Vortex T10M Tablet User Guide
- June 9, 2024
- VORTEX
Table of Contents
Vortex T10M Tablet
Product Information
The T10M is a tablet device manufactured by Vortex. It has a single SIM card slot and an SD card slot for storage expansion. It features a Hex-Vision image volume button for adjusting the volume or muting incoming calls and a power button for turning on the device or the screen.
Sim Card Instructions
To use the T10M with a SIM card, follow these instructions:
- Insert a Micro-SIM card with the chip facing down.
- Ensure that the SIM card is not hand-cut and is a standard Micro-SIM card.
- Do not insert or remove the SIM card while the tablet is turned on.
- Choose which SIM card slot to be the main one for the 4G network via Settings > SIM Card.
SD Card Instructions
To use an SD card with the T10M, follow these instructions:
- Insert the SD card into the device with the metal contacts facing down and be aware of the direction of the cut edge.
- Turn off the tablet before changing or replacing the SD card.
- The SD card does not come with the tablet and needs to be purchased separately.
Network Connection Instructions
To connect to a network, follow these instructions:
- To connect to Wi-Fi, go to Settings > Network & Internet > Wi-Fi and select your desired network from the list. Enter the password if required and click Connect. When connected, it is ready to use.
- To connect to a Bluetooth device, go to Settings > Connected devices > Bluetooth and enable Bluetooth, then click Refresh to search for available devices. Select the device you want to pair with and click Pair.
Camera Instructions
To use the camera, follow these instructions:
- Aim the camera at the object to be shot, or click on the screen to focus on a specific object.
- Click on the Capture icon to take photos or choose other modes such as video recording, beautifying, or panorama to take photos/videos.
Security Information
- Customizing the operating system may cause the device or some applications to fail to work properly. Vortex holds a disclaimer for the performance problem or incompatibility caused by third-party applications, registry editing, or OS software modification. Please prevent the device or the battery from extreme cold/hot conditions as it may lead to the deformation of the tablet and reduce the charging capacity and battery life.
PRODUCT HEX-VISION IMAGE
VOLUME BUTTON: Short press to adjust the volume or to mute incoming calls
.
POWER BUTTON: Long press to turn on the device; When the device is on, short press the Power Button to shut down or turn on the screen.
CARD INSERT MANUAL
Insert Micro-SIM Card
Insert a Micro SIM card. Insert the Micro-SIM card with the chip facing down.
Note the direction of cutting a Micro-SIM card into a slot.
Reminder:
Please use a standard Micro-SIM card . Please don’t use a nonstandard card
that is hand-cut
TF Card installation
- Please place the metal contact of the TF card down, and be aware of the direction of the cut edge. Insert the card directly into the device.
Reminder:
- Please turn off the tablet before changing or replacing the TF card.TF card does not come with the tablet please purchase separately.
- Do not insert or remove the sim card when the tablet is turned on.
SIM MANAGEMENT
- Please choose which SIM card slot to be the main one to be for the 4G network via Setting > SIM Card.
- Choose your preferred network types of 4G/3G/2G via Setting > Network & internet>Mobile network Preferred network type.
NETWORK CONNECTION
Connecting WIFI
- Into the setting of WIFI via Settings > Network & lnternet > Wi-Fi When WIFI is on, a list available WiFi connection will appear.
- Click on the one you want to connect to, enter the password if the network is encrypted, then click Connect .When it’s a public network,just click
- Connect When the network shows “connected”, it is available to use .
Bluetooth Function
- Into the setting of Bluetooth function via Settings > Connected devices > Bluetooth Enable the Bluetooth function by clicking the Menu Button then select “Refresh”, then the tablet will search for available Bluetooth devices for pairing and list on the screen. Click on the one you want to pair with ,then click “Pair “on the dialog pop-up.
- Documents are available for transmission after Bluetooth pairing .
Reminder :
- Slide down the status bar to open the shortcut switches for Bluetooth and other functions.
WIFI Hot-spot Setting
-
- Click on via Settings > Network & tethering > Wi-Fi hotspot to turn on the Portable WIFI Hot-spot functiong .
- When setting up WIFI hot-spot , enter your user name in “Network Name”and password ,then click Save .Another device password of the password .
Reminder :
- Please enable the Data Connection before enabling the network sharing function. Your mobile traffic will be shared by other devices, so please use it carefully .The signal of the WIFI hot-spot depends on the signal strength and devices .
CAMERA
Aim the camera at the shooting object, the tablet will start focus
automatically ; or you can click on the screen to choose the object you want
to focus on, then click ” Capture” icon to take photos . You can also choose
other modes such as video recording
,beautifying , panorama to take photos/videos.
INSTRUCTIONS FOR SIM-CARD &SD Card
- The Device is equipped with a Single Sim card slot and SD card slot . Its not a device with Dual SIM card
SECURITY INSTRUCTIONS
- Security information (including BS, ES, battery securityinformation)of third-party software installation and function may vary in different regions or by different hardware specifications. Vortex holds disclaimer for the performance problem or incompatibility caused by third-party applications, registry editing OS software modifying .Customizing the OS may cause the device or some applications fail to work properly.
- Please prevent the device or the battery in extreme cold/hot condition. Then extreme temperature will lead to deformation of the tablet and reduce the charging capacity and battery life.
- Please only use the custom designed and approved battery and charger by Vortex. lncompatible battery and chearger may cause damage to the tablet . Please abide by local regulation when disposing of the used batteries and tablet.
- Please do not place the battery or the tablet onto or inside heating devices such as microwave, oven or radiator. The battery may explode if it gets too hot.
- Please do not crush or pierce the battery . Prevent the battery from getting high pressure from outside , it may cause internal short and overheating .
SPECIFICATIONS
BASIC INFORMATION
- Model T10M
- Operating System Android™ 12
- CPU Arm-Cortex A53 MPCoreTM /2.0Ghz
- GPU IMG PowerVR GE8300
- RAM 4GB
- ROM 32GB
- Battery 5000mAh
Display
- Screen Size 10.1 inch
- Resolution 1280*800 Pixeis
- Touch Capacitive multi-touch
Cameras
- Rear Camera
- Front Camera
- 5MP Camera
- 8MP Camera
Connection(I/O)
- Band GSM: B2/3/5/8
- WCDMA: B2/4/5/8
- FDD: B2/3/4/5/7/12/13/17/25/26/28A/28B/66/71
- TDD: B41Full
- SIM/TF card 1 Micro SIM Card and 1 TF Card
- WiFi IEEE802.11 a/b/g/n/ac
- Bluetooth Bluetooth 5.0
- GNSS GPS
- FM YES
- Earphone Port 3.5mm
- USB Port Type-C USB
Other Features
- Video File Format 3GP/MPEG4,etc
- Audio File Format WAV/MP3/AAC/AMR/MIDI/APE/WMA,etc
- Card Extend Support TF card up to 256 GB
- Language Support Multi-language
- Sensor G-Sensor,Gravity sensor,Compass.
In the box
- **1*** tablet
- **1*** Type-c Cable
- **1*** Power Adapter
- **1*** Quick Start Guide
FCC
Caution
- Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
- This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
ISEDC Warning
- Operation of 5150-5250 MHz is restricted to indoor use only. This device complies with Innovation, Science, and Economic
- Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
- Specific Absorption Rate (SAR) information SAR tests are conducted using standard operating positions accepted by the FCC/ISEDC with the phone transmitting at its highest certified power level in all tested frequency bands, although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. Before a new model phone is a available for sale to the public, it must be tested and certified to the FCC/ISEDC that it does not exceed the exposure limit established by the FCC/ISEDC, tests for each phone are performed in positions and locations as required by the
- FCC/ISEDC. For body-worn operation, this model phone has been tested and meets the FCC/ISEDC RF exposure guidelines when used with an accessory designated for this product or when used with an accessory that contains no metal and that positions the handset a minimum of 10mm from the body. Non-compliance with the above restrictions may result in violation of RF exposure guidelines.
For body-worn operation, this device has been tested and meets the FCC/ISEDC
RF exposure guldellnea when used with a leather case. The users must use this
leather case. Use of other leather caae may not ensure compliance with
FCC/ISEDC RF exposure guidelines.
In all EU member states, operation of 5150-5250 MHz is restricted to indoor use only.
Absorption Rate (SAR) information:
- This device meets the government’s requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluations of scientific studies.
- The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health.
FCC RF Exposure Information and Statement
- The SAR limit of USA (FCC) is 1.6 W/kg averaging over one gram of tissue. This device was tested for typical body-worn operations with the back of the device kept 10mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain an appropriate separation distance between the user’s body and the back of the device. Belt clips, holsters, and similar accessories should not contain metallic components in their assembly.
- The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements and should be avoided. Use only the supplied or approved antenna.
Documents / Resources
|
Vortex T10M
Tablet
[pdf] User Guide
T10M, 2ADLJ-T10M, 2ADLJT10M, T10M Tablet, Tablet
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>