PHILIPS 1746630V7 Hue Amarant White Color Outdoor Linear Light User Manual

June 4, 2024
Philips

PHILIPS 1746630V7 Hue Amarant White Color Outdoor Linear Light

PHILIPS
1746630V7 Hue Amarant White Color Outdoor Linear Light PRODUCT -
Copy

IN THE BOX

PHILIPS 1746630V7 Hue Amarant White Color Outdoor Linear
Light FIG 1

IMPORTANT SAFETY INSTRUCTIONS

  • Product appearance may vary from image shown

  • UL Listed Landscape Lighting System This lumina1re and power supply urnt Is intended for installation in accordance with the National Electncal Code and local code speaftcations Failure to adhere to these codes and instructions may result m senous m1ury and/or damage to the PSU and void the warranty These instructions do not purport to cover all details or variations in equipment. nor to provide for every possible contingency related to installation, operation, maintenance, or mounting situation Should speofic problems occur that are not addressed by these instructions. contact your Sales Representative or distributor for assistance
    SAVE THESE INSTRUCTIONS for future reference

  • Warning do not use an extension cord

  • The plug on the power supply urnt must be connected to a GFCI protected hooded flush type cover plate receptacle marked “Wet Location” while In use

  • Protect the wire by routing It In close proximity to the hght fitting, or next to a building structure such as a house or a deck

  • The landscape wire and connector can also be hidden under stone or buried under grass at a maximum depth of 6 inches (15.2 cm).

  • Phillps recommends a minimum depth of 4 inches when burying in the lawn to prevent damage from aerators or other lawn plugging equipment

  • Philips recommends not to bury the T-shaped connectors

  • Do not submerge luminaire or PSU in water

  • WARNING: Risk of Electric Shock Do not install power supply unit or luminaires wIthtn 10 feet (3 05 m) of a pool. spa or fountainPHILIPS 1746630V7 Hue Amarant White Color Outdoor Linear Light FIG 2

HOW TO SET

PHILIPS 1746630V7 Hue Amarant White Color Outdoor Linear
Light FIG 3 PHILIPS 1746630V7
Hue Amarant White Color Outdoor Linear Light FIG 4 PHILIPS 1746630V7 Hue Amarant White Color Outdoor
Linear Light FIG 5

HOW TO CONNECT

PHILIPS 1746630V7 Hue Amarant White Color Outdoor Linear
Light FIG 6 PHILIPS 1746630V7
Hue Amarant White Color Outdoor Linear Light FIG 7 PHILIPS 1746630V7 Hue Amarant White Color Outdoor
Linear Light FIG 8 PHILIPS
1746630V7 Hue Amarant White Color Outdoor Linear Light FIG
9

www.philips-hue.com/getstarted

Use only with Philips HUE 24V =-== SELV LED Power Supply!

PHILIPS 1746630V7 Hue Amarant White Color Outdoor Linear Light FIG
10

Signify North Amenca Corporation
200 Franklin Square Drive
Somerset, NJ 08873. USA
Signify Canada Ltd/Signify Canada Ltee.
281 Hillmount Road.
Markham. ON, Canada L6C 2S3
Questions or Comments / Questions ou commentaires · 1-800-555-0050
lmportado y/o distnbu1do en MeXico por.
Signify Mexico S A. de C V.
Av. La Palma N° 6-Col San Fernando,
La Herradura Hu1xquilucan
Edo De Mexico. CP 52784 – RF C PME-620620-E84
Centro de contacto
01-800-508-9000
© 2020 Signify Holding
All rights reserved PHILIPS 1746630V7 Hue Amarant White Color Outdoor Linear
Light FIG 11 PHILIPS
1746630V7 Hue Amarant White Color Outdoor Linear Light FIG
12

INSTRUCTION

PHILIPS 1746630V7 Hue Amarant White Color Outdoor Linear
Light FIG 13 PHILIPS
1746630V7 Hue Amarant White Color Outdoor Linear Light FIG
14 PHILIPS 1746630V7 Hue
Amarant White Color Outdoor Linear Light FIG 15

FEATURES

PHILIPS 1746630V7 Hue Amarant White Color Outdoor Linear Light
FIG 17

Signify North America Corporation
200 Franklin Square Drive
Somerset. NJ 08873, USA
Signify Canada Ltd./Signify Canada Ltee. 281 Hillmount Road,
Markham, ON, Canada L6C 2S3
lmportado y/o distribuido en Mexico por: Signify Mexico S.A. de C.V.
Av. La Palma N° 6-Col. San Fernando, La Herradura Huixquilucan
Edo. De Mexico,
C.P. 52784 – R.F.C. PME-620620-E84
© 2020 Signify Holding

Questions or Comments
1-800-555-0050
Centro de contacto 01-800-508-9000

www.philips.com/lighting www.philips- hue.com

4404 029 11882
Last update: 08/2020

SAFETY INSTRUCTION

The manufacturer,er advises the correct use of Luminaires (Ughting fixtures)! Therefore always follow these instructions to ensure correct and safe installation and functioning of the luminaire and keep it for future reference. Turn off electrical power at maln f\.lse or circuit breaker box before commencing installation, maintenance or repair. If in doubt, consult a qualified electrician or contact you · retail outlet. Ensure that you always.ys install the luminaire to the Local electrical code. Certain regulations indicate- that luminaires should be installed by a qualified electrician. Observe the correct color of the wiring before installation: white (N). black (L) and green or bare copper wire (Ground). Do not connect this lum1naire to a non-grounded electrical system. WARNING: Installing this fixture m a non-grounded electrical system could allow metal parts of the luminaire to carry electrical current if any wires or wire connections become broken or loose. Under this condition. anyoine coming in contact with the luminaire Is subject to an electric shock which could cause injury or death. Always use wire, nuts/connectors rated for the correct
gauge and number of wires used. CAUT1ION: Be certain that no bare wire strands are exposed outside of the wire nuts/connections (If applicable). Be careful not to damage or cut the wire Insulation (covering) during installation.

Do not permit wires to contact any sharp edges. Do not remove thermal insulation pad(s). Oo,lne so will result in increased temperatures and possible risk of fire. Maintain interior lighting with a dry cloth duster, do not use abrasives or solvents. Avoid liquid on all electrical parts. Always consider au the technical specifications of the luminaire.Venfy the stated icons on the ident1flcation label on the lumina1re and the icons that are shown in part A or your safety Instructions. ATTENTION: Below you will find all the explanations with numeric reference to the icons respectively in front oi these PART-B safety instructions. Applicable icons to your fixture are shown in PART-A safety instructions.

  1. This product should only be installed Indoors.
  2. The product is suitable for outdoor usage.
  3. Only suitable for dry locations.
  4. 51.Jitable for damp locations.
  5. Suitable for wet locations.
  6. Luminaire is suitable for base up mounting.
  7. Lum!name is suitable for base-down mounting.
  8. Luminaire is suitable for horizontal mounting.
  9. The luminaire is only suitable for fixing to the ceiling.
  10. The luminaire Is only suitable for fixing to the wall.
  11. The luminaire is suitable for fixing to the wall and to the ceiling.
  12. Always observe the minimum distance between the lamp and the surface being lit as indicated on the lcon.
  13. Free air space of at least 4 Inches must be kept between the tap of shade and the bottom of the canopy.
  14. immediate,ely , replace a cracked or broken safety glass, and use only manufacturer-approved parts.
  15. Strip the wire as Indicated In the diagram.
  16. Use heat-resistant cable for wtrins the lumina!re lnto the mains.
  17. MAX …. W: only use lamps suitable for this luminaire and keep within the maximum specified wattage.
  18. This product is not suitable for children under 14 years.
  19. The Luminaire has a ground conductor identified with green insulation or bare copper wire.
  20. The luminaire is only suitable for a lamp with built-in safety or a low pressure lamp. An extra safety glass is not necessary.
  21. The luminaire is equipped with a fuse. If the luminaire is out of order after the bulb has been replaced. the internal fuse has to be replaced If contact with the Internal wiring can be made during th;s operation, this should be done by a competent electrician.
  22. The luminalre can be used with a dimming circuiL Consult a qualified electrician for choosing the right type (especially important ror low voltage luminaires).
  23. The Luniinafre cannot be used with a dimming circuit
  24. The lumlnalre is dlmmable wl,th the supplied dimmer ONLY. Do not connect to an additional dimmer.
  25. The dlmm 1abillty features depend on the chosen lamp. More information on the dimmability features is avail.able in the information pack provided with the bulb.
  26. Lummaire with time and light setting options. Minimum and maximum wiU be shown in the (con in part A.
  27. The luminaire can be placed at a maximum of 20ft height
  28. To reach an optimal working, you have to place the luminaire on the height mentioned In the icon. The maximum and minimum reach of the detector is also mentioned in the icon in part A. 29)
  29. The standard active range of vision of the detector covers the Biven degrees mentioned in the Icon.
  30. Ensure that you don’t drill through electrical wires or any other obstruction in the wall or ceiling during installation!
  31. This luminaire contains in some places very hot parts,
  32. Product to be Installed by two people.
  33. To avoid corrosion, clean the lumlnaire a minimum of 2 times per year with a soft cloth and a neutral detergent. (4 times in coastal or industrial areas).
  34. The product is for indoor use only. Do not use in, wet locations, areas directly exposed to water or outdoors.
  35. The product ls ZigBee c,ertified. Zlgbee is an open standard for Indoor wtre’less communication. All Philips ZigBee Certified products can be connected with other Philips ZlgBee Certified products.
  36. Bluetooth · enabled product. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG. Inc. and any use or such marks by Signify is under license. Other trademarks and trade names are those of their respective owners. Hue Personal Wireless Lighting is a trademark owned by Signify Holding B.V. Please go to www.phllips-hue.com to learn more about Hue and how to use it.

FCC Rules

FCC and Canadian authorization to operate this device. The advanced interface module complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the folowing measures: Reorient or relocate the receiving antenna. Increase the separation between the device and receiver. Connect the device into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/television technician for help.

Wireless Specification: Wireless RF mode frequency band: 2400-2483.5 MHz Wireless communications protocol:
IEEE 802.15.4 Operating channels Zigbee: channels 11- 26 Operating channels Bluetooth: channels 0-39
LIMITED WARRANTY: Signify warrants that this device’s hardware components will be free from defects in material and workmanship for a period of two (2) years from the date of purchase, unless a different period is stated in or on the packaging of the product, based on up to 3 hours average working time per day/7 days per week, when used as directed (the “Warranty Period”). Notwithstanding the foregoing, the Warranty Period for all Energy Star- certified oroducts is three (3) vears from the date of purchase. This limited warranty .onlv applies to the hardware Components contained in tne onnginal packaging. Inis limiter

packaged or sold with the hardware components. Signify does not warrant that use of this device will be uninterrupted or error-free. If this device does not conform to this limited warranty, Signify will send you, at its election, a replacement device or refund your original price upon receipt of the returned device, register receipt and proof of purchase. Please call our toll- free number, 1-800-555-0050, or write to us (address indicated on the packaging) to find out how to return the device. This limited warranty does not cover devices subject to accident, neglect, abuse, misuse or acts of God. REPLACEMENT OR REFUND IS YOUR SOLE REMEDY. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE DURATION OF THIS LIMITED WARRANTY. LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IS HEREBY EXPRESSLY EXCLUDED. Some states and provinces do not allow exclusion of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state and province to province. This limited warranty is subject to, and may be superseded by, our End of Support policy to the extent Signify decides to terminate support for this device in accordance with its End of Support policy, available here:
www.philips-hue.com/endofsupportpolicy
Philips and the Philips Shield Emblem have registered trademarks of Koninklijke Philips N.V. Alterations in design and technical specifications are reserved.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals