datavideo HBT-16 Hdbaset Receiver Box Instruction Manual
- June 9, 2024
- Datavideo
Table of Contents
HBT-16 HBase Receiver Box
Instruction Manual
HDBaseT
RECEIVER BOX HBT-16
HBT-16 HBase Receiver Box
Disclaimer of Product & Services The information offered in this instruction manual is intended as a guide only. At all times, Data video Technologies will try to give correct, complete and suitable information. However, Data video Technologies cannot exclude that some information in this manual, from time to time, may not be correct or may be incomplete. This manual may contain typing errors, omissions or incorrect information. Data video Technologies always recommend that you double check the information in this document for accuracy before making any purchase decision or using the product. Data video Technologies is not responsible for any omissions or errors, or for any subsequent loss or damage caused by using the information contained within this manual. Further advice on the content of this manual or on the product can be obtained by contacting your local Data video Office or dealer.
FCC Compliance Statement
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Warnings and Precautions
- Read all of these warnings and save them for later reference.
- Follow all warnings and instructions marked on this unit.
- Unplug this unit from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.
- Do not use this unit in or near water.
- Do not place this unit on an unstable cart, stand, or table. The unit may fall, causing serious damage.
- Slots and openings on the cabinet top, back, and bottom are provided for ventilation. To ensure safe and reliable operation of this unit, and to protect it from overheating, do not block or cover these openings. Do not place this unit on a bed, sofa, rug, or similar surface, as the ventilation openings on the bottom of the cabinet will be blocked. This unit should never be placed near or over a heat register or radiator. This unit should not be placed in a built-in installation unless proper ventilation is provided.
- This product should only be operated from the type of power source indicated on the marking label of the AC adapter. If you are not sure of the type of power available, consult your Data video dealer or your local power company.
- Do not allow anything to rest on the power cord. Do not locate this unit where the power cord will be walked on, rolled over, or otherwise stressed.
- If an extension cord must be used with this unit, make sure that the total of the ampere ratings on the products plugged into the extension cord do not exceed the extension cord rating.
- Make sure that the total amperes of all the units that are plugged into a single wall outlet do not exceed 15 amperes.
- Never push objects of any kind into this unit through the cabinet ventilation slots, as they may touch dangerous voltage points or short out parts that could result in risk of fire or electric shock. Never spill liquid of any kind onto or into this unit.
- Except as specifically explained elsewhere in this manual, do not attempt to service this product yourself. Opening or removing covers that are marked “Do Not Remove” may expose you to dangerous voltage points or other risks, and will void your warranty. Refer all service issues to qualified service personnel. 13. Unplug this product from the wall outlet and refer to qualified service personnel under the following conditions:
a. When the power cord is damaged or frayed;
b. When liquid has spilled into the unit;
c. When the product has been exposed to rain or water;
d. When the product does not operate normally under normal operating conditions. Adjust only those controls that are covered by the operating instructions in this manual; improper adjustment of other controls may result in damage to the unit and may often require extensive work by a qualified technician to restore the unit to normal operation;
e. When the product has been dropped or the cabinet has been damaged;
f. When the product exhibits a distinct change in performance, indicating a need for service.
Warranty
Standard Warranty
- Data video equipment are guaranteed against any manufacturing defects for one year from the date of purchase.
- The original purchase invoice or other documentary evidence should be supplied at the time of any request for repair under warranty.
- The product warranty period begins on the purchase date. If the purchase date is unknown, the product warranty period begins on the thirtieth day after shipment from a Data video office.
- All non-Data video manufactured products (product without Data video logo) have only one year warranty from the date of purchase.
- Damage caused by accident, misuse, unauthorized repairs, sand, grit or water is not covered under warranty.
- Viruses and malware infections on the computer systems are not covered under warranty.
- Any errors that are caused by unauthorized third-party software installations, which are not required by our computer systems, are not covered under warranty.
- All mail or transportation costs including insurance are at the expense of the owner.
- All other claims of any nature are not covered.
- All accessories including headphones, cables, and batteries are not covered under warranty.
- Warranty only valid in the country or region of purchase.
- Your statutory rights are not affected.
Three Year Warranty
- All Data video products purchased after July 1st, 2017 are qualified for a free two years extension to the standard warranty, providing the product is registered with Data video within 30 days of purchase.
- Certain parts with limited lifetime expectancy such as LCD panels, DVD drives, Hard Drive, Solid State Drive, SD Card, USB Thumb Drive, Lighting, Camera module, PCIe Card are covered for 1 year.
- The three-year warranty must be registered on Data-video’s official website or with your local Data video office or one of its authorized distributors within 30 days of purchase.
Disposal
For EU Customers only – WEEE Marking
This symbol on the product or on its packaging indicates that this product
must not be disposed of with your other household waste. Instead, it is your
responsibility to dispose of your waste equipment by handing it over to a
designated collection point for the recycling of waste electrical and
electronic equipment. The separate collection and recycling of your waste
equipment at the time of disposal will help to conserve natural resources and
ensure that it is recycled in a manner that protects human health and the
environment. For more information about where you can drop off your waste
equipment for recycling, please contact your local city office, your household
waste disposal service or the shop where you purchased the product.
CE Marking i s the symbol as shown on the left of this page. The letters “CE” are the abbreviation of French phrase “Conformity European” which literally means “European Conformity”. The term initially used was “EC Mark” and it was officially replaced by “CE Marking” in the Directive 93/68/EEC in 1993. “CE Marking” is now used in all EU official documents.
Introduction
The HBT-15 and HBT-16 are respectively the HDBaseT transmitter and receiver
with a maximum allowable transmission distance of 100 meters. The transmitter
allows transmission of up to 4K50/59.94/60 image quality video.
With the 56V power connected to one end of the HBT-16 HDBaseT receiver, the
HBT-16 will thus be able to power the transmitter by Power over Ethernet
(PoE). On the transmitter end (HBT-15), there is also a 12V/30W DC output
serving to supply power to backend devices.
HDBaseT connection between the transmitter and the receiver can be
established using a single Ethernet cable. In other words, HDMI video, DVIP
control commands and power (PoE) can be transmitted between the transmitter
and the receiver using just one Ethernet cable (CAT.6A).
Features
- Extends 4K50/59.94/60 video transmission up to 100m from HBT15 Transmitter Box to HBT-16 Receiver Box.
- Transmits video, audio, DVIP Ethernet control, RS-422/232 and PoE by a single Cat.6A cable
- 56V PoE Power supply from the HBT-16 Receiver end.
- 12V 30W DC output at the HBT-15 Transmitter Box end.
- Supports DVIP Control Protocol
- Supports RS-422/232 Control Protocol
System Diagram
Connections
Rear Panel
HDMI OUT
HDMI port for video output.
DVIP Port
Connects to Ethernet switch or router, serving as a communication port between
the network and the HBT-16 receiver. 
56V DC IN
56V DC power input connection
Power LED Indicator
ON: Power connected
OFF: Power disconnected
Front Panel
HDBaseT Port
Connects between HBT-15 transmitter and HBT-16 receiver using a CAT.6A
Ethernet cable.
Note: Visit https://hdbaset.org/hdbasetrecommended-cables/f or cable
recommendations.
RS-232/RS-422 Interface
The RS-232/RS-422 port connects HBT-16 directly to Data video’s camera
controllers such as RMC-180, RMC-300A or RMC-300C. Use the RS-232 or RS-422
custom cable to connect. See RS-232/RS-422 pinout for more information
about the respective cabling.
Use the DIP switch to select between RS-232 (00) and RS-422 (01).
RS-232/RS-422 Pinout
The camera controller can be connected to the HBT-16 Receiver box through the RS-232 or RS-422 interface using a custom Ethernet cable. The respective connection wiring schemes are shown below.
RS-232
RS-422
Dimensions
Specifications
Video / Audio
Input| HDBaseT RJ-45 x 1
Output| HDMI 2.0 x 1
Supported Resolutions| 2160p60/59.94/50/30/29.97/25 (4:4:4 8bits)
1080p60/59.94/50/30/29.97/25
1080i60/59.94/50
720p60/59.94/50
480i59.94
576i50
Control
DVIP Ethernet| RJ-45 x 1
RS-422 / RS-232| RJ-45 x 1
Power
DC IN| DC 56 V
Dimensions
L x W x H| 157 x 85 x 46 mm
Weight| 0.45 kg
Physical and Operating Environments
Operating Temperature| 0 – 40°C (32°F – 104°F)
Storage Temperature| -20 – 60°C (-4°F – 140°F)
Humidity| 10% to 80% (non-condensing)
HDBaseT Transmission Distance| Video transmission at
2160p60/59.94/50 for Up to 100m using the CAT. 6A Cable (lower resolutions are
also supported)
Service & Support
It is our goal to make your products ownership a satisfying experience. Our
supporting staff is available to assist you in setting up and operating your
system. Please refer to our web site
www.datavideo.com for answers to common questions.
support requests or contact your local office below.
Please visit our Website for latest manual update.
www.datavideo.com/product/HBT-16
All the trademarks are the properties of their respective owners.
Data video Technologies Co., Ltd. All rights reserved 2020
www.datavideo.com
Jan-17.2022
Ver: El
References
- HBT-16 4K HDBaseT Receiver Box | Datavideo | Datavideo | Professional end-to-end solutions provider for your live video production.
- HDBaseT Cables | Audio Visual Products
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>