Hanwha Techwin SBP-300CMW Ceiling Mount Adaptor User Guide
- June 9, 2024
- Hanwha Techwin
Table of Contents
Hanwha Techwin SBP-300CMW Ceiling Mount Adaptor
This product is used to install the Smart Dome Camera and Anti Vandal Camera on a concrete ceiling.
Installation Precautions
- Make sure that the installation place can endure at least 4 times of the total weight of the Ceiling Mount Adaptor, Wall Mount Adaptor, Hanging Mount Adaptor, and Camera.
- This product is designed to use M10 Anchor Bolts (Nuts) for the installation.
- For a concrete wall, it is recommended to use M10 Anchor Bolts (Nuts) along with plain and spring washers.
- Each anchor bolt to use must be capable of withstanding an extraction force of 700 kg.
- When installing the product outdoors, use interlocking devices made of stainless steel.
Installation
- Pull out the external power cable, BNC cable and communications cable (for connecting to the “Camera”) through the rear of the Ceiling Mount Adaptor into the pipe.
- Then, it is recommended to keep the cables in a distance of about 100 mm from the pipe
- Mark and drill 4 holes into the Ceiling Mount Adaptor and insert the Anchor Bolts or Nuts (M10).
- Secure the Ceiling Mount Adaptor onto the ceiling using the “Anchor Bolts or Nuts (M10)”
- Mount the Camera set on the Pipe.
- Install the camera according to the camera’s installation guide
Product Specifications
- Weight: 700g
- Material: Aluminum
- Operation temp: -50°C~60°C
- Operation hum: 0~100%
Product Outline
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>