SOG Toilet Ventilation Door Kit Instruction Manual
- June 9, 2024
- SOG
Table of Contents
Technology instead of chemicals!
Toilet Ventilation Door Kit
Instruction Manual
Operating and Maintenance Intructions
SOG® + SOG®II – Type 320S | for all Dometic Saneo Before removing the
cassette, the hose must be pulled off the green hose connector. Attach the
black plug to the hose connector (green). Pull out the cassette and dispose of
it appropriately. Insert cassette, pull off plug (black), and attach the
extractor hose onto the hose connector (green). If you want to change a second
cassette, then you can carry the full cassette in the storage space for
several days. (There is no longer any gas formation if the cassette is full)
Only by door version: Change the filter once a year! Completely unscrew
the 2 crosshead screws at the bottom. Push the cover cap up a little and
remove at the front. Take out the filter and insert a new filter into the
existing fitting. Place cover on the top – pull it forwards slightly at the
bottom. Push the cover from top to bottom so that it locks into place. Screw
in screws and ① tighten slightly. Apply a light pressure on the cover while
doing so.
Only by floor version: Change the filter once a year!
-
Before changing the filter, pull the fan out of the rubber sleeve in the filter housing.
-
Since the filter cartridge push-fits into the pipe, twist it back and forth while pulling it upwards and out.
-
Insert the new filter cartridge into the pipe.
-
You must moisten the rubber sleeve before inserting the fan into the filter cartridge.
-
Insert the fan as far as it goes, twisting it back and forth.
By roof version: maintenance-free
Documents / Resources
| SOG
SOG Toilet Ventilation Door
Kit
[pdf] Instruction Manual
SOG Toilet Ventilation Door Kit, SOG, Toilet Ventilation Door Kit, Ventilation
Door Kit, Door Kit
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>