Hanwha Techwin SBP-300HMW8 Hanging Mount Adaptor User Guide
- June 9, 2024
- Hanwha Techwin
Table of Contents
Hanwha Techwin SBP-300HMW8 Hanging Mount Adaptor
Package
-
HANGING MOUNT ADAPTOR
-
SCREW(M4xL10) 2EA
-
SCREW(M4xL14) 2EA [For XND-6080/8080 Series]
Product Overview
This product is used to install the Plastic Camera into the Wall Mount Adaptor (SBP-300WM or SBP-300WM1), Ceiling Mount Adaptor (SBP-300CM) or Parapet Mount Adaptor (SBP-300LM).
Installation Precautions
- Make sure that the installation place can endure at least 4 times of the total weight of the Hanging Mount Adaptor, Camera, and Wall/Ceiling/Parapet Mount Adaptor.
- ` The Hanging Mount Adaptor can be also connected to 1-1/2” PF screw-thread pipe as well as to the Wall/Ceiling/Parapet Mount Adaptor.
Installation
Insert the Hanging Mount Adaptor to 1-1/2″ PF screw-thread (female) pipe or to the Wall/Ceiling/Parapet Mount Adaptor (SBP-300WM or 300WM1/300CM/300LM) and turn it clockwise to secure to the Pipe or Adaptor.
-
Make sure you fix the Pipe or Adaptor so that it reaches to the end of the 1-1/2” PF screw thread on the Hanging Mount Adaptor. If not secured tightly, the Hanging Mount Adaptor may loosen from the Pipe or Adaptor, causing physical damage or malfunction.
(Make sure you check the connection between two components before proceeding with the next step.) -
Install the Hanging Mount Adaptor onto the camera.
Make sure you insert the Adaptor in the right direction
-
Make sure you insert the Adaptor in the right direction
-
Perform assembly in accordance with the bottom shape of the camera to assemble
-
A type / Representative Model : SND-6084
-
B type / Representative Model : PND-0809R-00
Product Specifications
- Weight : 178g
- Material : Aluminum
- Operation temp. : -50°C~60°C
- Operation hum. : 0~100%
Product Outline
