button.
• Next Song: Press the button. Previous Song: Press the button.
• Answer/Hang-up : Press the button to answer when the call is incoming, and press it again to hang up.
• Rejection : Press and hold the button for about 2 seconds, then release it.

Warnings & Precautions

• CAUTION : To prevent electric shock, match the wide blade of the line cord plug to the wide slot of the AC receptacle. Insert the plug fully into the receptacle.
• WARNING : To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
• CAUTION : Use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation exposure.
• WARNING : Changes or modifications to this unit not expressly apprOved by the party responsible for compliance could void the user’s authority to operate the equipment.
• WARNING : Do not place the unit on top of any soft, porous, or sensitive surfaces to avoid damaging the surtace. Use a protective barrier between the unit and surface to protect the surface.
• WARNING : Use of this unit near fluorescent lighting may cause interference regarding use of the remote. If the unit is displaying erratic behavior move away from any fluorescent lighting, as it may be the cause.

Included Cables

1. 3.5mm (1/18) male to male AUX
   Plug one side of the aux cable into the headphone port and the other into your media device and use the headset while it is powered off. All Bluetooth functionality is disabled when you do this.

2. USBC,DC 5V USB
   To charge device:
   Plug the small side of the USBC cable into the usb charging port on your headset and plug the large end into usb port on a computer, or ac adapter (not included). BT170: when the product is charging, the LED light will keep in red color, when the product is fully charged, the red LED light will be off

Important Safety Instructions

1. Kead these Instructions.

2. Keep these Instructions.

3. Read all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturers instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiersthat produce heat.

9. Follow applicable laws and regulations for details for transport, shipping, and disposal of batteries. For details on recycling lithium, lithium-phosphate, and
   lithium-ion batteries, please contactagovemment recycling agency, your waste dispOsal service, or visit reputable online recycling source such as www.batteryercycling.com

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/ accessories speciied by the manutacturer.

12. Unplug this apparatus during lightning storms or when unused for long periods oftime.

13. Refer all servicing to qualiied service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cordor plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate nomally, or has been dropped.

14. Headlphones are capable of producing soundl levels which can be hamful to your hearing. Do not listen at high volume for prolonged periods of time.

Headphones may block out surrounding sounds. Never wear headphones while operating a vehicle. Use with caution. User assumes all risks associated with the use of this product.

Charging your device

Only use a power adapter with applicable country regulations and international and regional safety standards. Other power adapters may not meet applicable safety standards, and using such adapters cOuld pose a risk of death or injury. Avoid prolonged skin contact with the charging cable and connector when the charging cable is connected to a power source because it may cause discomfort or injury. Sleeping or sitting on the charging CaDie or connector should be avoided.

WARNING : To prevent possible hearing damage, do not listen at high volume levels for long periods. For traff.c safety, do not use earphones while driving or cycling. if you have a pacemaker r other electrical medical devices, you should consult yoOur physician before using the product

Choking hazard : The product, packaging and some of the included accessories may present a choking hazard to small children. Keep these accessories away from small children. The bags themselves or the many small parts they contain may cause choking if ingested.

Danger : Improper battery replacement may cause an explosion and injury.

90-Day Warranty

Sentry warrants this product to be free from defects in materials and workmanship for 90-days from the date of original purchase. This warranty does not pertain to damage resulting from accident, abnormal use, misuse Gt neglect. Any defective product will be replaced if returned to an authorized Sentry dealer or to Sentry directly P.O. Box 885, One Bridge St. Hillburn, NY 10931. Please enclose a check for $5.00 for shipping & handling.

FCC ID: 2ACP4BT170 Model#BT170
The Bluetooth®word mark and logos are registered trademarks owned by Bluetooth SIG,Inc. and any use of such marks by Sentry Industries Inc is under license. Other trademarks and trade names are those of their respective OwnerS. Sentry Industries inc declares that radio equipment BT170 is in compliance with Directive 2014/53/EU.The EU declaration of confirmity is available at https://sentryindustries.com/european-declaration-of-conformity/ Confirmity with DirectivesThis product is CE marked to denote conformity with Directives 73/23/EEC (low voltage) and 89/336/EEC  (Electromagnetic Compatibility), as amended.Environmental Protection Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice.

• Supplier’s Declaration of Conformity 47 CFR 47 CFR Part 15.21, 15.105(b)
• Compliance Information
• Sentry Bluetooth Earphone and Headphone
• Responsible Party
• Sentry Industries lnc
• One Bridge street, Hillburn, NY 10931
• Tel+1 845 753 2910

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful nterference, and (2) this device must accept any interference received, induding interference that may cause undesired operation.

NOTE :This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against hamful interference in a residential installation. This equipment generates, usęs and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio Communications. However, there is no guarantee that interference will not occur in a particular installation. lfthis equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interterence by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an Outlet on a dircuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/IV technician for help

Warning : Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>