LOLA LYKKE NaturalFlow Baby Bottle User Manual
- June 9, 2024
- LOLA LYKKE
Table of Contents
NATURALFLOW
BABY BOTTLE
14350:2020
Children’s Drinking Equipment
Safety Certification
Instruction for use
- Clean before fi rst and after each use.
- Before fi rst use separate all parts and place them in boiling water for 5 minutes. This is to ensure hygiene.
- Inspect before each use and pull the feeding nipple in all directions. Throw away at the first signs of damage or weakness.
- To ensure proper cleaning/sterilising all bottle parts must be disassembled.
- Cleaning/sterilising while assembled can damage the bottle itself or the plastic components.
- Dishwasher safe on top dishwasher rack (max. 65°C / 149°F) but food colourings may discolour components.
- Do not use abrasive cleaning agents. Only soft bristle brushes or soft sponges should be used. Hard scourers may scratch the plastic and nipple teats.
- Sterilise using one of the following methods: steam sterilising (electric or microwave according to manufacturer’s instructions), boiling in water for at least 5 minutes or liquid sterilising solution.
- Do not leave single bottle parts in direct sunlight or heat, or leave in sterilising solution for longer than recommended, as this may aftect the product function.
- The bottle is made of polyphenylsulfone, a medical grade plastic, which is hygienic, hard-wearing, and easy to clean. Avoid any heavy pressure on it, as this could aftect the function.
- All parts should be completely dry before reassembly.
- Store nipples and valves in a dry sealed container.
- Do not use pin or sharp object to enlarge feeding hole of nipple.
- Do not leave single bottle parts in direct sunlight or heat.
- Always use only Lola&Lykke teats with the Lola&Lykke bottles.
- Use sugar free food or liquids only.
- Do not let baby self-feed.
- Do not put your baby to bed with bottle. Prolonged contact with liquids may cause severe tooth decay.
- To avoid injury, do not let baby walk with bottle.
HEATING INSTRUCTIONS:
- Remove the protective cap and nipple before heating
- Place in a bottle warmer, under hot running water or in a container of heated water.
- Heating bottle contents in a microwave is not recommended as the contents may overheat.
- Stir thoroughly after heating to evenly distribute heat. Allow the standing time recommended by the bottle warmer manufacturer and test the temperature before serving.
- Wrap cloth or towel around bottom of bottle and wipe to absorb any excess water after warming in a bottle warmer or boiling water.
- Do not overheat as this may damage the bottle.
- NEVER pour boiling water into the bottle.
- NEVER heat or cool a sealed bottle.
- NEVER place bottle in heated oven.
CAUTION – For your child’s safety and health!
- Always use this product with adult supervision.
- Never use feeding nipples as a soother.
- Continuous and prolonged sucking of fl uids will cause tooth decay.
- Always check food temperature before feeding.
- Keep all components not in use out of the reach of children.
ADDITIONAL INSTRUCTIONS:
- The bottle should only be placed on solid and fl at surfaces.
- When using multifunctional devices pay attention to the instructions of the manufacturer.
- When using a microwave sterilizer, always set the microwave to the correct power and time.
- Use caution when dealing with sterilised products as they may still be hot.
- Wash hands before using sterilised products.
- Always store the bottle dry.
- Do not wash bottle after sterilising.
- Do not touch the nipple after sterilising. Handle nipple by using the screw ring.
- Operating temperature: -20°C min. 180°C max.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>