AOC AS600 BT Speaker Instructions
- June 9, 2024
- AOC
Table of Contents
AOC AS600 BT SpeakerAS600 BT Speaker
AOC Product User Manual
Product Information
The product is designed and manufactured with high-quality materials and components, which can be recycled and reused. The product is covered by European Directive 2012/19/EU.
Product Safety
Before using the product, read and understand all instructions in the user manual. Failure to follow the instructions may cause damage to the product, and the warranty will not apply.
Important Safety Instructions
- Follow all safety measures and precautions provided by the manufacturer.
- Use only microfiber cloth to clean the product.
- Dispose of your old product and battery following the guidelines in the user manual.
Battery Safety Precautions
The battery of the product must be handled with care. In case of any damage or leakage, do not touch it with bare hands. Follow the instructions given in the user manual to dispose of the battery properly.
Product Usage Instructions
To use the product, follow the instructions given below:
- Read and understand all instructions in the user manual.
- Charge the battery of the product completely before use.
- Use only microfiber cloth to clean the product.
- If you face any issue with the product, refer to the troubleshooting section in the user manual.
- Dispose of your old product and battery following the guidelines in the user manual.
Read and understand all instructions before you use your product. If damage is caused by failure to follow instructions, the warranty does not apply.
Safety
important Safety Instructions
- Make sure that the power supply voltage corresponds to the voltage of the unit
- Ihe speaker shall not be exposed to dripping or splashing.
- Do not place any SOurce of danger on the speaker (e.g. liquid filled objects, lit candles).
- Make sure that there is enough free space around the speaker for ventilation.
- Please use the speaker safely in an environment with temperature between 0°C and 45°C.
- Only use attachments and accessories specified by the manufacturer.
Battery safety precautions
- Danger of explosion if a battery is incorrectly replaced. Replace only with the same or equivalent type.
- A Battery (battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
- A battery in extreme high or low temperatures during use, storage or transportation, and low air pressure at high altitude can pose safety hazards.
- Do not replace a battery with an incorrect type that can defeat a safeguard (for example, some lithium battery types)
- Disposing a battery into fire or a hot oven, mechanically crushing or cutting a battery can result in an explosion.
- Leaving battery in an extremely high temperature surrounding, or an extremely IoW air pressure environment may result in an explosion or leakage of flammable liquid or gas.
Warning
- Never remove the casing of this speaker.
- Never lubricate any part of this speaker.
- Place this speaker on a flat, hard and stable surface.
- Never place this speaker on other electrical equipment.
- Only use this speaker indoors. Keep this speaker away from water, moisture and liquid-filled objects.
- Keep this speaker away from direct sunlight, naked flames or heat.
- Risk of explosion ifa battery is replaced by an incorrect type.
Care for your product
- Use only microfiber cloth to clean the product.
Care of the environment
Disposal of your old product and battery
Your product is designed and manufactured with high quality materials and
components, which can be recycled and reused.
This symbol on a product means that the product is covered by European
Directive 2012/19/EU.
This symbol means that the product contains batteries covered by European
Directive 2013/56/EU which cannot be disposed of with normal household waste.
Inform yourself about the local separate collection system for electrical and
electronic products and batteries. Follow local rules and never dispose of the
product and batteries with normal household waste. Correct disposal of old
products and batteries helps prevent negative consequences for the environment
and human health.
All unnecessary packaging has been omitted. We have tried to make the
packaging easy to separate into three materials: cardboard (box), polystyrene
foam (buffer) and polyethylene (bags and protective foam sheet).
Your product consists of materials which can be recycled and reused if
disassembled by a specialized company. Please observe the local regulations
regarding disposal of packaging materials, exhausted batteries and old
equipment.
Declaration of conformity
This product complies with the radio interference requirements of the European community. Hereby, TP Vision Europe B.V. declares that the product is in compliance with the essential requirements and other relevant provisions of RED Directive 2014/53/EU and UK Radio Equipment Regulations SI 2017 No 1206. You can find the Declaration of Conformity on https://aoc.com.
FCC Information
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limitS are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference
to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measuresS
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
IC-Canada: CAN ICES-003(B)/NMB-003(B)
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s license-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
FCC &IC Radiation Exposure Statement
This equipment complies with FCC and Canada radiation exposure limits set
forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm
between the radiator and your body.
This transmitter must not be co-located or operated in conjunction with any
other antenna or transmitter.
WARNING
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>