fri-jado 9260200 Scale Stand Instruction Manual
- June 9, 2024
- fri-jado
Table of Contents
9260200 Scale Stand
| Doc. Nr. | Rev. | Registration form. |
|---|---|---|
| Installation instruction | ||
| 9123434 | 1 | Scale Stand 9260200 & 9260201 |
Scale stand left
– Position the Scale Stand in the left top corner of the HD on the operator side.
– For the left side version the most left fixation point (A) can be used as a
reference.
Look for a second fixation point to align one of the other slotted holes. (B)
– Remove the 2 screws and replace them with the M5x10 screws delivered in the
kit.
– Place the scale stand over the two M5x10 screws and fix them.
– Optional the scale stand can be fixed at position C.
For this mark the holes and use the self drilling screws from the kit.
– Position the Scale Stand in the right top corner of the HD on the operator
side.
– For the left side version the most left fixation point (D) can be used as a
reference.
Look for a second fixation point to align one of the other slotted holes. (E)
– Remove the 2 screws and replace them with the M5x10 screws delivered in the
kit.
– Place the scale stand over the two M5x10 screws and fix them.
– Optional the scale stand can be fixed at position F.
For this mark the holes and use the self drilling screws from the kit.
The top of the Scale Stand can be moved backwards to be able to open the front
window.
