Ensto ECO16BT-IN-WW Floor Heating Thermostat User Guide
- June 9, 2024
- ENSTO
Table of Contents
Ensto ECO16BT-IN-WW Floor Heating Thermostat
Product Information
Quick Guide Floor Heating Thermostat
The Quick Guide Floor Heating Thermostat comes in two models ECO16BT-IN-WW and ECO16BT-IN-SW. It has a switch that turns the power on and off, LED indicators that show if the thermostat is on and if the heating is on, a Bluetooth button for pairing and resetting the device, and an adjustment knob for changing the temperature. The thermostat is produced by Ensto Building Systems Finland Oy.
Product Usage Instructions
- To turn the power on, slide the switch down, and to turn it off, slide the switch up.
- The LED indicator B will be green if the thermostat is on and the heating is off, and will be red if the heating is on.
- The LED indicator C will flash blue during Bluetooth pairing, will stay blue when the temperature change is activated, and will flash fast when resetting to factory defaults.
- The Bluetooth button is located under the adjustment knob. To pair the device, press and hold the button until the LED indicator C starts flashing blue. Release the button and follow the Bluetooth pairing instructions on your device. To reset the device to factory defaults, press and hold the button until the LED indicator C starts flashing fast.
- Use the adjustment knob to change the temperature. Turn it clockwise to increase the temperature and turn it counterclockwise to decrease it.
- If the blue and red LED indicator flashes alternately, this indicates a faulty floor sensor.
Please refer to the full user manual for more detailed information on usage and troubleshooting.
OVERVIEW
- A: Switch
- Down: power is on
- Up: power is off
- B: LED indicator B
- Green: the thermostat is on and the heating is off
- Red: the heating is on
- C: LED indicator C
- Blue flashing: Bluetooth pairing is in progress
- Blue static: temperature change is activated
- Blue flashing fast: resetting to factory defaults
- D: Bluetooth button is under the adjustment knob (E)
- E: Adjustment knob
- Turn clockwise: the temperature rises
- Turn counter-clockwise: the temperature drops
Note
- Blue and red LED indicator flashes alternately: faulty floor sensor
Ensto Building Systems Finland Oy | Ensio Miettisen katu 2 | P.O.Box 77 | 06101 Porvoo, Finland | tel. +358 204 76 21 | buildingsystems@ensto.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>