LOLA LYKKE Natural Flow Nipple Teats Instruction Manual
- June 9, 2024
- LOLA LYKKE
Table of Contents
Natural Flow Nipple Teats
Instruction Manual
Lola&Lykke® Natural Flow Teats
Contents of pack: 2 teats to use with Lola &Lykke bottle.
Material: Silicone.
Instruction for use
Fill with the required amount of liquid and tighten the screw cap.
If heating food in the microwave, do not seal the bottle. Shake well before
use and always check temperature before offering to baby. Unevenly heated food
may burn baby’s mouth. Before first use, clean the product. To ensure product
hygiene, put the teat in boiling water for 5 minutes before use. When carrying
a full bottle, make sure it is closed with the cover in place, taking care to
position the teat in the centre of the cover to activate the “spill-proof”
function of the product.
Cleaning: Before initial use, place the product in boiling water for 5
minutes, allow to cool, and thoroughly rinse all bottle components. This is to
ensure hygiene.
Subsequently, the teat can also be washed in the upper rack of a dishwasher
and can be sterilised both in the microwave and using a special sterilising
machine. Clean before each use.
Assembly: Once thoroughly dry, insert feeding teat through the top of the
screw cap collar. Attach the screw cap collar securely onto the bottle neck.
Precautions: When not in use, store in a dry and covered place.Always use
this product with adult supervision. Do not clean or allow to come into
contact with solvents or harsh chemicals as this may damage the teat. Do not
leave the product in direct sunlight or heat, or leave in disinfectant
(“sterilizing solution”) forlonger than recommended.
For your child’s safety and health
Warning
Always use this product with adult supervision. Never use feeding teats as a
soother. Continuous and prolonged sucking of fluids will cause tooth decay.
Always check food temperature before feeding. Keep all components not in use
out of reach of children. Do not leave the baby alone with drinking equipment
due to the risk of choking, the baby falling over or if the product has
disassembled.
Warning
Tooth decay in young children can occur even when non-sweetened fluids are
used. This can occur if the baby is allowed to use the bottle/cup for long
periods throughout the day and particularly during the night, when saliva flow
is reduced or if it is used as a soother. Do not leave the teat in direct
sunlight or heat, or leave in disinfectant (“sterilising solution”) for longer
than recommended, as this may weaken the teat. Inspect beforeeach use. Throw
away at the first sign of damage or weakness. Replace the teat every 6 weeks,
for safety and hygiene reasons.Pull the feeding teat in all directions to
check the product.
Attention
Some juices and sterile solutions may make the silicone become opaque. This
does not modify any of its properties. Heating in a microwave oven may produce
localized high temperatures. Take extra care when microwave heating. Always
stir heated food to ensure even heat distribution and test the temperature
before serving. Operating temperatures: -50°C min. 200°C max.
Warning
Packaging materials are not part of the product. For your child’s safety,
please remove and discard all packaging materials prior to use but read and
retain the instructions for future reference.
Lola &Lykke Oy Konepajankuja 1 00510
Helsinki Finland
NIPPLE TEATS
INSTRUCTION FOR USE
EN 14350:2020
Children’s Drinking Equipment
Safety Certification
Documents / Resources
| LOLA
LYKKE Natural Flow Nipple
Teats
[pdf] Instruction Manual
Natural Flow Nipple Teats, Flow Nipple Teats, Nipple Teats, Teats
---|---